English Expand for more options.
Home› Desktops & Servers› Aspire, Veriton and Revo Desktops

RTX 2070

1234689

FAQ & Answers

  • ven98ven98 ACE Posts: 4,074 Pathfinder
    It is technically possible to cause damage. If you connect a switch to the LED connectors it can potentially cause damages. If you connect the LED + to - and - to + it won't light up. Connecting a reset switch to pw will make it work as power switch. Overall it depends on what you connect wrong and even if you do causing damage is very rare.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Still not working :(
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    Try swapping the places of power button and LED.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 ACE Posts: 4,074 Pathfinder
    By the way what is the reason for you to think that you have damaged the motherboard? Is it because you have done something that you shouldn't have?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Unfortunately it's still not working. I swapped the led and pw with their positions the same +with - and - with + could the mother board be fried
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    Why do you think the motherboard could be fried? 

    Did you connect the CPU fan?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Yes. I think the motherboard might be fried because it's nothing is working. Everything is plugged in. 
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    Try removing the GPU to see if it will turn on.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    But you know when you plug in the psu cable and the electricity is on you kind of here this static. The switch is on but I can't hear the static
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    I wonder what is the possibility for a PSU to arrive dead. 

    Did you connect the 4pin connector for the CPU?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Let me show you how the picture looks with all cables plugged
  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Yes I connected the 4 pin. There is two of them and they are wrapped closely together.
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    Try disconnecting everything from the front panel header and leave the PW wires for power button connected only to the place shown on the diagrams from my previous post. If that doesn't help leave it like that and remove the GPU and then try to power on. 

    If that doesn't work turn off the PSU, then remove CMOS battery, wait 30 seconds and put it back again. If that doesn't work try connecting the old power supply(just connect the 24pin and 4pin to CPU) and power on.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    You mean psw I don't hv pw
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    Can you post photos of each front panel cable that you have connected to the front panel header(number 8 from the diagram)? Also write where you have connected each cable according to the diagram of the front power header as following:
    LED+ - LED +
    LED- - LED -
    PW - PW +-
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Sure I'll draw it sense I plugged them off
  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    Since* ok so here we have the + pled on the end side. I placed them horizontally. The - is next to it.then the PSW positive which is next to the pled -. Opposite to the Pled is the HD. The positive HD is opp to the + of the PLED and - HD is op of - Pled. The RS - is opp of the PSW + and the RS + is opp of - psw
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    This is the correct way.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Member Posts: 94

    Tinkerer
    also the psu that comes with acer aspire is weirdly wired onto the case.
  • ven98ven98 ACE Posts: 4,074 Pathfinder
    ven98 said:
    Try disconnecting everything from the front panel header and leave the PW wires for power button connected only to the place shown on the diagrams from my previous post. If that doesn't help leave it like that and remove the GPU and then try to power on. 

    If that doesn't work turn off the PSU, then remove CMOS battery, wait 30 seconds and put it back again. If that doesn't work try connecting the old power supply(just connect the 24pin and 4pin to CPU) and power on.
    Try this.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

Sign In or Register to comment.

Who's Online703

berid
berid
ChelleCT
ChelleCT
Cyriix
Cyriix
Daiky
Daiky
JimRad
JimRad
OKI_Olli_Ka
OKI_Olli_Ka
+697 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign-in / Register
  • The Riddle of the Sphinx
    By Acer-Ingrid -
    3D Artist Catelloo invites us to meditate on his #ConceptDo creative process when making his most recent animation ‘Donate’.When ConceptD approached me to create a 3D looping animation with the (Read more…)
    0 20

New Here?

So, what are the rules of this place? Check out our Acer Community User Agreement. Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Assistance by Acer


Drivers &
Manuals
Acer
Answers

Get Product Information
( only)
Acer Support
Videos

Member Highlight

We are honored to have Leostat in the Acer Community. With their dedication, support and effort, Leostat has become one of the main collaborators. On behalf of our Acer Community Team and all of our users, we want to recognize and thank you for your dedication!

Total Posts and Comments: 1114

Total Points:3892

Total Accepted Answers: 153

Leostat High-End Contributor

All Time Leaders

Top Solution Authors

The opinions expressed on Acer Community are the personal opinions of the authors, not of Acer. By using this site, you accept Acer's Privacy Policy and the Acer Community User Agreement.

Sign-in / Register