English Expand for more options.
› ›
Examples: Monday, today, last week, Mar 26, 3/26/04

RTX 2070

SaliwarriorSaliwarrior Posts: 94Member

Tinkerer
in Aspire Desktops
Hi there.

I am planning on purchasing one of the rtx 2070 in the next hour or so. Or as soon as I get a response.
Should I get this https://www.ebuyer.com/862940-zotac-geforce-rtx-2070-blower-8gb-graphics-card-zt-t20700a-10p

or https://www.ebuyer.com/862934-zotac-geforce-rtx-2070-amp-extreme-core-8gb-graphics-card-zt-t20700c-10p

 I have a 500w psu.

Also I am assuming the second one is OCed? 

I am upgrading from a gtx 1050 2gb to a rtx 2070 so it's a massive upgrade for me. So which ever I'd be happy to get. I DON'T want one that over heats. I am using a mid tower gaming pc Acer gx 781. What you guys think? Is it worth going that extra?

Best Answers

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    Both GPUs have the same boost clock, so they will have the same performance. Whichever one you should choose depends on your case. If the space inside the case is tight and there is no good amount of airflow go for blower style cooling. If there is sufficient airflow in the case to allow the hot air coming from the GPU to be exhausted quickly go for open air cooler.

    The zotac's graphics card from the link is with blower cooler.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    This should work in theoretically. 
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    You don't have any available 4pin molex. You have to check if the PSU has such a connector and you might have to disconnect the ODD in order to connect the GPU. It is possible that the PSU doesn't have molex, but it uses 6pin instead. If it has 6pin you can't connect it to the 8pin of the GPU and in this case you need a new PSU.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    Just to clarify the 8pin connector that is required for the GPU has to come from the PSU not the motherboard.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    I don't know where this cable is connected to you have to find that yourself. Can you post a picture of the backside of the PSU where the cables are(see picture)?


    I am not familiar with pre-built systems, so I am not sure if the PSU that your PC has is semi-modular. If there aren't any ports at the back like in the picture and if the cables are only there you have to track the cable of the molex connector and see if it goes through some other places before it goes to back to the PSU.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    OK, I just checked and your PSU doesn't have any extra connectors, so what is left for you is to track this molex.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    You disconnect everything from the old one.

    I would suggest you to go for modular PSU. You will have much less cable mess with it.

    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    I would go for the EVGA, as it is very reliable and the other PSU's brand is unknwon to me. I personally use EVGA on my build.
    As for the GPU check whether it isn't leaning on the motherboard preventing it from going in any further. This is the part I am talking about:
    I would also advice you to clean the dust out from the fan.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    If it isn't that then you have to find what is preventing the GPU from going all the way in. Maybe you have to press it a bit harder or remove it and put it back again and make sure the bus of the card is aligned parallel to the PCIe slot.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    You might also have to press the card a bit harder.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    The motherboard is not using a standard ATX form factor, so you might need a case that supports extended ATX. Before that measure length and width of the motherboard and if the width is more than 244mm, then you need an E-ATX case.

    As of whether buying a new case will make a difference, I don't know, as you have to find what is stopping the GPU from going all the way in. This case has a space for cable routing on the other side, so you won't have cables going all over the place.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    I checked the measurements are 200*244mm, so it is a bit smaller than micro-ATX. It will fit in the case from the link you've given
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    I assume you talking about the black and white cables. These are for the antenna for the WIFI card they are connected to. You can disconnect them from the wifi card and the case and then connect them back after.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    I wander how you always catch me when I am online  :o =)

    The CPU cooler doesn't have to be removed in order to remove the motherboard(you can post a picture). Using power tools on delicate components is a big no no.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer

    These are all the connections on the motherboard and what they are for.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    edited February 14 Accepted Answer
    You don't need these cables. They are most likely for the front panel I/O of the case. The same goes for the other 2 black cables, you shouldn't remove these. Why do you need to remove these by the way?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    You don't have to plug in the USB and ODD in order to operate the PC. 

    About the metal sliders, I assume you are talking about the PCIe expansion slot brackets. You should snap them off, but only the ones you need. 
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    Yes they connect to number 8, but you have to connect each on a specific pin.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045 Pathfinder
    Accepted Answer
    That is fine, it is just that having cable spaghetti in the case blocks airflow and collects dust(despite the case having a dust filter, there will still be dust getting inside).
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

«13456789

FAQ & Answers

  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    I want to upgrade from a gtx 1050 2gb to a RTX 2070 8gb. I was wondering if the motherboard, was compatible with the graphic card. It's a GX 781. H My CPU is I5 7400. I know that if I buy a rtx 2070 I won't unlock it's full potential but it will give me an extra FPS kick of around 30 or even more from the previous gpu even with CPU bottleneck because I tested a black desert online on my pc which gave me 30-40 FPS on medium setting and on my brother's who is running the same cpu but better a 1060 gtx 3gb is getting 60 fps on remastered which is high graphic setting. I reckon I can get 30 fps higher than my brother's on remastered and + other games.

    Also my psu is 500w. Do I have to upgrade it? I'd rather hope not.

  • ven98ven98 Posts: 4,045ACE Pathfinder
    I think 500w is enough for RTX 2070 and i5 7400. The motherboard is also compatible, just make sure that the graphics card you are planning to purchase fits in the case and I wouldn't advice overclocking the GPU with this PSU.

    The CPU doesn't care about graphics settings, but it determines the maximum fps of the game. This means with the better GPU you can increase the graphics quality to reduce the CPU bottleneck in fps and use most of the GPU.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    I am planning on buying one of these this week or the next. https://www.ebuyer.com/869769-msi-geforce-rtx-2070-ventus-8gb-graphics-card-rtx-2070-ventus-8g
    or https://www.ebuyer.com/862940-zotac-geforce-rtx-2070-blower-8gb-graphics-card-zt-t20700a-10p

    Which is better?
  • ven98ven98 Posts: 4,045ACE Pathfinder
    Accepted Answer
    Both GPUs have the same boost clock, so they will have the same performance. Whichever one you should choose depends on your case. If the space inside the case is tight and there is no good amount of airflow go for blower style cooling. If there is sufficient airflow in the case to allow the hot air coming from the GPU to be exhausted quickly go for open air cooler.

    The zotac's graphics card from the link is with blower cooler.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    Yes thank you very much. I was leaning towards the Zotac, and now that you've mentioned it. It makes sense because I have a zotac gtx 1050
  • Rudy21Rudy21 Posts: 1,322ACE Pioneer
    Hi there.

    I am planning on purchasing one of the rtx 2070 in the next hour or so. Or as soon as I get a response.
    Should I get this https://www.ebuyer.com/862940-zotac-geforce-rtx-2070-blower-8gb-graphics-card-zt-t20700a-10p

    or https://www.ebuyer.com/862934-zotac-geforce-rtx-2070-amp-extreme-core-8gb-graphics-card-zt-t20700c-10p

     I have a 500w psu.

    Also I am assuming the second one is OCed? 

    I am upgrading from a gtx 1050 2gb to a rtx 2070 so it's a massive upgrade for me. So which ever I'd be happy to get. I DON'T want one that over heats. I am using a mid tower gaming pc Acer gx 781. What you guys think? Is it worth going that extra?
    I would recommend this https://www.ebuyer.com/862934-zotac-geforce-rtx-2070-amp-extreme-core-8gb-graphics-card-zt-t20700c-10p

    Its one of the best. Adding it with other compatible parts it turns out as a beast. 

    Im planning to get one of this for a long time.. 
    Click on 'Yes' if the comment answers your question
    Hit 'Like' if you find the answer helpful!  :)  :)
  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    Okay thanks for info. But will it be good with my psu as mine is 500. It recommends 550 I use a i5 7400 and 8 ddr4 
    Other component probs don't consume much. But would it be good
  • ven98ven98 Posts: 4,045ACE Pathfinder
    What is model number of the PC that you are using?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • Rudy21Rudy21 Posts: 1,322ACE Pioneer
    Okay thanks for info. But will it be good with my psu as mine is 500. It recommends 550 I use a i5 7400 and 8 ddr4 
    Other component probs don't consume much. But would it be good
    Yeah thats a good point. I actually missed it out of anxiety to see another user looking to purchase the same part i'm intrested in.. 

    PSU definitely matters. Most of the time incompatible PSU might cause problems to other hardware components.

    https://www.ebuyer.com/862940-zotac-geforce-rtx-2070-blower-8gb-graphics-card-zt-t20700a-10p this does the same as the other one but not to the extent.

    If you consider changing PSU then my recommendation still remains same..  
    Click on 'Yes' if the comment answers your question
    Hit 'Like' if you find the answer helpful!  :)  :)
  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    340.08k05.04E1
  • ven98ven98 Posts: 4,045ACE Pathfinder
    I can't find this part number in Acer's database. Can you post the model number. For example N50-600
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    Aspire GX 781

  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    edited February 7
    I can oc my gpu right?
  • Rudy21Rudy21 Posts: 1,322ACE Pioneer
    Saliwarrior said:
    I can oc my gpu right?
    yes
    Click on 'Yes' if the comment answers your question
    Hit 'Like' if you find the answer helpful!  :)  :)
  • ven98ven98 Posts: 4,045ACE Pathfinder
    Are sure the triple fan cooler GPU will fit in your case? 
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98ven98 Posts: 4,045ACE Pathfinder
    If I had your PC I would go with this GPU:
    https://www.ebuyer.com/862940-zotac-geforce-rtx-2070-blower-8gb-graphics-card-zt-t20700a-10p

    I wouldn't advice any kind of overclocking with 500W PSU.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    I might need to take off the plastic that was holding my gpu from bending. In terms of length it might be a bit difficult to fit it in. But Possibly. It's my first time buying a completely different size. My pc measures just over 14 inches but there is this metal shielding of around 4 inches. I might be able to slide gpu inside and twist and turn without breaking the chip
  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    Okay thanks. Purchase made :)


    thank you guys for help.
  • SaliwarriorSaliwarrior Posts: 94Member

    Tinkerer
    So I bought. The graphic card and barely managed to fit it in. it works everything turned on and all components work that includes the graphic card fan. But I can no display from monitor screen. The gpu does wobble a bit when I insert the HDMI. But don't know why it's not showing also there is like 8 pin but I got no connector?
  • ven98ven98 Posts: 4,045ACE Pathfinder
    You need an 8 pin connector for the GPU to work, because the PCIe port can only provide up to 75W, which isn't enough to power it.

    The PSU is using a standard ATX form factor, so any ATX PSU will fit.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

Sign In or Register to comment.

Who's Online193

Acer-Karp
Acer-Karp
Alex90
Alex90
bsowles
bsowles
Cmarroquin
Cmarroquin
Dave32i
Dave32i
DocBo
DocBo
Dynamitharry63
Dynamitharry63
egydiocoelho
egydiocoelho
ferna_mn
ferna_mn
Gramphos
Gramphos
JohnCena
JohnCena
JPambattu
JPambattu
miguelarrieta
miguelarrieta
neverthemore
neverthemore
SaNTHOSHKUMAR
SaNTHOSHKUMAR
YUP25
YUP25
+177 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign-in / Register

New Here?

So, what are the rules of this place? Check out our Acer Community User Agreement. Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Assistance by Acer

All Time Leaders

Top Solution Authors

Intel Extreme KAtowise 2019
Predator Join the forum discussions on our
Predator line of products.
Find out about the Acer ACE program.

The opinions expressed on Acer Community are the personal opinions of the authors, not of Acer. By using this site, you accept Acer's Privacy Policy and the Acer Community User Agreement.

Sign-in / Register