Acer Extensa 215-52 Dual boot: Hard disk partitions not showing up on ubuntu installation

123457»

Answers

  • Nitinn
    Nitinn Member Posts: 11 New User

    @ZXD please tell me what is the solution of this problem I have the same scenario here.

    PLEASE HELP :)

  • Nitinn
    Nitinn Member Posts: 11 New User

    @JackE Please tell if you have any fix .

    As far as I got to know from the above conversation that I have to change HDD1 to HDD0 , So that my Linux installer detects the hard drive.

    PLEASE HELP :)

  • JackE
    JackE ACE Posts: 45,088 Trailblazer

    Nitinn Does your BIOS information tab show both drives HDD0 & HDD1?

    Jack E/NJ

  • Nitinn
    Nitinn Member Posts: 11 New User

    @JackE yes it shows HDD0 and HDD1

    The Drive is listed on the HDD1 slot..

  • Nitinn
    Nitinn Member Posts: 11 New User

    HDD0 slot shows - **None**

  • JackE
    JackE ACE Posts: 45,088 Trailblazer

    > >HDD0 slot shows - **None**> >

    This means the BIOS hardware only detects one bootable drive. And it has no free space available to install ubuntu.

    Jack E/NJ

  • Nitinn
    Nitinn Member Posts: 11 New User

    there any way to install…

    Linux

  • JackE
    JackE ACE Posts: 45,088 Trailblazer

    Sure. Use Windows Disk Management app to shrink the Windows partition on the existing boot drive. This creates an unallocated space on the drive for the Ubuntu partition.

    Jack E/NJ

  • Nitinn
    Nitinn Member Posts: 11 New User

    I have tried it but my HDD does not shows up in the linux installer..

    It shows like this..only

  • JackE
    JackE ACE Posts: 45,088 Trailblazer

    Please post a phone photo or screenshot of Windows Disk Management app.

    Jack E/NJ

  • Nitinn
    Nitinn Member Posts: 11 New User

    As you said…

  • JackE
    JackE ACE Posts: 45,088 Trailblazer

    There is currently no UNallocated free space for the Linux partition on your boot drive C. All the free space is now allocated to the Windows.

    So you must shrink (eg UNalllocate), the free space in the Windows C partition. Select the C partition and perform the shrink procedure under the Action menuitem. Shrink the Windows partition by about 150GB UNallocated free space for installing the Linux partition.

    Jack E/NJ

This discussion has been closed.