Tachi13 Skilled Fixer

Hi @FloridaArt Do a reset. Try holding the reload button (4th button from the top left) and turn on the computer (press and release power). Unit should turn on, if not, Hold ESC and reload and turn on the unit, if unit turns on, Try Ctrl + D, then tap ENTER, Space, ENTER as per the prompts to reset the unit. that should…

Search for TPM in settings and see if it's spec version is 2.0 and make sure you enable secure boot from the BIOS settings. If all good, then you should get windows 11 update. firstly, make sure your windows 10 is activated as Home or Pro.

Oh that's terrible to happen. But the KB has to be changed, there's a lot of work to do. It's surprising that the whole unit was not spoiled by the liquid damage. If they are reputed, then you can go for it. Or you can connect an external KB with the unit and work with it. 

Hello Hello, I didn't use anything like it, but I came across this link for you, it says Nitro 5 fit the bill and recently passed Oculus Ready certification. 

The latest version would be 96.0.4664.77. If you're looking at 94.0.4606.124 try updating, if it's not updating, maybe your device has stopped receiving updates because the device could be old for new updates, or wait untill update goes wide for all Chromebooks.

Try going to BIOS and load default settings, do a power drain, look at the bottom of the unit, look for the pinhole and use a pin to reset the battery by pressing and holding on the pinhole for 30 seconds. Then go to BIOS by tapping F2 on boot and load default settings by going to the exit menu on BIOS and then save…

@Timothy32123 Clean a computer and keeping it that way is hard. you first have to use a dry cloth to wipe out dusts and dirt, then spray Mr.clean on a clean lint free cloth and wipe the body of the computer. then use a microfibre cloth on it in a circular motion, again, again and again. use a clean microfibre cloth again…

Hello, I hope this helps. Please click on this link.

You can download the application by providing your SNID here in this is link, you'll be able to see Predator sense in the Application section.

Tried long press power button for 20 seconds without charger? Tried F2 to get into BIOS while booting and loading default BIOS settings? If those didn't help, also try reinstalling the battery drivers, both for adapter and battery, simple, uninstall device only, don't check the drivers on the next screen. Once it's done,…

Why not? If the monitor can do a 144Hz/165Hz, you can use any monitor that does it. when you plug into the HDMI or DP from the laptop, you get a direct connection from the GPU, so you can do it, + you can see massive boost on the FPS than the Laptop's screen. 

@mrmurphy Do you have the specs of the PSU? can you help me with the first ten characters of the your SN as well? You can definitely swap the GPU, my friend. PSU plays a role in distributing power to the high end gpu. for example, low profile like 710 GT doesn't need power cable plugged in, but RTXs does. I hope it gives…

As those unit comes with different Specs, please help me with the specs you've got, you can swap your Nvidia graphic and with your Radeon R9 360, you just had to install the drivers for the AMD GPU, that's it. Why don't you upgrade to a better one instead of balancing the rig to run latest games? 

Please try this: Hold or repeatedly Tap F2 to get into BIOS. Go to EXIT tab, Load default settings, then save and exit. Alternatively you can try F9>ENTER>F10>ENTER in BIOS setup screen. Then go to device manager, go to battery driver, then uninstall both the devices you see in there, do not uninstall the driver(Don't…

@ThermoNari By "Buzzing" do you mean that the fan is making noise? if yes, it's normal. if not, if you think it's like electricity buzzing, please send it for diagnostics to acer service center. You can also try loading default BIOS settings. repeatedly Tap or just HOLD F2 while turning on the computer to go to BIOS setup.…

Hey @Ze_R0 There is no Predator sense app for Linux. You can try and control the speed of your fan through BIOS, but the app is only available for windows.

You cannot possibly get a 3TB or 7TB M.2 SSD to upgrade. Try 2TB SSD or M.2 NVMe.

Try checking for Sound video or game controllers frm Device Manager. Try to check for updates. Go to BIOS, but tapping F2 while boot. Tap F9 to load default BIOs settings, and then Tap ENTER to confirm. Then Tap F10 and then ENTER to save and exit. You can also do this by going to EXIT tab on BIOS menu.

You may have to reinstall windows. try holding ALT and tapping F10 repeatedly while the computer turns on, click on Troubleshoot > Reset this PC > Keep my files > Local reinstall. The other way is, follow this link. 

@PeterB72 The computer meets the requirements for the EVO classifications, but it is so mysterious was not mentioned as Intel EVO i5-1135G7. Call out the Acer store support and just ask if this is EVO certified, but I believe it is.