Examples: Monday, today, last week, Mar 26, 3/26/04

NitroSense software does not open, but it shows up on task manager(Nitro AN515-52)

Anthony81Anthony81 Posts: 13Member

Tinkerer

edited February 15 in Nitro and Aspire Gaming
System Model Nitro AN515-52
NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
«1

FAQ & Answers

  • dclanzdclanz Posts: 112Member Skilled Fixer
    Hi Anthony, can you use system restore to go back to a point when you know it was still functional?
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • Anthony81Anthony81 Posts: 13Member

    Tinkerer

    dclanz said:
    Hi Anthony, can you use system restore to go back to a point when you know it was still functional?

    Not sure, because I opened it when I first turned on the laptop, after that it stopped working. I will check if I can go back.
  • dclanzdclanz Posts: 112Member Skilled Fixer
    Anthony81 said:
    dclanz said:
    Hi Anthony, can you use system restore to go back to a point when you know it was still functional?

    Not sure, because I opened it when I first turned on the laptop, after that it stopped working. I will check if I can go back.
    That's pretty strange, and rebooting the computer doesn't allow it to start as normal. In an event like this once you can identify the time period when it stopped working and select a restore point before that, it should actually work. Failing that you may have to reset Windows 10 as you said uninstalling/reinstalling nitro sense does not work.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kmgkmg Posts: 3Member New User
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


  • dclanzdclanz Posts: 112Member Skilled Fixer
    kmg said:
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


    As I was perusing your post, I was checking my task manager against yours and all I saw was the 3 bottom services beginning with PS. When I opened Nitro Sense, then I got the two at the top. From your post, it seems something probably got updated over time that messes with the normal launch of the app. In my opinion beyond a restore of the OS, the only thing I can think of which may fix the issue is an updated version of Nitro Sense. However, do you have any utilities like Intel Extreme Tuning Utility or other hardware monitoring/overclocking utilities installed? If you do, it won't hurt to uninstall, reboot and try Nitro Sense again. Let us know if you have any success isolating and/or correcting the issue.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • Red_SunRed_Sun Posts: 83Member Fixer
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
  • dclanzdclanz Posts: 112Member Skilled Fixer
    Red_Sun said:
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
    Interesting Red, since Nitro Sense have been functioning for me I have yet to fiddle speedfan (if it ain't broke leave it alone lol). From your link earlier it seems blazerx46 got it to work: https://community.acer.com/en/discussion/543731/guys-do-we-have-to-download-nitrosense-for-acer-nitro-5 Can anyone confirm this fix?
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kmgkmg Posts: 3Member New User
    dclanz said:
    kmg said:
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


    As I was perusing your post, I was checking my task manager against yours and all I saw was the 3 bottom services beginning with PS. When I opened Nitro Sense, then I got the two at the top. From your post, it seems something probably got updated over time that messes with the normal launch of the app. In my opinion beyond a restore of the OS, the only thing I can think of which may fix the issue is an updated version of Nitro Sense. However, do you have any utilities like Intel Extreme Tuning Utility or other hardware monitoring/overclocking utilities installed? If you do, it won't hurt to uninstall, reboot and try Nitro Sense again. Let us know if you have any success isolating and/or correcting the issue.
    @dclanz: I do not have any hardware monitoring or overclocking utilities installed.

    Red_Sun said:
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
    @Red_Sun: I've tried the method (running b6d27df9d58b4baf8a067b8f39aa872a) and a pop-up box showing "NitroSense_V31 is already installed". However, when I clicked the "Launch" button, another "NitroSense" box popped up and disappeared.



    Seems like would need to wait for a newer version of the NitroSense to test whether it would work. :'(

    Thanks both for the prompt response. =)
  • dclanzdclanz Posts: 112Member Skilled Fixer
    @kmg No problem buddy, if anything someone may reply here if they've found a solution.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • Red_SunRed_Sun Posts: 83Member Fixer
    kmg said:
    dclanz said:
    kmg said:
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


    As I was perusing your post, I was checking my task manager against yours and all I saw was the 3 bottom services beginning with PS. When I opened Nitro Sense, then I got the two at the top. From your post, it seems something probably got updated over time that messes with the normal launch of the app. In my opinion beyond a restore of the OS, the only thing I can think of which may fix the issue is an updated version of Nitro Sense. However, do you have any utilities like Intel Extreme Tuning Utility or other hardware monitoring/overclocking utilities installed? If you do, it won't hurt to uninstall, reboot and try Nitro Sense again. Let us know if you have any success isolating and/or correcting the issue.
    @dclanz: I do not have any hardware monitoring or overclocking utilities installed.

    Red_Sun said:
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
    @Red_Sun: I've tried the method (running b6d27df9d58b4baf8a067b8f39aa872a) and a pop-up box showing "NitroSense_V31 is already installed". However, when I clicked the "Launch" button, another "NitroSense" box popped up and disappeared.



    Seems like would need to wait for a newer version of the NitroSense to test whether it would work. :'(

    Thanks both for the prompt response. =)
    Darn. When I clicked on that line Nitro Sense just magically started, no popup. Alright, I will report back if I find any good ideas...
  • meandmyselfmeandmyself Posts: 1Member New User
    been using this laptop for 3 weeks now, running against the same problems at the moment. tried reinstalling and reconfiguring nitrosense, best i can get it is the logo to loop itself on a startup cyckle but it doesn't run anymore which was strange because yesterday it was working fine. contacted the actual acer helpdesk and even they dont know whats wrong. strange to me that a program thats from acer itself malfunctions like this and cannot be fixxed, specially because i own this laptop ( Nitro 5 AN515-52) for just about a month to 3 weeks. ill try to do a system reset to yesterday but even this seems scetchy since it tells me to FIRST delete all the files before i can even see what the last system restore save was..... so yeah. all with all great laptop but this just lets me down :/ 
  • dclanzdclanz Posts: 112Member Skilled Fixer
    been using this laptop for 3 weeks now, running against the same problems at the moment. tried reinstalling and reconfiguring nitrosense, best i can get it is the logo to loop itself on a startup cyckle but it doesn't run anymore which was strange because yesterday it was working fine. contacted the actual acer helpdesk and even they dont know whats wrong. strange to me that a program thats from acer itself malfunctions like this and cannot be fixxed, specially because i own this laptop ( Nitro 5 AN515-52) for just about a month to 3 weeks. ill try to do a system reset to yesterday but even this seems scetchy since it tells me to FIRST delete all the files before i can even see what the last system restore save was..... so yeah. all with all great laptop but this just lets me down :/ 
    Hi @meandmyself : Try downloading it first from here https://global-download.acer.com/GDFiles/Application/Nitro Sense/Nitro Sense_Acer_3.01.3000_W10x64_A.zip?acerid=636625537111450948&Step1=NOTEBOOK&Step2=NITRO&Step3=NITRO AN515-42&OS=ALL&LC=en&BC=ACER&SC=PA_6
    Then uninstall the version you currently have (this includes Nitro Sense and Nitro Sense Service). Restart if prompted otherwise next up, extract the NitroSense_3.01.3000_W10x64 folder to your desktop. Inside the folder, open up the v3.01.3000 folder and run Setup. This will install the Nitro Sense Service. Once that is completed go into the NitroSenseV3.1 folder and double click the b6d27df9d58b4baf8a067b8f39aa872a file to begin the install of Nitro Sense itself. Upon completion, reboot the computer and try to launch the Nitro Sense program again. Hope this helps.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kaflebishal0123kaflebishal0123 Posts: 5Member

    Tinkerer

    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
     same problem is occuring on my computer too. please somebody help.....

  • kaflebishal0123kaflebishal0123 Posts: 5Member

    Tinkerer

    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
      same problem
  • dclanzdclanz Posts: 112Member Skilled Fixer
    As an update, I finally wiped the system with a clean install of Windows 10 instead of restoring Acer's image of it. Ran Windows update and got everything updated then I installed only the Acer Quick Access, Nitro Sense and Realtek Drivers (this last one is important if you want to get back the Dolby software running in the task tray). Had no problems with Nitro Sense installing or running. This however, may not be a choice for some users but for those willing to do it, Nitro Sense does function with a clean install also.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kaflebishal0123kaflebishal0123 Posts: 5Member

    Tinkerer

    dclanz said:
    As an update, I finally wiped the system with a clean install of Windows 10 instead of restoring Acer's image of it. Ran Windows update and got everything updated then I installed only the Acer Quick Access, Nitro Sense and Realtek Drivers (this last one is important if you want to get back the Dolby software running in the task tray). Had no problems with Nitro Sense installing or running. This however, may not be a choice for some users but for those willing to do it, Nitro Sense does function with a clean install also.
      how to do a clean install of window without losing any data. will you please tell me?
  • imutant99imutant99 Posts: 3Member New User
    I solved it.
    1. Find your drivers on the Acer site.
    2. Click application column, download the app
    3.0 Don't run any other file, run setup.exe ( might be inside any sub-folder )
    3.1 in first run it will remove existing files
    3.2 finish & run again to install the files
    4. There will be a file of type APPXBUNDLE FILE run it ( therest only 1 file of this type in whole package )
    4.1 internet connection is required here, else there will be errors like files not found ( this is the main error )
    4.2 windows will ask whether app should be allowed, allow it.
    Congo, u just install it.
  • Ak_0Ak_0 Posts: 1Member New User
    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
    I read both of your posts. I bought the same laptop few days ago. I am facing the same battery drain issues after a well of usage as well it's getting laggy sometimes. Not as smooth as it was the first day. I have a power to return this laptop and get a refund, do you suggest me to do so? Let me know soon! 
  • anuraagkhare2121anuraagkhare2121 Posts: 32Member Die Hard
    I had the same problem. Here's what got me solved:-
    1)Uninstalled both acer nitrosense app and acer nitro sense service
    2)Reboot
    3)Download latest Nitro sense drivers from support page
    4)Run setup.exe first. It will install only acer nitrosense services.
    5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
    6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
    7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
    Now NitroSense should open perfectly. If not try again after a reboot.
Sign In or Register to comment.

Who's Online123

ahmetrkarabulut
ahmetrkarabulut
Cyriix
Cyriix
johnboy73
johnboy73
Saturn
Saturn
TECH_MAN
TECH_MAN
xapim
xapim
+117 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

New Here?

So, what are the rules of this place? Check out our Acer Community User Agreement. Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Member Highlight

We would like to feature andylb as a destacated member in the Acer Community. With his dedication and support efforts, andylb has become a Valued Contributor . On behalf of the Acer Community team and all our users, we want to recognize and thank you for your dedication!

Total Posts and Comments: 1012

Total Points:2587

Total Accepted Answers: 125

andylb Valued Contributor
Intel Extreme KAtowise 2019
Predator Join the forum discussions on our
Predator line of products.
Find out about the Acer ACE program.