English Expand for more options.
Home› Gaming› Nitro and Aspire Gaming
image

NitroSense software does not open, but it shows up on task manager(Nitro AN515-52)

Anthony81Anthony81 Member Posts: 44 Enthusiast
edited February 2019 in Nitro and Aspire Gaming
System Model Nitro AN515-52
NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.

Best Answers

  • MalQyMalQy Member Posts: 1 New User
    Accepted Answer
    Hi guys I found a fix that works for me....you need to run every highlighted application in installed nitrosense folder and then go to folder that you downloaded from acer site with setup files and run this appxbundle file....see attachments :) hope it will work for you 
  • sheadysheady Member Posts: 3 New User
    Accepted Answer
    What i did after having the same exact problem. I'll put numbers to point directly to steps:

     (1)I uninstalled it via control panel, then, (2)i went to the Acer site and downloaded the zip file it gives you. Next,(3) i opened the NitroSenseV3.1 folder and opened the dependencies and clicked and installed each file in the x64 folder(the last file did say that i have the latest version so i didn't install that one. Then (4)i opened the app settings and tried to repair it, reset it, and then terminate it all to no avail(Now this is what triggered it to work i believe, however, maybe you should try the previous steps just in case. Doesn't hurt) then (5)i went back to the Nitro Sense download folder and clicked on the Setup.exe and installed it. Suddenly, my fans (which have been on high ever since the app stopped working) turned off and i was able to open it and it worked normally.

    I hope this helped. I was searching for an answer and ultimately had to just test things for myself.
  • RareZomieRareZomie Member Posts: 1 New User
    Accepted Answer
    imutant99 said:
    I solved it.
    1. Find your drivers on the Acer site.
    2. Click application column, download the app
    3.0 Don't run any other file, run setup.exe ( might be inside any sub-folder )
    3.1 in first run it will remove existing files
    3.2 finish & run again to install the files
    4. There will be a file of type APPXBUNDLE FILE run it ( therest only 1 file of this type in whole package )
    4.1 internet connection is required here, else there will be errors like files not found ( this is the main error )
    4.2 windows will ask whether app should be allowed, allow it.
    Congo, u just install it.
    Thanks. Works now. Plz follow this guide to get it working.
                ~Rare
  • dionysiendionysien Member Posts: 4 New User
    Accepted Answer
    kmg said:
    I think I found the solution. The issue seemed to be due to some performance counters. After running the following commands, the NitroSense application seemed to be able to start now. Cheers!



    I freaking love you man. This worked for me!!
«134

FAQ & Answers

  • dclanzdclanz Member Posts: 112 Skilled Fixer
    Hi Anthony, can you use system restore to go back to a point when you know it was still functional?
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • Anthony81Anthony81 Member Posts: 44 Enthusiast
    dclanz said:
    Hi Anthony, can you use system restore to go back to a point when you know it was still functional?

    Not sure, because I opened it when I first turned on the laptop, after that it stopped working. I will check if I can go back.
  • dclanzdclanz Member Posts: 112 Skilled Fixer
    Anthony81 said:
    dclanz said:
    Hi Anthony, can you use system restore to go back to a point when you know it was still functional?

    Not sure, because I opened it when I first turned on the laptop, after that it stopped working. I will check if I can go back.
    That's pretty strange, and rebooting the computer doesn't allow it to start as normal. In an event like this once you can identify the time period when it stopped working and select a restore point before that, it should actually work. Failing that you may have to reset Windows 10 as you said uninstalling/reinstalling nitro sense does not work.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kmgkmg Member Posts: 4 New User
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


  • dclanzdclanz Member Posts: 112 Skilled Fixer
    kmg said:
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


    As I was perusing your post, I was checking my task manager against yours and all I saw was the 3 bottom services beginning with PS. When I opened Nitro Sense, then I got the two at the top. From your post, it seems something probably got updated over time that messes with the normal launch of the app. In my opinion beyond a restore of the OS, the only thing I can think of which may fix the issue is an updated version of Nitro Sense. However, do you have any utilities like Intel Extreme Tuning Utility or other hardware monitoring/overclocking utilities installed? If you do, it won't hurt to uninstall, reboot and try Nitro Sense again. Let us know if you have any success isolating and/or correcting the issue.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • Red_SunRed_Sun Member Posts: 86 Fixer
    https://community.acer.com/en/discussion/543731/guys-do-we-have-to-download-nitrosense-for-acer-nitro-5
  • Red_SunRed_Sun Member Posts: 86 Fixer
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
  • dclanzdclanz Member Posts: 112 Skilled Fixer
    Red_Sun said:
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
    Interesting Red, since Nitro Sense have been functioning for me I have yet to fiddle speedfan (if it ain't broke leave it alone lol). From your link earlier it seems blazerx46 got it to work: https://community.acer.com/en/discussion/543731/guys-do-we-have-to-download-nitrosense-for-acer-nitro-5 Can anyone confirm this fix?
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kmgkmg Member Posts: 4 New User
    dclanz said:
    kmg said:
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


    As I was perusing your post, I was checking my task manager against yours and all I saw was the 3 bottom services beginning with PS. When I opened Nitro Sense, then I got the two at the top. From your post, it seems something probably got updated over time that messes with the normal launch of the app. In my opinion beyond a restore of the OS, the only thing I can think of which may fix the issue is an updated version of Nitro Sense. However, do you have any utilities like Intel Extreme Tuning Utility or other hardware monitoring/overclocking utilities installed? If you do, it won't hurt to uninstall, reboot and try Nitro Sense again. Let us know if you have any success isolating and/or correcting the issue.
    @dclanz: I do not have any hardware monitoring or overclocking utilities installed.

    Red_Sun said:
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
    @Red_Sun: I've tried the method (running b6d27df9d58b4baf8a067b8f39aa872a) and a pop-up box showing "NitroSense_V31 is already installed". However, when I clicked the "Launch" button, another "NitroSense" box popped up and disappeared.



    Seems like would need to wait for a newer version of the NitroSense to test whether it would work. :'(

    Thanks both for the prompt response. =)
  • dclanzdclanz Member Posts: 112 Skilled Fixer
    @kmg No problem buddy, if anything someone may reply here if they've found a solution.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • Red_SunRed_Sun Member Posts: 86 Fixer
    kmg said:
    dclanz said:
    kmg said:
    I also have the same problem. The NitroSense was working fine, and suddenly when I tried to open the application one day, the Nitrosense screen did not pop up. Tried to look into restore points, but could not find any. Also, uninstalling and reinstalling does not help. I notice in the task manager that the programs were running. Reset Windows 10 seems a bit overkill. Any other suggestions?


    As I was perusing your post, I was checking my task manager against yours and all I saw was the 3 bottom services beginning with PS. When I opened Nitro Sense, then I got the two at the top. From your post, it seems something probably got updated over time that messes with the normal launch of the app. In my opinion beyond a restore of the OS, the only thing I can think of which may fix the issue is an updated version of Nitro Sense. However, do you have any utilities like Intel Extreme Tuning Utility or other hardware monitoring/overclocking utilities installed? If you do, it won't hurt to uninstall, reboot and try Nitro Sense again. Let us know if you have any success isolating and/or correcting the issue.
    @dclanz: I do not have any hardware monitoring or overclocking utilities installed.

    Red_Sun said:
    Installed a fresh OS on a new SSD. Had the same problem. Installed, but would not open. Follow the instructions in the above link. Let us know if it works for you.

    @dclanz: I mentioned speedfan may be a viable alternative for controlling fans. MAy not be as easy as install and run. Tried it the other day and it failed to detect all but one piece of hardware.
    @Red_Sun: I've tried the method (running b6d27df9d58b4baf8a067b8f39aa872a) and a pop-up box showing "NitroSense_V31 is already installed". However, when I clicked the "Launch" button, another "NitroSense" box popped up and disappeared.



    Seems like would need to wait for a newer version of the NitroSense to test whether it would work. :'(

    Thanks both for the prompt response. =)
    Darn. When I clicked on that line Nitro Sense just magically started, no popup. Alright, I will report back if I find any good ideas...
  • meandmyselfmeandmyself Member Posts: 1 New User
    been using this laptop for 3 weeks now, running against the same problems at the moment. tried reinstalling and reconfiguring nitrosense, best i can get it is the logo to loop itself on a startup cyckle but it doesn't run anymore which was strange because yesterday it was working fine. contacted the actual acer helpdesk and even they dont know whats wrong. strange to me that a program thats from acer itself malfunctions like this and cannot be fixxed, specially because i own this laptop ( Nitro 5 AN515-52) for just about a month to 3 weeks. ill try to do a system reset to yesterday but even this seems scetchy since it tells me to FIRST delete all the files before i can even see what the last system restore save was..... so yeah. all with all great laptop but this just lets me down :/ 
  • dclanzdclanz Member Posts: 112 Skilled Fixer
    meandmyself said:
    been using this laptop for 3 weeks now, running against the same problems at the moment. tried reinstalling and reconfiguring nitrosense, best i can get it is the logo to loop itself on a startup cyckle but it doesn't run anymore which was strange because yesterday it was working fine. contacted the actual acer helpdesk and even they dont know whats wrong. strange to me that a program thats from acer itself malfunctions like this and cannot be fixxed, specially because i own this laptop ( Nitro 5 AN515-52) for just about a month to 3 weeks. ill try to do a system reset to yesterday but even this seems scetchy since it tells me to FIRST delete all the files before i can even see what the last system restore save was..... so yeah. all with all great laptop but this just lets me down :/ 
    Hi @meandmyself : Try downloading it first from here https://global-download.acer.com/GDFiles/Application/Nitro Sense/Nitro Sense_Acer_3.01.3000_W10x64_A.zip?acerid=636625537111450948&Step1=NOTEBOOK&Step2=NITRO&Step3=NITRO AN515-42&OS=ALL&LC=en&BC=ACER&SC=PA_6
    Then uninstall the version you currently have (this includes Nitro Sense and Nitro Sense Service). Restart if prompted otherwise next up, extract the NitroSense_3.01.3000_W10x64 folder to your desktop. Inside the folder, open up the v3.01.3000 folder and run Setup. This will install the Nitro Sense Service. Once that is completed go into the NitroSenseV3.1 folder and double click the b6d27df9d58b4baf8a067b8f39aa872a file to begin the install of Nitro Sense itself. Upon completion, reboot the computer and try to launch the Nitro Sense program again. Hope this helps.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kaflebishal0123kaflebishal0123 Member Posts: 9

    Tinkerer
    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
     same problem is occuring on my computer too. please somebody help.....

  • kaflebishal0123kaflebishal0123 Member Posts: 9

    Tinkerer
    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
      same problem
  • dclanzdclanz Member Posts: 112 Skilled Fixer
    As an update, I finally wiped the system with a clean install of Windows 10 instead of restoring Acer's image of it. Ran Windows update and got everything updated then I installed only the Acer Quick Access, Nitro Sense and Realtek Drivers (this last one is important if you want to get back the Dolby software running in the task tray). Had no problems with Nitro Sense installing or running. This however, may not be a choice for some users but for those willing to do it, Nitro Sense does function with a clean install also.
    If a post helps or answers your question, be sure to hit the like button so the poster knows they were helpful.
    Try using the search function before posting, as your question may have been asked and resolved before.
    Be sure to check out my Acer An515-42 Clean Install Guide.
  • kaflebishal0123kaflebishal0123 Member Posts: 9

    Tinkerer
    dclanz said:
    As an update, I finally wiped the system with a clean install of Windows 10 instead of restoring Acer's image of it. Ran Windows update and got everything updated then I installed only the Acer Quick Access, Nitro Sense and Realtek Drivers (this last one is important if you want to get back the Dolby software running in the task tray). Had no problems with Nitro Sense installing or running. This however, may not be a choice for some users but for those willing to do it, Nitro Sense does function with a clean install also.
      how to do a clean install of window without losing any data. will you please tell me?
  • imutant99imutant99 Member Posts: 3 New User
    I solved it.
    1. Find your drivers on the Acer site.
    2. Click application column, download the app
    3.0 Don't run any other file, run setup.exe ( might be inside any sub-folder )
    3.1 in first run it will remove existing files
    3.2 finish & run again to install the files
    4. There will be a file of type APPXBUNDLE FILE run it ( therest only 1 file of this type in whole package )
    4.1 internet connection is required here, else there will be errors like files not found ( this is the main error )
    4.2 windows will ask whether app should be allowed, allow it.
    Congo, u just install it.
  • Ak_0Ak_0 Member Posts: 1 New User
    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
    I read both of your posts. I bought the same laptop few days ago. I am facing the same battery drain issues after a well of usage as well it's getting laggy sometimes. Not as smooth as it was the first day. I have a power to return this laptop and get a refund, do you suggest me to do so? Let me know soon! 
  • anuraagkhare2121anuraagkhare2121 Member Posts: 35 Die Hard
    I had the same problem. Here's what got me solved:-
    1)Uninstalled both acer nitrosense app and acer nitro sense service
    2)Reboot
    3)Download latest Nitro sense drivers from support page
    4)Run setup.exe first. It will install only acer nitrosense services.
    5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
    6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
    7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
    Now NitroSense should open perfectly. If not try again after a reboot.
Sign In or Register to comment.

Who's Online530

Acer-Laura
Acer-Laura
Ayoub1
Ayoub1
batmalin
batmalin
Bear38
Bear38
DJMonchyMix
DJMonchyMix
fascounterimpact
fascounterimpact
JellyStick
JellyStick
Leostat
Leostat
NavidFj
NavidFj
OKI_Olli_Ka
OKI_Olli_Ka
Reventh7
Reventh7
SHnas
SHnas
sunny27
sunny27
Zohan02
Zohan02
+516 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign-in / Register
  • The Riddle of the Sphinx
    By Acer-Ingrid -
    3D Artist Catelloo invites us to meditate on his #ConceptDo creative process when making his most recent animation ‘Donate’.When ConceptD approached me to create a 3D looping animation with the (Read more…)
    0 23

New Here?

So, what are the rules of this place? Check out our Acer Community User Agreement. Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Assistance by Acer


Drivers &
Manuals
Acer
Answers

Get Product Information
( only)
Acer Support
Videos

Member Highlight

We are honored to have Leostat in the Acer Community. With their dedication, support and effort, Leostat has become one of the main collaborators. On behalf of our Acer Community Team and all of our users, we want to recognize and thank you for your dedication!

Total Posts and Comments: 1114

Total Points:3892

Total Accepted Answers: 153

Leostat High-End Contributor

All Time Leaders

Top Solution Authors

The opinions expressed on Acer Community are the personal opinions of the authors, not of Acer. By using this site, you accept Acer's Privacy Policy and the Acer Community User Agreement.

Sign-in / Register