NitroSense software does not open, but it shows up on task manager(Nitro AN515-52)
Answers
-
Reinstalling it works
0 -
Guys i found a solution. It finally works, i have spent 2 days in order to find it. I posted it in youtube. If you still need help check my video out
https://youtu.be/WWo9MPM-L6Y
It will definitely work for you.0 -
I've tried all the methods that are here, but Nitrosense still does not run the program / not open
0 -
All of the previous solutions didn't work for me.
But i found one useful:
1) Install Microsoft Visual C++ 2015 Update 3 RC (https://www.microsoft.com/pl-PL/download/details.aspx?id=52685)
2) Turn on all .exe in directory where you installed NitroSense
3) Turn on 'appxbundle' type file in directory where you downloaded NitroSense
Done, it worked for me
1 -
Try an update. There is a new ver. available and updates may fix the problem. Go to https://www.acer.com/ac/en/GB/content/drivers and put your model number in. then click applications. then download nitrosense. Uninstall the old nitrosense then Install the updated version. well it worked for me. but for you idkAnthony81 said:System Model Nitro AN515-52
NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.0 -
ChristianMilanov said:Thank you so much, I spent my whole day trying to fix my issue, nothing else work, finally at 20:30, I found your comment and it worked, I can’t thank you enough!
whhat happens after that?
0 -
This worked for me !!BaqraCandi said:I tried uninstall and then install and repair , reset and even installed new window ....Solution is to install latest Microsoft visual C++ 2015-2019...https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads0 -
my problem solved using this andditionally i made some tweekskmg said:I think I found the solution. The issue seemed to be due to some performance counters. After running the following commands, the NitroSense application seemed to be able to start now. Cheers!
"NitroSense_Acer_3.01.3012_W10x64\Plugs\Nitro AN515-52" (My model is nitro-ANA-515-52)
in "feature.ini" file i changed
fromType=0toType=11 -
Thanks @patrick90900 , for me the commandC:\Windows\SysWOW64>.\lodctr.exe /R
Info: Successfully rebuilt performance counter setting from system backup storedid the job.0 -
Hi,
If your problem still not solved then you can check this clean installation guide: https://community.acer.com/en/discussion/554696/acer-an515-42-clean-install-guide I hope it will clear all your queries. I was also finding the right way on how I can clean install Acer An515-42 and finally this guide solved all my ambiguties.0 -
Hey I think I have the answer. I resolve this when my Photoshop is also not opening and showing some errors about DLL files on my system. Here are the list of the DLL files you need to download, extract and paste to C:\Windows\System32
concrt140.dll
msvcp140.dll
vcruntime140.dll
vcruntime140_1.dll
You can download DLL on this site https://www.dll-files.com/
I hope you can also resolve your problem.0 -
Hey, check this installation guide https://community.acer.com/en/discussion/554696/acer-an515-42-clean-install-guide I hope this guide help you.0
-
Nice post, help me found out i didn't install the APPXBUNDLE FILE
.... I was thought the setup.exe is the installer for nitro sense
0 -
I found the solution guys on Reddit, do the following steps.MalQy said:Hi guys I found a fix that works for me....you need to run every highlighted application in installed nitrosense folder and then go to folder that you downloaded from acer site with setup files and run this appxbundle file....see attachments
hope it will work for you Uninstall Nitrosense
Go to Acer's website and download Nitrosense
Extract folder and run Setup.exe
Run Command prompt as Administrator
type in the following (without the quotation marks): ".\lodctr.exe /R"
Go back to the folder where you extracted Nitrosense
Go into "Nitrosense V3.1" folder
Run APPXBUNDLE file.
0 -
I found the solution guys on Reddit, do the following steps.AmeliaBelli said:Hi,
If your problem still not solved then you can check this clean installation guide: https://community.acer.com/en/discussion/554696/acer-an515-42-clean-install-guide I hope it will clear all your queries. I was also finding the right way on how I can clean install Acer An515-42 and finally this guide solved all my ambiguties.Uninstall Nitrosense
Go to Acer's website and download Nitrosense
Extract folder and run Setup.exe
Run Command prompt as Administrator
type in the following (without the quotation marks): ".\lodctr.exe /R"
Go back to the folder where you extracted Nitrosense
Go into "Nitrosense V3.1" folder
Run APPXBUNDLE file.
0 -
Note: This is the third time commenting on this so I hope you can find this comment.
I found the solution guys on Reddit, do the following steps.
Please reply if you have any errors.Uninstall Nitrosense
Go to Acer's website and download Nitrosense
Extract the folder and run Setup.exe
Run Command prompt as Administrator
type in the following (without the quotation marks): ".\lodctr.exe /R" (In the first time typing the command, it will show that it is unsuccessful, the command should work the second time)
Go back to the folder where you extracted Nitrosense
Go into the "Nitrosense V3.1" folder
Run the APPXBUNDLE file.
Click launch.
0 -
Works for me, thank you so much for the solution! You,'re great 😊
0
This discussion has been closed.
