acer aspire es1-571 ram upgrade
Tinkerer
i have installed an 8 gb ram in my acer aspire es1-571 laptop in the second slot.[4gb ram was already in the first slot].After intslling when i checked in the System properties it is showing 12 gb ram,dxdiag is also showing the same.But my system is performing the same as it performs when there is only 4gb ram.After noticing it i checked in the task manager .there i see that it is showing 12 gb total ram but in the slots section it is showing slot1=4gb and slot2=empty. How is that possible please help me.
Best Answer
-
I think the 8gb ram you have bought is intended to be used as a main ram. So try connecting it on the place where the 4gb ram is(swap their places).
What happens in a single channel a RAM stick with bandwidth of 64bit is seen as 64bit by the system. Dual-channel enables the memory controllers to utilize 2 64bit channels to work as one thus making it 128bit and therefore with higher bandwidth the data transfer speeds are also faster. To have a dual channel memory the motherboard should support it and requires 2 identical RAM sticks.Always post the following characterisitcs of the device:
-Model number
-Part number(not required, but helpful)
-CPU
-GPU-Operating systemHelios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.
Hit 'Like' if you find the answer helpful!
Click on 'Yes' if the comment answers your question!0
Answers
-
http://community.acer.com/t5/Nitro-and-Aspire-Gaming/Usable-Memory-Only-1-4GB-RAM-recognized-of-6GB-Acer-Aspire-V5/m-p/529342#M18210
This person has a similar issue. You can have a look at the thread.
Have you tried turning the laptop on with the 8gb ram only connected at the place where the 4gb ram is. If not try, if it is possible.
What is the brand and model of the 8gb ram stick?Always post the following characterisitcs of the device:
-Model number
-Part number(not required, but helpful)
-CPU
-GPU-Operating systemHelios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.
Hit 'Like' if you find the answer helpful!
Click on 'Yes' if the comment answers your question!0 -
Hi,
It might not have been inserted properly, what happens if you switch the modules around or reinstall it?
0 -
No i haven't tried.
You can check the description of 8gb stick here :
Also,is there any difference betwen single channel and dual channel?This one is dual channel but the default one is Single. You can see the images here.
https://ibb.co/mzfSvb
https://ibb.co/kNLuab
https://ibb.co/cdi2Tw0 -
I think the 8gb ram you have bought is intended to be used as a main ram. So try connecting it on the place where the 4gb ram is(swap their places).
What happens in a single channel a RAM stick with bandwidth of 64bit is seen as 64bit by the system. Dual-channel enables the memory controllers to utilize 2 64bit channels to work as one thus making it 128bit and therefore with higher bandwidth the data transfer speeds are also faster. To have a dual channel memory the motherboard should support it and requires 2 identical RAM sticks.Always post the following characterisitcs of the device:
-Model number
-Part number(not required, but helpful)
-CPU
-GPU-Operating systemHelios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.
Hit 'Like' if you find the answer helpful!
Click on 'Yes' if the comment answers your question!0 -
Hi,
Install CPU-z, go to SPD tab, check all the slots(mainly slot3) with drop down arrow.
https://www.cpuid.com/softwares/cpu-z.html
0 -
So, to use this my both ram sticks should be dual channel.[I'm sure this motherboard supports it].
0 -
Hi,
No, you can use single and dual channel mixed RAM modules.
0 -
Yes but it is likely thaf they won't work as good as having 2 of the same type.Always post the following characterisitcs of the device:
-Model number
-Part number(not required, but helpful)
-CPU
-GPU-Operating systemHelios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.
Hit 'Like' if you find the answer helpful!
Click on 'Yes' if the comment answers your question!0 -
i have opened the lap to swap the ram sticks.but as i am going to do this for the first time , i need help.
..i am attaching a snapshot of what i'm seeing right now.
now how to remove them.
0 -
Hi,
Slowly push both retainer clips outwards with fingers and the module will pop up at an angle, remove them slowly.
0 -
Thanks. U people helped me a lot. (Y) but now I'm a new trouble after assembling the laptop the WiFi feature is not visible. I have checked the WiFi card its properly attached. So what can be the problem now.0
-
I think the wifi card could be disabled now. You can go to device manager and enable it from there. If it doesn't work connect to ethernet and then uninstall and install the driver.Always post the following characterisitcs of the device:
-Model number
-Part number(not required, but helpful)
-CPU
-GPU-Operating systemHelios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.
Hit 'Like' if you find the answer helpful!
Click on 'Yes' if the comment answers your question!0 -
Can i add Another Ram stick in my laptop Aspire E 15 ES1-571-33VV
Also how much can extend the Ram
and what is the existing ram channel for my model plzz help i want to transform this laptop into a gaming laptop
0 -
Shubham19 said:Can i add Another Ram stick in my laptop Aspire E 15 ES1-571-33VV
Also how much can extend the Ram
and what is the existing ram channel for my model plzz help i want to transform this laptop into a gaming laptop
You can upgrade up to 16GB(2x8GB), DDR3L SODIMM 1600MHz.
http://www.crucial.com/usa/en/compatible-upgrade-for/Acer/aspire-es1-571
0 -
utkarsh19 said:
i have installed an 8 gb ram in my acer aspire es1-571 laptop in the second slot.[4gb ram was already in the first slot].After intslling when i checked in the System properties it is showing 12 gb ram,dxdiag is also showing the same.But my system is performing the same as it performs when there is only 4gb ram.After noticing it i checked in the task manager .there i see that it is showing 12 gb total ram but in the slots section it is showing slot1=4gb and slot2=empty. How is that possible please help me.
utkarsh19 said:i have installed an 8 gb ram in my acer aspire es1-571 laptop in the second slot.[4gb ram was already in the first slot].After intslling when i checked in the System properties it is showing 12 gb ram,dxdiag is also showing the same.But my system is performing the same as it performs when there is only 4gb ram.After noticing it i checked in the task manager .there i see that it is showing 12 gb total ram but in the slots section it is showing slot1=4gb and slot2=empty. How is that possible please help me.
0