Error when tryng to update USB Type C Dock III firmware in TravelMate P4

SeeDoubleOh
SeeDoubleOh Member Posts: 1 New User
edited October 29 in TravelMate and Extensa

I'm getting this error message:

"Error: ISP VmmUpdater.exe check firmware fail. Please make sure the dock with external display device has been inserted.

Composite version: 1.3.0.0

DMC Version: 3.3.1.2010

HUB Version: 4051

Power Delivery Version: 3.3.0.1753

Tool version: 1.0.3.3 downloaded here.

I do have a monitor connected to the dock and it's working fine. I've tried HDMI and DP on the dock itself. Tried 2 different docks of the same model, but hadd the same issue with both.

NTB is an ACER TravelMate P4 running W10.

[Edited the thread to add model number to the title]

Answers

  • StevenGen
    StevenGen ACE Posts: 12,508 Trailblazer

    The firmware version 1.0 should not be done with the dock connected to anything in its ports or a monitor, Connect the Acer USB Type C Dock III to your TravelMate P4 with as USB-C cable as per the hubs directions of its USB Type-C port - Connects to USB Type-C devices for data transfer only and update the firmare version 1.0 that way and don't use any other cable. Good luck.

    #9 - USB Type-C port - Connects to USB Type-C devices for data transfer only

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • JeffSch
    JeffSch Member Posts: 1 New User

    I have this same issue. I only have the Power and USB Type-c cable connected