Swift SFE16-43(Swift Edge16) USB 4.0 port does not work properly

PAPKY
PAPKY Member Posts: 6

Tinkerer

edited August 17 in Swift and Spin Series

USB 4.0 port PD charging is possible but Monitor connection and USB connection are not possible. Please tell me how to solve it

Best Answer

  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer
    Answer ✓

    A hard reset consists of taking the back cover off then take the main battery out and disconnect the bios battery, short the +&- pins of the bios battery at the mainboard plug to reset CMOS, leave the laptop like that for about 5 min and reassemble everything as this resets the EC chips that governs the USB-C functions. See if this works.

    Main Battery

    RTC/BIOS Battery

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,439 Pathfinder

    @PAPKY

    Are you using only 1 adapter for the monitor and USB connection? Do you have any other adapter for testing?

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,439 Pathfinder
    edited August 17

    @PAPKY

    This machine has two USB-C port which support PD charging, display output, and USB connection.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer

    If you want to connect an external monitor to the USB-C ports on the left side, connect the monitor with a DP to USB-C cable with the DP lug connected to the monitor and the USB-C to the SFC16-43 port or you can connect to the HDMI 2.1 port.

    SFE16-43 USB-C ports specs

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • PAPKY
    PAPKY Member Posts: 6

    Tinkerer

    @AnhEZ28

    This machine has two USB-C port which support PD charging, display output, and USB connection.

    However, neither port has any function other than PD charging.

    Is this a BIOS issue or a driver issue?

    Other USB ports other than the USB-C port work fine.

    Thank you for helping me.

  • PAPKY
    PAPKY Member Posts: 6

    Tinkerer

    I know how to connect. connected and used it before.

    I recently tried to use it again, but it was impossible.

    All functions other than PD charging are not working.

    Thank you for helping me.

  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer

    Have you got the last bios version 1.64 installed, as that bios "Updates EC version" as that should improve EC chip functions which commands the USB-C ports functions. As the USB-C is a type USB4 port and should work as a display port also. Otherwise do a hard reset and see if that resets the EC chip.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • PAPKY
    PAPKY Member Posts: 6

    Tinkerer

    I've previously used it by connecting it to a monitor with a USB-C port.

    When I recently tried to use it again, all features other than PD charging are not working.

    Thank you for helping me.

  • PAPKY
    PAPKY Member Posts: 6

    Tinkerer

    The bios version is already 1.64 version.
    If you tell me how to do a hard reset, I will try it. Thank you.

  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer
    Answer ✓

    A hard reset consists of taking the back cover off then take the main battery out and disconnect the bios battery, short the +&- pins of the bios battery at the mainboard plug to reset CMOS, leave the laptop like that for about 5 min and reassemble everything as this resets the EC chips that governs the USB-C functions. See if this works.

    Main Battery

    RTC/BIOS Battery

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • Puraw
    Puraw ACE, Member Posts: 14,038 Trailblazer
    edited August 17

    If you remember the date the USB Display port was still working simply restore to a system restore point before that date. Type restore in the Windows Search bar and click on "Create a restore point" then click on System Restore with a date:

    Note that if System Protection is disabled (Windows default 😑) you won't have restore points.

  • PAPKY
    PAPKY Member Posts: 6

    Tinkerer

    It was a perfect solution. All the problems were solved cleanly. Thank you!!!!

  • hackathlete
    hackathlete Member Posts: 4 New User

    The USB-C ports of this laptop are really bad. Often the charging does not work anymore (I have a workaround for this).

    In addition, right now I have the issue, that an external HD is not working with this laptop. Though, the HD works with another laptop.

    I have such issues quite regularly and I do not want to open my laptop each time.😓