Orion 3000 what CPU-s are supported by my motherboard Predator PO3-650

2

Answers

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Also I am a bit confused here I see that my mobo is Predator PO3-650 and down below I see Intel B760 …

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon
    edited December 2023

    With that model number I found THIS. Below is a picture of the relevant part. Unless this is you, someone else has the same RAM. It's DDR5-4800 but the frequencey is reported as ~4400 (2x2194.6).

    Looks like your PC is using "Jedec 6" settings (2x2200) and not "Jedec 7" (2x2400) that the RAM can actually do. In other word, the RAM is running at fail-safe speeds.

    Check if your BIOS has an XMP option for the RAM. I doubt that there is. Check also that you have the latest BIOS installed. Maybe the newest one will allow you to enable XMP and thus run your RAM at full speed?

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Yeah I will try with updating my Bios because right now I don’t have XMP..

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Actually I cant even update it, I don't know how I saw that I need USB drive, but I think that I can't do it

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    Have you checked the BIOS version you have now? Looks like there is only one on Acer's site and it's

    "BIOS New RC and MRC version update. Acer 2023/05/12 R01-A1"

    From your 1st post I can see that you supposedly have R01-A1 but the date is almost year earlier 1/5/2023. So, maybe the update was so minior that Acer didn't give it another version number? Something like R01-A2.

    On Nov 30 "StevenGen" made a long post about BIOS and RAM. Maybe the new BIOS will fix this problem for you, and might even allow you to run even faster RAM than DDR5-4800. I think 5200 or even 5600 might be doable.

    Let's hope someone more versed with this particular model comes along and offers a helping hand.

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Hey yeah thank you for the comment and yes my bios version is R01-A1 and I can’t find newer than that

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    So at the end, the only thing that I can put into that mobo is i7 13700F..?

  • billsey
    billsey ACE Posts: 34,246 Trailblazer

    The PO3-650 models support Intel Raptor Lake-S processors. They ship with these:

    I would expect the i9-13900F would work also, but the model is new enough that I don't of anyone who has tried one. They are all at 65W TDP.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Ohh man if I can go with i9 13900F I will be really happy with it and not changing mobo, if you have any information about it please let me know!

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    I don’t really know if that means something maybe it’s funny I don’t know really but they look exactly the same

  • billsey
    billsey ACE Posts: 34,246 Trailblazer

    Yes, the sockets are the same as with the other flavors…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    So can u give me any idea what can I do?

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    Again, I don't think swapping your CPU will make any noticable difference. Before doing or byuing anything, watch the following video few times. He explains Tarkov related bottlenecks and what can cause them. Pay attentions to the section about RAM. Maybe your game stutters because RAM is running out?

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    yeah it can be the RAM too because a lot of people are saying that u need at least 32GB and I am with 16

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    Well, watch the video and find out? He shows how you can check this, and it is pretty easy to see if the amount of RAM is the problem.

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Hey yeah so I saw the video and it is definitely ram that I need more, but I don’t know what ram should I get, 4400mhz or 4800mhz? Because some people are saying that it is 4800mhz ur on my pc it shows that it is 4400mhz..

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    I think, and as it is shown on previous page's list of compatible modules, you need DDR5-4800. I don't know why it runs at slower speed, but… it just does. It could be that you could install even faster RAM, but your PC would only use it at 4400.

    Having said that, have you seen this post? Someone on this forum wanted to update his PO3-650 to 32Gb. Pay attention to the 2nd last post as he gives the model numer that worked for him: KCP548US6K2 - 16.

    He kept using his original RAM, added 2x8Gb sticks from Amazon and now has 32Gb working. Yay!

    You could try to find other working memory from the next site. Their benchmarks are not to be trusted, but at least it lists the components people had when running them. Most of them have only 2x8Gb, but at least one had 32Gb when I looked.

    https://www.userbenchmark.com/System/Acer-Predator-PO3-650/304530

    Good luck! And please come back and report whether you succeeded or not! At least I'm interested to know if this upgrade made a big difference in Tarkov.

  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    Hello again everyone, it’s been a long time no see. So I bought 16gb more ram on 4800mhz but now it is working only on 2000 and I don’t have XMP in my bios …. Any suggestions how can I make it?

  • billsey
    billsey ACE Posts: 34,246 Trailblazer

    If you are running the latest BIOS version it should have XMP as an option, but only if all memory is XMP type. If you still have the original memory installed XMP won't be able to be turned on.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • INCERA
    INCERA Member Posts: 32 Troubleshooter

    The new ram that I bought it says that support XMP, so probably I have to buy another 16gb from them, let me ask if I buy another 16 from them should I go in bios again to make them 4800 or it will be as default?