Undervolt GPU and CPU(predator helios 300 G3-571

24

Answers

  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    not the roleback but the undervolt
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    Probably might had messed up something i never had issues with TS would recommend you to backup everything u need and go back to stock windows acer factory ALT+F10 on boot


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @xapim i just recently installed a new 1tb ssd should i back that up to? all it has is my game files which i think i can just redownload once a fresh wipe is installed Im just hoping if i decide to fresh wipe that it all works again but i think either my nvidia drivers broke it or windows
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @xapim also if i factory reset and the problem was the windows update wouldnt it not change anything since im only resetting all the settings and not the update
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited July 2019
    @xapim also if i factory reset and the problem was the windows update wouldnt it not change anything since im only resetting all the settings and not the update
    If you reset to acer factory (fresh install not keeping your files) it will delete everything and go back to the same windows version you had when you got it the first time as i said backup everything u need first


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    Ok Im going to try to rollback my nvidia drivers first and then try to rollback windows if it doesnt work then i will fully reset to a clean install of windows and let you know how this goes currently im in the middle of doing something but when i get the chance i will
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    Im going to create a restore point and update to windows 1903
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    xapim said:
    @xapim also if i factory reset and the problem was the windows update wouldnt it not change anything since im only resetting all the settings and not the update
    If you reset to acer factory (fresh install not keeping your files) it will delete everything and go back to the same windows version you had when you got it the first time as i said backup everything u need first
    Ok Im going to do that and back up everything whats the keys again?
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @xapim im resetting the pc now hopefully it works and nothing corrupts because it kept giving me the “Could not reset this pc” No changes were made thing
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    xapim said:
    @xapim also if i factory reset and the problem was the windows update wouldnt it not change anything since im only resetting all the settings and not the update
    If you reset to acer factory (fresh install not keeping your files) it will delete everything and go back to the same windows version you had when you got it the first time as i said backup everything u need first
    i factory reset and it reinstalled windows and everything i will check msi afterburner after i get most of this setup
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    xapim said:
    @xapim also if i factory reset and the problem was the windows update wouldnt it not change anything since im only resetting all the settings and not the update
    If you reset to acer factory (fresh install not keeping your files) it will delete everything and go back to the same windows version you had when you got it the first time as i said backup everything u need first
    i factory reset and downloaded your gpu driver version but no luck still doesnt show the gpu running unless im using a application thats running the gpu so basically the gpu is asleep unless i connect it to my monitor so the monitor uses my gpu or unless i run a gpu application that makes it show
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    but at least it doesnt show connection to gpu1 lost it just shows 0 degrees 
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @xapim also im guessing you have something always running on the gpu when using msi afterburner because if my gpu isnt running anything and is idle the usage and temps wont show up on msi but im going to use throttlestop and try to undervolt real quick
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited July 2019
    @xapim also im guessing you have something always running on the gpu when using msi afterburner because if my gpu isnt running anything and is idle the usage and temps wont show up on msi but im going to use throttlestop and try to undervolt real quick
    It will always show the temps either idle or not my gpu its on 40/43 when idle and the lowest 35/37


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    xapim said:
    @xapim also im guessing you have something always running on the gpu when using msi afterburner because if my gpu isnt running anything and is idle the usage and temps wont show up on msi but im going to use throttlestop and try to undervolt real quick
    It will always show the temps either idle or not my gpu its on 40/43 when idle and the lowest 35/37
    the thing is though i cant see my gpu temps without having something running for the gpu to be active do you know anyway to fix this? my gpu always shows idle unless running a program that uses the gpu and also for one of the pictures you posted i copied your throttlestop settings set the voltages to -80.1v for cpu core and cache and set -60.5v for the intel gpu but why for FID it only shows you have 4 instead of 8?
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @xapim like for the FID mine shows all my threads im guessing thats what they are. 
  • sri369
    sri369 ACE Posts: 2,818 Pathfinder
    the thing is though i cant see my gpu temps without having something running for the gpu to be active do you know anyway to fix this? my gpu always shows idle unless running a program that uses the gpu and also for one of the pictures you posted i copied your throttlestop settings set the voltages to -80.1v for cpu core and cache and set -60.5v for the intel gpu but why for FID it only shows you have 4 instead of 8?
    GPU is used only when there is a program using the GPU, or you are connected to an external monitor using the HDMI port - so this is normal to see GPU idle when it is not being used.

    Also, TS applies only to CPU (undervoltage to IGPU too). Predator Sense shows DGPU (dedicated GPU). The changes you make in TS do not effect the DGPU.
    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @sri369 i have a gtx 1060 and since i have a gpu program running so the msi after program will show the temps im going to undervolt my gpu while the program is running so i know that it is working i watched hotel heros video on the undervolting gpu and what do you think is the best profile for me if i wanna reduce cpu and gpu temps to the lowest possible? the profiles are "Max Q" "Stock Performance" and "OverClock/Undervolt"

  • sri369
    sri369 ACE Posts: 2,818 Pathfinder
    @sri369 the profiles are "Max Q" "Stock Performance" and "OverClock/Undervolt"
    I am sorry, but I cannot answer that. I did not follow any of those profile guides. I tamed the GPU frequency/voltage graphs to the optimal levels on my system.

    Also, personally, I do not believe in peak performance all the time. I prefer a system that is silent using minimal resources when idle, ramp up as needed, and go to peak when needed and then ramp down once the need is over.







    And most importantly... a custom power plan created out of *balanced* and customized.




    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
  • CaptainTwinkie
    CaptainTwinkie Member Posts: 48 Troubleshooter
    @sri369 well i just undervolted by -0.80v on cpu and cache and -0.60v intel gpu played overwatch for about 10-15 minutes and temps spiked up to 93 with cpu undervolt and i dont know if the gpu undervolt is working