carlos8

Tinkerer

Comments

  • Hi, Laurent, The fan's are working perfect. But i have aquestion, I want to install a 60mm fan in the outside upper back panel pulling the hot air out of the case, but i'm out of fan headers. Can i use a fan splitter on the system header? This header put the fan at high speed and is powering my heatsink fan. The other…
  • Pathfinder, The factory model is AVC DL08025R12U Which is 12v 0.5 amp 4500rpm. The replacement is the AVC DS08025R12U 12v 0.7 amp, Same frame 4400 rpm but 64 CFM a little more than the original. The 0.2 amp difference can affect the system in any way? I can always buy the original one if you recommend, isn't to expensive…
  • Well, now I'm almost sure its the motherboard. No mater what combination of RAM, the machine only boot in the two first slots (one blue and one black). It's worth to replace the MB?
  • Yes, Before the HDD installation the four sticks were working 8GB installed 7736 available. No i have the 2 factory ones were they come (black slots) and the new ones in the blue slots 4 x 2GB RAMs. No i don't know how to do that. But the sticks not working is one from factory and other new. As now the PC is working with…
  •  Aspire X1470-UR30P 4GB from factory, Mod. To 8GB num. PC3-1600(DDR3-1333) 240 pins DIMM DDR3 SDRAM UPC.609713577085 1 TB WD HDD
  • Well, After the restore the machine was like freshly windows installed. Therfore the HD6450 video card had not driver. Installed the driver and problem solved.
  • Well, the machine is working now. After the last step she beep, slowly start to arm the parts untill the sticks, only two are working. What can be the reason for two not to work? The stick itself or the slot on the MB. Thanks Carlos
  • Still wont boot or beep. What do you think? Carlos
  • Well if the WD10EZEX fit i think i'm going with it. But there's any harm in check other ones. My S/N: PTSHFP2001 Any especial detail if order the WD10EZEX Thanks
  • A friend of mine told me the WD10EZEX 1TB will work, but i not found any concrete answer.
  • Also run SFC/scannow and: Windows resource protection found corrupt files but was unable to fix some of them.
  • IronFly, Maybe you can answer a different doubt without open a new thread. I installed 2 x 2GB modules extra to boost my memory to 8GB, The BIOS says 8192 memory but in Computer System says 8GB memory 5.46 usable. Is this a problem with the memory or i have to make changes in the windows set up. I was reading in Tom's…
  • Solved!! Checking on Google, find a similar thread to mine and the solution was, shutdown the machine install the VGA cable in the new video card and boot the machine. The system recognize it automaticlly, allways you have installed the card software before.
  • If i disable the intergrated VGA and the other won't work. How can i enable the integrated VGA?
  • IronFly, Today received my VGA cable installed the video card again and select disable AMD and enable Power PCIE devices on the upgraded BIOS. I can't disable integrated graphic control with the new BIOS either. Try to change settings on Video card name but don't let me. Installed the VGA cable on the card and monitor to…
  • I've tryed to enter the DOS mode in every way i find on google without succes, any advice or details on how to? Thanks
  • Yes, The HDMI cable is connected to the integrated VGA. The HDMI dosn't work in the PCIE VGA. And NO my BIOS don't have disable Integrated graphic control. My BIOS Type is: P01-A0 How i upgrade my BIOS? Sorry for to many questions, i understand the tech. but i'm not an expert.
  • The system recognize the HD6450 AMD RADEON VGA card and downloaded and installed the software succesfully, But when i go to check in VGA External display still running the HD6410 integrated card. This maybe cause i just trying the HDMI cable on the New VGA card? I'm waiting for the VGA cable on the mail. i will check the…
  • Reset the CMO and load the default BIOS set up. Installed again the VGA card. Disabled the AMD-G on chipset controll. But i can't disable the Integrate gaphric control on Peripheral systems ( It's always in black instead of blue). Turn ON PCIE Control
Avatar