Rade97 Devotee

Hai @Miggy01 Try with the basic steps of power drain and bios default by the following steps. Power drain: Unplug the charger cable from laptop. On back of laptop there will be a pinhole. Insert paper clip into the pinhole and press and hold for 30 seconds, then plugin the charger cable. Bios default: Keep on tapping F2…

Hai @LincolnCheng, At first do the power drain and bios default in computer with following steps. Power drain: Unplug the charger cable from laptop. On back of laptop there will be a pinhole. Insert paper clip into the pinhole and press and hold for 30 seconds, then plugin the charger cable. Bios default: Keep on tapping…

Hai @Samkk, Just try with basic troubleshooting like battery reset and bios default. Then check with the hardware please. Battery reset: Unplug the charger cable from laptop. On back of laptop there will be a pinhole. Insert paper clip into the pinhole and press and hold for 30 seconds, then plugin the charger cable. Bios…

Hai @nurulhdda, Hope you are checking for the legacy mode in the bios setup utility> boot options> Boot mode. Before doing it load default value in bios by hitting the F9 and then save it by hitting the F10. Then try to get to bios and try to check for the legacy in the boot mode by hitting the F5 or F6 key. Try it and let…

Hai @NkSingh and @System, Some of the computers the pin hole will be absent so instead of that you can press and hold the power button for 9 seconds or 30 seconds so the battery reset will be done. Try it and then check with computer please. Good luck. 

Hai @JobitJoseph, You can check the snid on the backside of the computer. A label will be available with the information where snid just contains numbers only. Or otherwise you can confirm the serial number in command prompt with the command <wmic bios get serialnumber>. Hope you will find this helpful.

Hai @Zombigent You will be having altgr key which is found on the right side to the space bar. Use that key along with F10. Turn on the computer press and hold altgr and keep it on tapping the F10 key along with it Or otherwise do the multiple shutdown in you computer By turning on the computer and once you see the acer…

Hai @BlueBull It maybe the reason your bios has not been updated. You can update the bios screen and then you may see the tab for advanced. Follow the below instructions for the update of bios.Click Start. Enter "information" into the search box. Click "System Information." Wait for the data to populate and then click…

Hai @AIDR In first place check the operating system compatibility of your computer in acer support website(https://www.acer.com/ac/en/US/content/support) by giving your computer SNID numbed. If the computer seems to be compatible with the windows 10 means just install the operating by getting an installation disc. You can…

Hai @Betim If the computer is connecting with the internet and the speed is slow then its not the problem with the computer. Maybe there is a problem with internet connection. You can contact with your Internet service provider to get information. You can uninstall and reinstall the drivers for the internet from…

Hai @Vinay987 You can go to the msconfig again and enable the dolby audio services again. If it persists more follow the below steps. Right-click the audio icon on the task bar and click "Playback Devices." Double-click the default device and go to the "Enhancements" tab. Place a check by "Loudness Equalization" and then…

Hai @Callahan You can try with powerdrain and bios default in your computer For doing a power drain, follow the below steps: * Turn off the computer * Unplug all the cables from the Laptop * Take out the Laptop battery * Press and hold the power button for 20 seconds and then release it to drain the flea power (static…

Hai @PaladinKing888 Yes this is the feature in the windows10. You can find this in the settings and can change it as follows. To enable or disable this feature on Windows 10, open the Settings app, select “System,” and select “Display.” Turn the “Change brightness automatically when lighting changes” option on or off.…

Hai @Mohamed13Ashraf The battery usage depends on the hours of usage of computer and number of applications running in your computer. Although you can change some settings to avoid over drain of battery as follows. 1.Dim your screen brightness, the screen is the one of the most hungry part of the laptop. 2.Change the power…

Hai @ChevyCam94 Kindly do the power drain and bios default at first place in your computer. If need instructions in doing it, let me know. Click like if seems to be helpful

Hai @Essa If you have done the power drain and bios default correctly you can get the computer working fine.(For instructions needed for doing power drain and bios default give a comment) If not just try performing a system restore to roll back the computer to the time when your computer got dried out of battery. Click…

Hai @"FurkanKoçerX" Just check for the harddrive in the bios screen if its detecting or not. If it is not detecting then you can go with the further. Click like if useful.

@BittuGupta Then you have to get the recovery flashdrive from acer store and install the operating system externally.....

Hai @BittuGupta, This is a boot issue... Steps you can go with are 1. Power drain 2. Bios default 3. Try to go in to the safe mode 4. Try to do system restore 5. Try to enter the internal recovery to do reset and refresh 6. And the last one is you can use a recovery flash drive or disc to install the os Click accept and…

Hai @MoonwalkerLuke An error 43 usually points to a driver issue it’s a general fault code saying the device didn’t initialize correctly. You can try a few things to fix this the first would be rollback the driver to an earlier version or try removing the driver then reboot the machine and see if windows will install a new…