How can I reset my Acer Connect Vero W6m router?
Your Acer Connect Vero W6m router can be reset in two ways.
1) How to reset the Acer Connect Vero W6m router with the Reset button
- Make sure your Acer Connect Vero W6m router is connected to power and the blue LED on the top is on. See the image below for reference.
- Locate the RESET hole on the right side of your Acer Connect Vero W6m router. See image below for reference.
- Take a bent open paperclip or another object with a pointy end that is small enough to fit in the RESET hole.
- Then stick the pointy end of the paperclip (or whatever object you are using) in the RESET hole.
- Now press and hold the tiny button inside the RESET hole until the blue LED on top of the router turns into a blinking white LED.
- Wait until the LED stops blinking and turns blue again. Your Acer Connect Vero W6m router has now been reset to the factory default settings.
2) How to reset the Acer Connect Vero W6m router via a System reset
- Connect a LAN cable to any of the LAN ports of the Acer Connect Vero W6m. See the image below for reference.
- Open an internet browser on your computer and type one of the following into the search bar of your browser:
- http://acerconnect.com
- 192.168.76.1
- Enter your password in the Enter password field.
- Click on Log in.
- Click on the System tab in the menu on the left.
- Then click on Restart & Reset default in the submenu.
- Go to Factory data reset.
- Click on the Reset button on the right.
Your Acer Connect Vero W6m will now reset to the factory default settings.
Note: When your Acer Connect Vero W6m router has been reset, you can log in with the default password again.
