Can I mount my Predator Connect W6 on a wall?
You can easily mount the Predator Connect W6 router on a wall or any other vertical surface, like the side of a cupboard or a closet. The Predator Connect W6 has 2 holes on the bottom, which allow you to hang it on any wall. Be sure to use proper hardware to hang the router on your wall.
If you want to mount your Predator Connect W6 on a wall, follow the instructions below.
How to mount the Predator Connect W6 on a wall
- Mark the holes on the wall where you want to mount your Predator Connect W6. As indicated in the image below, the holes are 10 cm or 4 inches apart.
Note: Double-check your measurements before drilling into your wall to avoid any installation issues.
- Drill the holes, put the plugs in the holes and screw in proper hardware. For information on what hardware to use for mounting your Predator Connect W6 on a wall, consult your local hardware store.
- Then take your Predator Connect W6, hold it up against the hardware, line out the hardware with the mounting holes on the back of your router and carefully move the router down a bit to slide it over the hardware.
- Once your Predator Connect W6 is mounted on the wall, direct the antennas in upward direction for optimal signal reception.