Boot Mode cannot be toggled acer Aspire 5 A515-54

2»

Answers

  • jeron
    jeron Member Posts: 21 Networker
    JackE said:
    Go back to the BIOS menu Advanced tab. Is there an option to change SATA mode to AHCI? If not, press Ctrl+S to see if a hidden option appears. Jack E/NJ
    It doesn't have one. Tried Ctrl + S but it didn't show hidden options
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Also check Main tab for SATA mode option. Jack E/NJ

    Jack E/NJ

  • jeron
    jeron Member Posts: 21 Networker
    jeron said:
    JackE said:
    Go back to the BIOS menu Advanced tab. Is there an option to change SATA mode to AHCI? If not, press Ctrl+S to see if a hidden option appears. Jack E/NJ


     It doesn't have one. Tried Ctrl + S but it didn't show hidden options
    Advance Tab
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Also check Main tab for SATA mode option. Jack E/NJ

    Jack E/NJ

  • jeron
    jeron Member Posts: 21 Networker
    It has one see attached photo. The choices are  AHCI and RST with Optane 
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Try changing to and saving AHCI setting. Laptop may not boot anymore. But see if F12 boot option to USB WinPro installation stick now sees the SSD. Jack E/NJ

    Jack E/NJ

  • jeron
    jeron Member Posts: 21 Networker
    Yes I changed it and it showed the USB WinPro Bootable Device.
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Yes, but is WinPro installing on the SSD in AHCI mode? Jack E/NJ

    Jack E/NJ

  • jeron
    jeron Member Posts: 21 Networker
    JackE said:
    Yes, but is WinPro installing on the SSD in AHCI mode? Jack E/NJ
    It installed as I set it on AHCI mode not RST with optane. It also showed available drivers now for the part where you install the Windows 10 
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    OK. Let us know how it goes after the WinPro install is done. Jack E/NJ

    Jack E/NJ

  • jeron
    jeron Member Posts: 21 Networker
    JackE said:
    OK. Let us know how it goes after the WinPro install is done. Jack E/NJ
    Hi jack it worked with Windows 10 pro but new issues occur
    *Touch Pad not working
    *Internet Wireless Connect detection not working
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Answer ✓
    These are fairly common issues when switching from ACER WinHome version. If you can get online with wired ethernet to the router, download, install & run iobit's DriverBooster freeware to see if it will pick up any wifi & touchpad drivers that are better suited the the WinPro environment. Jack E/NJ

    Jack E/NJ

  • GeekyJoshy
    GeekyJoshy Member Posts: 4 New User
    Mi laptop doesn't even show the SATA mode Option, no mattter what i've tried
  • Gawain
    Gawain Member Posts: 373 Seasoned Practitioner WiFi Icon
    does your laptop have an NVMe drive?
  • jeron
    jeron Member Posts: 21 Networker
    jeron said:
    JackE said:
    OK. Let us know how it goes after the WinPro install is done. Jack E/NJ
    Hi jack it worked with Windows 10 pro but new issues occur
    *Touch Pad not working
    *Internet Wireless Connect detection not working

    JackE said:
    These are fairly common issues when switching from ACER WinHome version. If you can get online with wired ethernet to the router, download, install & run iobit's DriverBooster freeware to see if it will pick up any wifi & touchpad drivers that are better suited the the WinPro environment. Jack E/NJ
    Worked on it jack using a ethernet worked fine on my end thank you for the help :).
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    OK. Thanks for reporting back. Jack E/NJ

    Jack E/NJ