Acer Aspire M3970 LAN stopps working when PCI card is installed

Ultrasuperman
Ultrasuperman Member Posts: 53 Die Hard WiFi Icon
edited March 1 in 2020 Archives
So I've been using this PC for awhile as my media server and today I grabbed a PCI-e M.2 Adapter to swap my SATA SSD to the PCI to free up a SATA slot. When I have the PCI in the LAN stops working, the LAN lights up and blinks but Windows can't find the network, if I take the PCI card out then it finds the LAN just fine, anyone have any ideas what's going on?

Answers

  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    I wonder if the card is usurping the address block the Ethernet normally uses? If you bring up properties on the card there is usually a list of resources used.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Ultrasuperman
    Ultrasuperman Member Posts: 53 Die Hard WiFi Icon
    billsey said:
    I wonder if the card is usurping the address block the Ethernet normally uses? If you bring up properties on the card there is usually a list of resources used.
    What should I be looking for in properties?
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    A Resources tab...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Ultrasuperman
    Ultrasuperman Member Posts: 53 Die Hard WiFi Icon
    billsey said:
    A Resources tab...



    I've gone through just about everything and can't find any resource tab
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    That's the properties on the drive, not on the PCI card... The drive doesn't use any PCI addressing, but the card should. I'm guessing it's conflicting with the ethernet port's addresses.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Ultrasuperman
    Ultrasuperman Member Posts: 53 Die Hard WiFi Icon
    billsey said:
    That's the properties on the drive, not on the PCI card... The drive doesn't use any PCI addressing, but the card should. I'm guessing it's conflicting with the ethernet port's addresses.
    Ok so is there a way to fix the conflict?
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    It depends on the card design... Back in the day they had jumpers to do that, then it turned into software utilities, but I don't know if they're still doing that.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.