SSD As primary boot drive - nitro 5 AN515-43

Ayyyushhhhh
Ayyyushhhhh Member Posts: 18

Tinkerer

edited November 2023 in 2020 Archives
I successfully cloned my HDD to SSD using macrium software but when I enter the bios setup I found there is no boot prioity order. The only option I can find is windows boot manger. I have Acer nitro 5 AN515-43. Can someone explain to me how to make my SSD as primary boot drive?
«1

Answers

  • batmalin
    batmalin Member Posts: 4,231 Guru
    You don't see a second windows boot manager? If so then the clone was not successful.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    batmalin said:
    You don't see a second windows boot manager? If so then the clone was not successful.
    Can you tell me how to clone my SSD ..which software to use..I have kingston A200 250GB SSD

  • batmalin
    batmalin Member Posts: 4,231 Guru
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    batmalin said:
    But I think EaseUS support migration in pro version...Is any free alternative available

  • batmalin
    batmalin Member Posts: 4,231 Guru
    Nope, I have migrated mine with it.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    batmalin said:
    Nope, I have migrated mine with it.

    Ok, thanks...I will try and let you know...should I format the SSD?
  • batmalin
    batmalin Member Posts: 4,231 Guru
    I dont`t think it is required.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Gian_GOKU
    Gian_GOKU Member Posts: 43 Die Hard WiFi Icon
    edited October 2020
    I also used Macrium Reflect when cloning my HDD to my SSD and made my SSD as boot. 

    In the image below, the partitions boxed in red are the most important partions, specially 1 and 3. I'm not really sure if 2 is really needed. the partion labeld 5, it may be necessary since its the Recovery partition incase somethin goes wrong, you can use the recovery point instead of a fresh install.


    After the cloning process, in the BIOS priority order, there must be 2 of the same "windows boot manager" option. The bottom one would be the SSD.

    If there is still no 2nd option in the BIOS, I suggest cloning it again or a fresh install of windows on the SSD.

    If it's ok, I would suggest a fresh windows install instead on the SSD. Specially if you haven't reinstalled windows after buying the laptop. It will/may solve some probblems if there are any. 
  • Gian_GOKU
    Gian_GOKU Member Posts: 43 Die Hard WiFi Icon
    Also, if all the necessary partition doesn't fit on the SSD, you can manually shrink the cloned partition so it would fit.
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    Gian_GOKU said:
    I also used Macrium Reflect when cloning my HDD to my SSD and made my SSD as boot. 

    In the image below, the partitions boxed in red are the most important partions, specially 1 and 3. I'm not really sure if 2 is really needed. the partion labeld 5, it may be necessary since its the Recovery partition incase somethin goes wrong, you can use the recovery point instead of a fresh install.


    After the cloning process, in the BIOS priority order, there must be 2 of the same "windows boot manager" option. The bottom one would be the SSD.

    If there is still no 2nd option in the BIOS, I suggest cloning it again or a fresh install of windows on the SSD.

    If it's ok, I would suggest a fresh windows install instead on the SSD. Specially if you haven't reinstalled windows after buying the laptop. It will/may solve some probblems if there are any. 

    Oh, I See, I unchecked the other drives because it was showing unsufficient space..even though ssd had the space.
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    Gian_GOKU said:
    I also used Macrium Reflect when cloning my HDD to my SSD and made my SSD as boot. 

    In the image below, the partitions boxed in red are the most important partions, specially 1 and 3. I'm not really sure if 2 is really needed. the partion labeld 5, it may be necessary since its the Recovery partition incase somethin goes wrong, you can use the recovery point instead of a fresh install.


    After the cloning process, in the BIOS priority order, there must be 2 of the same "windows boot manager" option. The bottom one would be the SSD.

    If there is still no 2nd option in the BIOS, I suggest cloning it again or a fresh install of windows on the SSD.

    If it's ok, I would suggest a fresh windows install instead on the SSD. Specially if you haven't reinstalled windows after buying the laptop. It will/may solve some probblems if there are any. 

    Check this out
  • Gian_GOKU
    Gian_GOKU Member Posts: 43 Die Hard WiFi Icon
    Looking at the picture, for the recovery to fit, you need to have at least 1024 mb of space. It isn't necessary to clone the recovery but it is advisable. You can manually shrink the Partition 1-Acer (D:) on the SSD by clicking on it and pressing the "Cloned Partition Properties" Button below it, look at my last repsonse with the picture.
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    batmalin said:
    Nope, I have migrated mine with it.


  • batmalin
    batmalin Member Posts: 4,231 Guru
    Hum, about an year ago with the free version I was able to clone it... 
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Gian_GOKU
    Gian_GOKU Member Posts: 43 Die Hard WiFi Icon
    I've tested various cloning softwares, so far Macrium Reflect has the best and advanced features, specially, for free,
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    Gian_GOKU said:
    I've tested various cloning softwares, so far Macrium Reflect has the best and advanced features, specially, for free,

    Now I'm Struck in this situation. How to handle this?

  • Gian_GOKU
    Gian_GOKU Member Posts: 43 Die Hard WiFi Icon
    Gian_GOKU said:
    I've tested various cloning softwares, so far Macrium Reflect has the best and advanced features, specially, for free,

    Now I'm Struck in this situation. How to handle this?

    Haven't gotten that pop out before. Don't know why you have that. 
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    Gian_GOKU said:
    Gian_GOKU said:
    I've tested various cloning softwares, so far Macrium Reflect has the best and advanced features, specially, for free,

    Now I'm Struck in this situation. How to handle this?

    Haven't gotten that pop out before. Don't know why you have that. 

    maybe My SSD got corrupt , because during the cloning process I forgot to plug in the charger, and when I checked back ..0% charge.
  • Ayyyushhhhh
    Ayyyushhhhh Member Posts: 18

    Tinkerer

    Gian_GOKU said:
    Gian_GOKU said:
    I've tested various cloning softwares, so far Macrium Reflect has the best and advanced features, specially, for free,

    Now I'm Struck in this situation. How to handle this?

    Haven't gotten that pop out before. Don't know why you have that. 

    Thank you, guys...I succesfully cloned the ssd ..but there is still a problem..there is two windows boot manager...I reordered them..but still SSD is not considered as primary drive by PC...then i turned off the HDD..then restart the pc..i found..SSD is now booted...how to make ssd as primary drive now?