ACER Extensa 2540 - Memory upgrade

pauls9999
pauls9999 Member Posts: 6

Tinkerer

Hi,

I recently decided to upgrade the memory in my ACER Extensa 2540 - the existing memory had developed a fault that causes the machine to blue screen. It is out of warranty so thought I might as well take the opportunity to upgrade to 16 GB at the same time.

I purchase 2 memory cards - 8GB each (one to replace the existing one and one for the new slot).

When I tried to insert both cards I found I can't? The second slot has no metal clips on it to capture the memory card... is that normal?

The other memory card works well... but I want to understand if I am missing something or should there be only one working slot?

Best Answer

  • pauls9999
    pauls9999 Member Posts: 6

    Tinkerer

    Answer ✓
    Ok... I managed to get it last... it was much harder to install than the other socket. Thanks for the help!

Answers

  • aphanic
    aphanic Member Posts: 959 Seasoned Specialist WiFi Icon
    I was wondering why a thread about memory upgrade had so many views and 0 answers, now I understand.

    It is unusual I'll tell you that, I haven't encountered sockets with missing clips for now, would it be possible for you to take a picture and post it here? Depending on how the laptop is assembled you could dispense of the clips if you find a way to keep the card down. For example, if the RAM compartment of that machine is just a door away so to speak you could try to use that part of the body to keep the stick down.

    Maybe even use some tack attached to the motherboard (after all, it's not conductive and not permanent) and then the RAM chip would stick to it as well, hopefully keeping it down; but it's odd to have a proper socket in which to plug a stick and no retaining clips.
  • pauls9999
    pauls9999 Member Posts: 6

    Tinkerer

    Cheers! I will post a picture later... at work at the mo so don't want to remove the back of my laptop right now.

    I must admit it confused me... I wondered if I could just use a 16 GB memory card in the one slot I had and return the 2 cards.


  • pauls9999
    pauls9999 Member Posts: 6

    Tinkerer

    As you can see there is no equivalent metal clips to catch the other memory card... is that odd?
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    It looks like there are clips on both sockets, it's just that they look different since one card is installed right side up and the other upside down.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • pauls9999
    pauls9999 Member Posts: 6

    Tinkerer

    Ok.. actually I see what you mean... but it doesn't recognise the memory in that socket.
  • pauls9999
    pauls9999 Member Posts: 6

    Tinkerer

    And should one of the slots be upside down? It make it tricky to install the memory correctly anyway?
  • pauls9999
    pauls9999 Member Posts: 6

    Tinkerer

    Answer ✓
    Ok... I managed to get it last... it was much harder to install than the other socket. Thanks for the help!
  • RiotFreé
    RiotFreé Member Posts: 2 New User
    I have acer aspire E1 510 where can i find the clips
  • RiotFreé
    RiotFreé Member Posts: 2 New User
      help why there is no clip and where can i find it
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    @RiotFreé your model doesn't have a second socket, you can only replace that 2GB with a larger one, like a 8GB PC3L-12800S.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.