How to turn of RST(Rapid Storage Technology) in Nitro 5 AN515-54?

Kartik2K20
Kartik2K20 Member Posts: 22 Networker
edited December 2023 in 2020 Archives
During Installation of Ubuntu I keep getting this error saying 'Turn of RST before installation'. I didn't install any RST module nor it is turned on in RST setting. I didn't find any setting in BIOS as well. Any suggestions??

Best Answers

  • batmalin
    batmalin Member Posts: 4,223 Guru
    edited July 2020 Answer ✓
    Hi, Set the Win to boot in safe mode, restart and go to BIOS then on the main tab press ctrl+s and Sata operation mode will apear - change it from RST to AHCI, save and exit. Win will start in safe mode and will install the drivers needed. After that you will be able to keep your Win and to install Linux.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • batmalin
    batmalin Member Posts: 4,223 Guru
    Answer ✓
    Did you set the next boot to be in safe mode before changeing to AHCI?
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

Answers

  • Kartik2K20
    Kartik2K20 Member Posts: 22 Networker


        


  • batmalin
    batmalin Member Posts: 4,223 Guru
    edited July 2020 Answer ✓
    Hi, Set the Win to boot in safe mode, restart and go to BIOS then on the main tab press ctrl+s and Sata operation mode will apear - change it from RST to AHCI, save and exit. Win will start in safe mode and will install the drivers needed. After that you will be able to keep your Win and to install Linux.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Kartik2K20
    Kartik2K20 Member Posts: 22 Networker
    I'm facing BSOD any solution?
  • batmalin
    batmalin Member Posts: 4,223 Guru
    Answer ✓
    Did you set the next boot to be in safe mode before changeing to AHCI?
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Kartik2K20
    Kartik2K20 Member Posts: 22 Networker
    edited July 2020
    I did change the boot mode in 'msconfig' then it restarted correctly into windows with AHCI mode. 
  • Kartik2K20
    Kartik2K20 Member Posts: 22 Networker
    edited July 2020
                      
  • batmalin
    batmalin Member Posts: 4,223 Guru
    Are you in safe mode while taking the picture?
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • Kartik2K20
    Kartik2K20 Member Posts: 22 Networker
    Everything is working great thank you!
  • Kartik2K20
    Kartik2K20 Member Posts: 22 Networker
    One last question from my observation. My lap battery was 60% just 10 min ago after this process done it's now 30%.  Is it normal that battery get reduced after changing??
  • batmalin
    batmalin Member Posts: 4,223 Guru
    Every reboot drains the battery, so nothing to worry
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

Categories