Resetting Windows 10 and reinstalling Predator Sense

FrankBaby
FrankBaby Member Posts: 13

Tinkerer

I want to reset Windows 10 for my Orion 3000. But I found two issues. If you could give me some advice, that would be great.

(1) I have created a "Windows 10 Recovery USB Disk" from Acer Care Centre. This recovery USB disk is created successfully and bootable. In the first reboot (via the USB disk), I chose recovery from this USB disk. But in the second reboot, the PC ignored the USB disk and changed to boot from my hard disk (i.e. the SSD of Orion). Finally, I gave up recovering from the USB disk. I can only recover my system through the following steps.

1. Press & Hold down the ALT Key
2. While holding the ALT, press Power button then as quickly as possible tap on the F10 multiple/repeatedly times until an Acer Blue boot screen appears
3. Select "Troubleshooting"
4. Select "Reset this PC"
5. Select "Remove all personal files and data"
6. Select "Remove files and clean the drive fully"
7. Select "Reset"

This method indeed can reset Windows 10. But the new Windows is actually NOT the original Acer factory default. For example, if you have installed some Windows language packs before, you can see the new Windows still keeps some language settings made before. I want to know how to TRULY reset Windows 10 to the Acer factory default state using the recovery USB disk.

(2) After doing the seven steps above, I can get a new Windows 10 (although not the Acer factory default). However, Predator Sense disappears! It is installed in the folder (C:\Program Files\Acer\PredatorSense Service), but there is no way to lunch it. Many people have discussed this issue (https://community.acer.com/en/discussion/544494/predator-sense-is-not-working-acer-predator-ph315-51-574a). And their solution is to execute/reinstall a file in the bundle of Predator Sense. This method works on my system. However, reinstalling Predator Sense "every time when I want to launch it" is really strange and tiring! Do you have better ways to launch Predator Sense?

Thanks.

Answers

  • GAMING6698
    GAMING6698 ACE Posts: 7,995 Pathfinder
    @FrankBaby
    So you are using new window!
    Open control panel then uninstall predatorsense Service after uninstalling follow these steps↓

    1)open cmd as administrator and type command -
                            lodctr /R
    (R must be in capital letters exact how i written)
    2)after typing this command press enter then close CMD and download,install latest predatorsense application from acer driver site for your system
    (Try command 2-3times if doesn't working or showing error)
    windows 10/11 optimization guide for gaming 
    Windows 10/11 optimization guide for gaming — Acer Community

    My AN515-43 laptop UserBenchmark-
    https://www.userbenchmark.com/UserRun/51514566
  • FrankBaby
    FrankBaby Member Posts: 13

    Tinkerer

    @GAMING6698
     Your solution works for me. Now my Predator Sense can launch successfully. Thanks!
  • ansley
    ansley Member Posts: 50 Enthusiast WiFi Icon
    edited May 2021
    it sayes unable to rebuild performance counter setting error code 5 in the cmd what do I do

  • CaptADARSH
    CaptADARSH Member Posts: 1 New User
    Today i also reset my windows 10. In previous it used to show predator sense and would worked nicely but after reset its not getting launched even it is not showing in my start up menu . but i tried what given over here and launched from program files . still it is not working even if i run it as administrator
  • Voxx
    Voxx Member Posts: 1 New User
    Yes im facing the same issue as @CaptADARSH, someone please do give a fix, thank you!!
  • billsey
    billsey ACE Posts: 34,672 Trailblazer
    With a reset Windows doesn't reinstall it. Just download from the Acer support site and reinstall.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.