AN515-42, firmware 1.16, No Bootable Devices found trying to boot Linux drive

intok
intok Member Posts: 14

Tinkerer

edited December 2023 in 2020 Archives
I've tried disabling secure boot, I've been told that there is a way to show hidden options with ctrl+s in the UEFI but I've tried it on every page with no luck. The only boot option it shows is UEFI, there is no legacy option, under the SATA settings there is only enable and disable of the sata ports. I've also tried disabling TPM, still nothing. Yes, it sees the drive when it's connected in the UEFI, I can plug the drive into any of my other computers and boot from it just fine. No it's not a cable issue, it boots from the Windows 10 drive without issue.

The problem is that Windows10 is completely useless for me and what I do.

Answers

  • In the information tab, does it show that sata mode is in ahci? Have you already converted the pendrive to gpt?
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • intok
    intok Member Posts: 14

    Tinkerer

    No, there is no option for AHCI. I updated firmware from the base 1.11 that it shipped with one stage at a time through to 1.16, there was never an AHCI or legacy option. I'm trying to move an existing drive from another computer, it has all of the necessary drivers and will boot every other computer I have both AMD and Intel based as long as they are 64 bit.
  • andylb
    andylb ACE Posts: 3,827 Pathfinder
    intok said:
    No, there is no option for AHCI. I updated firmware from the base 1.11 that it shipped with one stage at a time through to 1.16, there was never an AHCI or legacy option. I'm trying to move an existing drive from another computer, it has all of the necessary drivers and will boot every other computer I have both AMD and Intel based as long as they are 64 bit.

    Incidentally you don’t update BIOS firmware one a time, ALL BIOS updates are contained in the most recent firmware update

    Please click YES if I answered your question

    I am not an ACER employee
    Thank you and have a blessed day  B)

    ★★ ACE Pathfinder 2019★★

  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,332 Trailblazer
    edited January 2020
    I would like to know, what is shown here:


    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :)