My NitroSense isn't working properly
GunRunner
Member Posts: 1 New User
Whenever I run a game on the GPU and I check NitroSense for the temp it says the GPU is idle, even though before with the same game it would tell me. I even checked if the application was running on the GPU and it was. Please I need to fix this I have a Nitro AN515-53
0
Answers
-
Hi GunRunner, Uninstall the Nitro sense and reinstall and see if that's work, kindly reply to this comments.2
-
GunRunner said:Whenever I run a game on the GPU and I check NitroSense for the temp it says the GPU is idle, even though before with the same game it would tell me. I even checked if the application was running on the GPU and it was. Please I need to fix this I have a Nitro AN515-53
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.
1 -
anuraagkhare2121 said:I had the same problem. Here's what got me solved:-
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.1 -
i have searched for the NitroSense software download and cannot find it in either support or products. can someone post a link to it. my NitroSense acts like its going to open but never does and my Nitro Laptop is getting hot due to the fan not speeding up when im gaming.0
-
anuraagkhare2121 said:I had the same problem. Here's what got me solved:-
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.0 -
thamahes2018 said:Hi GunRunner, Uninstall the Nitro sense and reinstall and see if that's work, kindly reply to this comments.0
-
anuraagkhare2121 said:I had the same problem. Here's what got me solved:-
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.anuraagkhare2121 said:I had the same problem. Here's what got me solved:-
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.anuraagkhare2121 said:I had the same problem. Here's what got me solved:-
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.
0 -
CMALazaga said:Hi please help my acer nitro 5 model version is an515-43 and i had a msi afterburner at first after that my nitrosense doesn't read my gpu usage and even when i tried opening games still doesn't work i tried the msi afterburner and i saw that my gpu is working fine but the in the nitrosense app it's not,i hope you can help me thanks
Please start a new topic of your own. One question per topic please, thankyouPlease click YES if I answered your question
I am not an ACER employeeThank you and have a blessed day★★ ACE Pathfinder 2019★★
0 -
anuraagkhare2121 said:I had the same problem. Here's what got me solved:-
1)Uninstalled both acer nitrosense app and acer nitro sense service
2)Reboot
3)Download latest Nitro sense drivers from support page
4)Run setup.exe first. It will install only acer nitrosense services.
5)go to the folder "v3.01.3000" found in the same drivers folder and first install all appx named ".NET native Framework" and "VCLibs" [both x64 and x86]
6)One or more apps will fail giving errors like "the resources which it modifies are currently in use". Ignore it.
7)Now install the last one 'APPXBUNDLE" type. [be sure to tick "launch when ready"]
Now NitroSense should open perfectly. If not try again after a reboot.0