ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor!

Where can I find this (In Windows OS, unzip the compressed Crisis utility package (i.e. in this case,xapim said:omarinag9 if for any reason your laptop is bricked the only way to get it back to work its following these steps:
(you will need to create the usb drive in another device)Crisis Utility SOPWhen to Use the Crisis S.O.P?• When the system hangs while updating BIOS.• When power failure occurs and the system shuts down while updating BIOS.• When the system cannot boot normally after updating BIOS (i.e. a black screen appearswithout a POST logo, etc).Creating a USB Flash Crisis DiskTo create a Crisis USB flash disk, perform the following:1. On a machine with Windows OS, plug in a USB flash disk.2. Launch Windows Explorer, the USB flash disk is shown as a “Removable Disk”. Right-click themouse on the USB flash disk, then select Format to format the USB disk.3. In the dialog shown below, set the following options:• File System: Select “FAT32”• Format Options: Select “Quick Format”In Windows OS, unzip the compressed Crisis utility package (i.e. in this case,“Crisis_Disk_v1.xx.zip”). Then copy the files “C5PRHx64.fd” to the root directory of the USBflash disk made in the preceeding steps.NOTE:Make sure the size of “C5PRHx64.fd“ is 8.97MB, and that there is no other *.fd file in the rootdirectory of the USB flash disk.
Then on AC insert the USB drive press/hold FN+ESC and power up wait 5/6 seconds untill you hear the fans at full speed and then release FN+ESC wait 3/5 mnts once the flsh its complete the laptop will automatically shutdownIf the waiting time takes more than 5 minutes, the system recovery might have failed. Check thefollowing:• BIOS filename (i.e. C5PRHx64.fd) is correct and in the root directory of the USB flashCrisis disk.• Remove the battery to reset the embedded controller status.
and repeat all steps again
Hardstaff here or even here are good videos on how to create the .fd file but do it at your own risk bare in mind you have to use the hex editor as the new bios files are all .bin in order to find the exact code to rename the file to the proper name.fd or else it will not flash this procedure its only advised to advanced users who know exactly what they are doing to avoid sending it to repairHardstaff said:Where can I find this (In Windows OS, unzip the compressed Crisis utility package (i.e. in this case,xapim said:omarinag9 if for any reason your laptop is bricked the only way to get it back to work its following these steps:
(you will need to create the usb drive in another device)Crisis Utility SOPWhen to Use the Crisis S.O.P?• When the system hangs while updating BIOS.• When power failure occurs and the system shuts down while updating BIOS.• When the system cannot boot normally after updating BIOS (i.e. a black screen appearswithout a POST logo, etc).Creating a USB Flash Crisis DiskTo create a Crisis USB flash disk, perform the following:1. On a machine with Windows OS, plug in a USB flash disk.2. Launch Windows Explorer, the USB flash disk is shown as a “Removable Disk”. Right-click themouse on the USB flash disk, then select Format to format the USB disk.3. In the dialog shown below, set the following options:• File System: Select “FAT32”• Format Options: Select “Quick Format”In Windows OS, unzip the compressed Crisis utility package (i.e. in this case,“Crisis_Disk_v1.xx.zip”). Then copy the files “C5PRHx64.fd” to the root directory of the USBflash disk made in the preceeding steps.NOTE:Make sure the size of “C5PRHx64.fd“ is 8.97MB, and that there is no other *.fd file in the rootdirectory of the USB flash disk.
Then on AC insert the USB drive press/hold FN+ESC and power up wait 5/6 seconds untill you hear the fans at full speed and then release FN+ESC wait 3/5 mnts once the flsh its complete the laptop will automatically shutdownIf the waiting time takes more than 5 minutes, the system recovery might have failed. Check thefollowing:• BIOS filename (i.e. C5PRHx64.fd) is correct and in the root directory of the USB flashCrisis disk.• Remove the battery to reset the embedded controller status.
and repeat all steps again“Crisis_Disk_v1.xx.zip”). I have looked everywhere and cannot seem to find it.