My Acer predator helios 300 gets a big FPS drop when connecting it to a monitor.

VisionS
VisionS Member Posts: 7 New User
edited October 2023 in 2020 Archives
When i plugg in my acer predator helios 300 into a 240hz monitor brand new thru hdmi 1 I get a high FPS drop. This happens in all of my games, even in CSGO. I've read different post on how to fix this issue but nothing works, the things i've tryed: 
- Enable geforce experimental features and restarting my pc twice
- Dont have the lid open while playing/having the lid mirroring/having it open but turnd off
- Playing on the same res on the monitor and the laptop
- Closing everything in the backround
And i think the computer should be able to run games without lag with a monitor on almoste everygame, because it was pretty expensive and its pretty high spec. And as soon i unplugg my monitor and only playing on the laptop screen the lag is gone, and when i plugg the monitor back in it starts lagging again.. 
Pleas help me :d 

btw, Sorry for bad spelling. Not good at Enlish -_-

Answers

  • MaClane
    MaClane ACE Posts: 35,598 Trailblazer
    Se minha resposta foi útil, deixe um Curtir, marque como Solucionado e clique em Promover!
    Caso contrario, fico a disposição para tentarmos sanar suas duvidas e resolver seus problemas!
    Atenciosamente:  J. MaClane™

    If my answer was helpful, leave a Like, flag as Fixed and click Promote!
    Otherwise, I am willing to try to heal your doubts and solve your problems!
    Sincerely, J. MaClane ™


    For users of the English, Spanish, French and German Community, I will be using Google Translate!
              
  • VisionS
    VisionS Member Posts: 7 New User
    edited April 2019
    MaClane said:

    Well i do have this monitor 
    ASUS XG27VQ

    27.0" 1920 × 1080 VA monitor (FreeSync over DP and HDMI)
    Maximum 144 Hz over HDMI
     -------------------------------------------------------
    ASUS XG258Q

    24.5" 1920 × 1080 TN monitor (FreeSync over DP and HDMI)
    Maximum 240 Hz over HDMI
    And it still lags. Any other solutions?

  • Could you tell the exact model of your notebook? Example an515-51-75kz!
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • VisionS
    VisionS Member Posts: 7 New User
    edited April 2019
    Could you tell the exact model of your notebook? Example an515-51-75kz!
    Could you tell the exact model of your notebook? Example an515-51-75kz!

    Yes, this is my system model! System Model NG-PH317-51-71K0

    And if you need anything else ill just post it right here:
    Processor Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz, 2808 Mhz, 4 Core(s), 8 Logical Processor(s)
    Version 10.0.17763 Build 17763
    OS Name Microsoft Windows 10 Home




  • JackE
    JackE ACE Posts: 45,079 Trailblazer
    Specs always seem hazy on if or when the HDMI port uses the integrated adapter or the discrete adapter. With few exceptions, the maximum refresh rate at most resolutions is listed as 60Hz. Thus I suspect that 60Hz is sort of a guaranteed minimum rate if or when the integrated adapter is used. Anything higher than 60Hz suggests that the discrete adapter is being used. What governs whether one or the other is used for HDMI output doesn't seem to be well documented. The fact that different monitors seem to get different results suggests a hardware handshake between the monitor and the laptop determines the adapter and thus the rate used. Jack E/NJ

    Jack E/NJ

  • VisionS
    VisionS Member Posts: 7 New User
    JackE said:
    Specs always seem hazy on if or when the HDMI port uses the integrated adapter or the discrete adapter. With few exceptions, the maximum refresh rate at most resolutions is listed as 60Hz. Thus I suspect that 60Hz is sort of a guaranteed minimum rate if or when the integrated adapter is used. Anything higher than 60Hz suggests that the discrete adapter is being used. What governs whether one or the other is used for HDMI output doesn't seem to be well documented. The fact that different monitors seem to get different results suggests a hardware handshake between the monitor and the laptop determines the adapter and thus the rate used. Jack E



    okay, so there is no other ways around this problem without buying a new computer?
  • JackE
    JackE ACE Posts: 45,079 Trailblazer
    I think as indicated in colleague MaClane's link,  https://community.acer.com/en/discussion/541521/helios-confirmed-240hz-hdmi/p1, the fact that some monitors do, and some monitors don't, seem to work at higher rates suggests the most practical solution might well be in using one of the compatible monitors that were found.  Jack E/NJ

    Jack E/NJ

  • VisionS
    VisionS Member Posts: 7 New User
    JackE said:
    I think as indicated in colleague MaClane's link,  https://community.acer.com/en/discussion/541521/helios-confirmed-240hz-hdmi/p1, the fact that some monitors do, and some monitors don't, seem to work at higher rates suggests the most practical solution might well be in using one of the compatible monitors that were found.  Jack E/NJ

    But i Do have one of the monitors on the loist and i run it with the native res 1920x1080
  • JackE
    JackE ACE Posts: 45,079 Trailblazer
    Which monitor? Jack E/NJ

    Jack E/NJ

  • R4ge
    R4ge Member Posts: 2 New User
    I am having the exact same problem with my Predator 300, i just bought a 144hz ViewSonic monitor (on the list of HDMI compatible monitors) and i keep getting large FPS drops which make games literally unplayable. I have tried every solution i could find and nothing has worked yet. Please help.
  • JackE
    JackE ACE Posts: 45,079 Trailblazer
    VisionS  et al  Before starting to game with the HDMi connection, is your battery nearly 100% charged, charger plugged in and Control Panel  power plan set to performance mode? Jack E/NJ

    Jack E/NJ

  • VisionS
    VisionS Member Posts: 7 New User
    JackE said:
    VisionS  et al  Before starting to game with the HDMi connection, is your battery nearly 100% charged, charger plugged in and Control Panel  power plan set to performance mode? Jack E/NJ
    Yes it is, the charger is in and the battery is set to High preformance
  • VisionS
    VisionS Member Posts: 7 New User
    JackE said:
    Which monitor? Jack E/NJ

    JackE said:
    Which monitor? Jack E/NJ
    This is my exakt monitor: ASUS XG258Q

    24.5" 1920 × 1080 TN monitor (FreeSync over DP and HDMI)
    Maximum 240 Hz over HDMI
  • JackE
    JackE ACE Posts: 45,079 Trailblazer
    edited April 2019
    Oh-oh. Our MonitorList ACE guru Red-Sand  claims >>>>The reason I compiled this list is because most monitors with a Display Port connection do not allow the HDMI to exceed 60hz. (If the monitor has both connections available). >>>> https://community.acer.com/en/discussion/comment/618961/#Comment_618961

    Another user Radford999 on that same link page who has a similar setup to you with the XG258Q claims >>>>i can change it to 120hz>>>

    I'm trying to get Red-Sand  to chime in on this thread here.

    Stay tuned.

    Jack E/NJ

    Jack E/NJ

  • Red-Sand
    Red-Sand ACE Posts: 1,892 Pathfinder
    Have you tried to change the display properties via Windows or Nvidia?

    Show me screen shots of the values you've set once connected to the monitor.

    For example on my LG gaming monitor I had to navigate here to get the HZ increase to show.


    - Hotel Hero
  • Card17250
    Card17250 Member Posts: 8

    Tinkerer

    Red-Sand said:
    Have you tried to change the display properties via Windows or Nvidia?

    Show me screen shots of the values you've set once connected to the monitor.

    For example on my LG gaming monitor I had to navigate here to get the HZ increase to show.


    Where do you find that on a monitor or laptop settings?
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    Card17250 nvcp will have extra display option when u connect an external display either via hdmi or DP


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/