No scrolling- no options to set trackpad

JIM44
JIM44 Member Posts: 2 New User
edited November 2023 in 2019 Archives
Hi I recently purchased the Aspire A315-41. I can't use the scrolling from the track pad. I'm running Win 10 as O/S.
I tried to install the ELANTECH driver from the Acer support site, but I can't install this. Any advice on being able to use the scrolling? Is it a driver problem at all?
Thank you!

Best Answer

  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    Answer ✓
    Shut machine completely off. Turn it back on and immediately start tapping the F2 key to enter the BIOS menu. Go to the Main tab and set touchpad to advanced mode. Press F10 to save settings and exit. Jack E/NJ


    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    Answer ✓
    Shut machine completely off. Turn it back on and immediately start tapping the F2 key to enter the BIOS menu. Go to the Main tab and set touchpad to advanced mode. Press F10 to save settings and exit. Jack E/NJ


    Jack E/NJ

  • JIM44
    JIM44 Member Posts: 2 New User
    Thank you JackE! All working perfectly. Thank you for fast and efficient reply! Good day.
  • BillyStubbsy
    BillyStubbsy Member Posts: 1 New User
    Hi Jack
    I've got a similar problem with my 5750Z touch pad, I can not get 2 finger scroll to work. 
    My machines Bios does not show the touch pad info... Have you any ideas for me please

    Note I have gone into finding the UEFI info through windows 10 recovery but again it is missing 

    Thanks
  • JackE
    JackE ACE Posts: 45,098 Trailblazer

    Press WIN+R. Enter msinfo32. Click 'Components' folder in left pane. Click 'Input' folder. Click 'pointing device'. Do you have a Synaptics or Elantech touchpad listed in the right pane? Jack E/NJ

    Jack E/NJ