Acer Aspire ES1-132 BIOS menu / Dual Boot Problem

The_LoudSpeaker
The_LoudSpeaker Member Posts: 11

Tinkerer

edited August 2023 in 2019 Archives
Hii..I have dual booted my Acer Aspire ES1-132 with Win10 and ubuntu 16.04. I cannot find an entry for ubuntu in BIOS. I have the following questions:
1> How do I add an entry for ubuntu in BIOS?
But It didn't work.
2> When will the legacy BIOS mode be available ? Is it planned in next update for BIOS software?
3> Any temporary workaround to get an OS booted in legacy mode?

Best Answers

  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    edited September 2018 Answer ✓
    grubx64.efi is most likely. How about EFI\linux instead of \ubuntu directory? Try bootx64.efi too for good measure. Jack E/NJ

    Jack E/NJ

  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    Answer ✓
    JackE said:
    grubx64.efi is most likely. How about EFI\linux instead of \ubuntu directory? Try bootx64.efi too for good measure. Jack E/NJ
    Thanks! It worked for me I copied contents of /EFI/ubnuntu to /EFI/Linux and then renamed the /EFI/Linux/grubx64.efi file to /EFI/LInux/bootx64.efi

    I guess that is mostly due to the Apollo Lake processor. Thanks again. I still have another part of my question un-answered : How do I boot an OS in legacy mode? I really want to use Linux lite. But it boots only in legacy mode.
«1

Answers

  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    If the ubuntu seemed to install OK, then re-enter the BIOS menu, main tab. Make sure the F12 boot menu is enabled. Jack E/NJ

    Jack E/NJ

  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    JackE said:
    If the ubuntu seemed to install OK, then re-enter the BIOS menu, main tab. Make sure the F12 boot menu is enabled. Jack E/NJ
    Hii I can't find the entry for ubuntu in f12 menu. I wanted to know how to add an entry for ubuntu manually in the boot options. Is there any way to do this using cmd in windows? using bcdedit possibly?
  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    Does your laptop have the optional 2.5" HDD? If not, what size is the eMMC? Jack E/NJ

    Jack E/NJ

  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    JackE said:
    Does your laptop have the optional 2.5" HDD? If not, what size is the eMMC? Jack E/NJ
    No it does't have an emmc or optional 2.5" HDD. It has 500GB Hard Disk installed that's it. but in bios options, it also has hd1 option but that's empty. Nothing there.
  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    OK. Your HDD should be just fine for this. Sounds like you might've used an older ubuntu install that can't accomodate your UEFI bootstrapper. If setting and saving a supervisor password doesn't reveal additional security options upon re-entering the UEFI menu with the password, I suggest trying one of the latest Mint ubuntu flavors. I'm using 18.3 now. 19 just came out. The 18.3 install did have some minor glitches on accomodating my UEFI grub entry but might not be a problem for your machine. Jack E/NJ 

    Jack E/NJ

  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    JackE said:
    OK. Your HDD should be just fine for this. Sounds like you might've used an older ubuntu install that can't accomodate your UEFI bootstrapper. If setting and saving a supervisor password doesn't reveal additional security options upon re-entering the UEFI menu with the password, I suggest trying one of the latest Mint ubuntu flavors. I'm using 18.3 now. 19 just came out. The 18.3 install did have some minor glitches on accomodating my UEFI grub entry but might not be a problem for your machine. Jack E/NJ 

    I want to install ubuntu 16.04LTS and not mint. Thanks tho


  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    Why can't you try the 18.04 install? What do the ubuntu forums recommend such as https://ubuntuforums.org/showthread.php?t=2359531  ?

    Jack E/NJ

    Jack E/NJ

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    edited September 2018
    @The_LoudSpeaker

    Use the link below to guide you (follow the 8 steps)..  Please note that you can't use emmcblk0p1 because you don't have an emmc drive.

    http://www.slabbe.org/blogue/2018/05/installing-ubuntu-18.04-on-aspire-es-11-es1-132-c6lg/

     Probably sda1 or sda2 ??   /dev/sda2     or    /dev/sda1

    You can also use the fdisk -l command to figure it out.
    I'm not an Acer employee.
  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    JackE said:
    Why can't you try the 18.04 install? What do the ubuntu forums recommend such as https://ubuntuforums.org/showthread.php?t=2359531  ?

    Jack E/NJ

    18.04 is too heavy for 2gigs of ram.. 16.04 is better.

  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    JordanB said:
    @The_LoudSpeaker

    Use the link below to guide you (follow the 8 steps)..  Please note that you can't use emmcblk0p1 because you don't have an emmc drive.

    http://www.slabbe.org/blogue/2018/05/installing-ubuntu-18.04-on-aspire-es-11-es1-132-c6lg/

     Probably sda1 or sda2 ??   /dev/sda2     or    /dev/sda1

    You can also use the fdisk -l command to figure it out.
    I saw that method but I don't have a boot folder under EFI in my ESF. :(
  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    >>>18.04 is too heavy for 2gigs of ram.. 16.04 is better.>>>

    It'll take an 8GB DDR3L 1.6GHz or greater sodimm. Less than $50 with free shipping. Jack E/NJ

    Jack E/NJ

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    edited September 2018
    If those instructions that I gave you don't work, then the only other things I can suggest is to.....

    A.  Read megaparsec's instructions in link below

    https://community.acer.com/en/discussion/534636/acer-spin-1-sp111-32n-cant-boot-any-linux-from-usb/p1

    https://community.acer.com/en/discussion/534636/acer-spin-1-sp111-32n-cant-boot-any-linux-from-usb

    or

    B.  Read sladek90 instructiions in link below

    https://askubuntu.com/questions/862946/unable-to-install-ubuntu-on-acer-aspire-es1-533

    or

    C.  Make sure you have created your Ubuntu USB media properly with rufus and the Ubuntu iso.

    rufus settings:  GPT, UEFI (non-CSM), FAT32

    https://rufus.akeo.ie/

    or

    D.  It's possible that Acer updated the BIOS on your computer model so it now contains "Select an uefi file as trusted" in the UEFI.  Check to see if it has this in your BIOS.

    If your BIOS settings has something that says 
     "Select an uefi file as trusted" in the UEFI...... then follow the @JackE instructions in this link.   If you can't disable secure boot in your BIOS, then just skip that step as it can probably/possibly be done without disabling secure boot.  Add grubx64.efi or BOOTX64.efi or shimx64.efi before you install Ubuntu. 


    I don't have an es1-132 and I'm all out of ideas.....good luck.




    I'm not an Acer employee.
  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    edited September 2018
    JordanB said:
    If those instructions that I gave you don't work, then the only other things I can suggest is to.....

    A.  Read megaparsec's instructions in link below

    https://community.acer.com/en/discussion/534636/acer-spin-1-sp111-32n-cant-boot-any-linux-from-usb/p1

    https://community.acer.com/en/discussion/534636/acer-spin-1-sp111-32n-cant-boot-any-linux-from-usb

    or

    B.  Read sladek90 instructiions in link below

    https://askubuntu.com/questions/862946/unable-to-install-ubuntu-on-acer-aspire-es1-533

    or

    C.  Make sure you have created your Ubuntu USB media properly with rufus and the Ubuntu iso.

    rufus settings:  GPT, UEFI (non-CSM), FAT32

    https://rufus.akeo.ie/

    or

    D.  It's possible that Acer updated the BIOS on your computer model so it now contains "Select an uefi file as trusted" in the UEFI.  Check to see if it has this in your BIOS.

    If your BIOS settings has something that says 
     "Select an uefi file as trusted" in the UEFI...... then follow the @JackE instructions in this link.   If you can't disable secure boot in your BIOS, then just skip that step as it can probably/possibly be done without disabling secure boot.  Add grubx64.efi or BOOTX64.efi or shimx64.efi before you install Ubuntu. 


    I don't have an es1-132 and I'm all out of ideas.....good luck.




    Yeah I know how to make an UEFI compatible live usb using linux. Read the question properly I said I already have dual booted the laptop. just not getting the ubuntu entry in BIOS.  I have updated the BIOS but it doesn't has select an uefi file as trusted. Bro I appreciate your effort but read my question properly. If you don't even have an aspire es1-132 then DON'T TRY TO GIVE IDEAS RANDOMLY
  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    JackE said:
    Tried renaming the grubx64.efi file to grub.efi but still I don't get a entry named ubuntu in boot options

  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    edited September 2018 Answer ✓
    grubx64.efi is most likely. How about EFI\linux instead of \ubuntu directory? Try bootx64.efi too for good measure. Jack E/NJ

    Jack E/NJ

  • The_LoudSpeaker
    The_LoudSpeaker Member Posts: 11

    Tinkerer

    Answer ✓
    JackE said:
    grubx64.efi is most likely. How about EFI\linux instead of \ubuntu directory? Try bootx64.efi too for good measure. Jack E/NJ
    Thanks! It worked for me I copied contents of /EFI/ubnuntu to /EFI/Linux and then renamed the /EFI/Linux/grubx64.efi file to /EFI/LInux/bootx64.efi

    I guess that is mostly due to the Apollo Lake processor. Thanks again. I still have another part of my question un-answered : How do I boot an OS in legacy mode? I really want to use Linux lite. But it boots only in legacy mode.
  • JackE
    JackE ACE Posts: 45,083 Trailblazer
    edited September 2018
    >>> I really want to use Linux lite. But it boots only in legacy mode.>>>

    Your ES1-132 UEFI bootstrapper may be a harbinger of things to come in about a year or so. The BIOS emulator or compatibility layer has been removed or disabled. See the link below. Jack E/NJ
    https://www.zdnet.com/article/intel-were-ending-all-legacy-bios-support-by-2020/


    Jack E/NJ

  • sangs
    sangs Member Posts: 1 New User
    JackE said:
    grubx64.efi is most likely. How about EFI\linux instead of \ubuntu directory? Try bootx64.efi too for good measure. Jack E/NJ
    Thanks! It worked for me I copied contents of /EFI/ubnuntu to /EFI/Linux and then renamed the /EFI/Linux/grubx64.efi file to /EFI/LInux/bootx64.efi

    I guess that is mostly due to the Apollo Lake processor. Thanks again. I still have another part of my question un-answered : How do I boot an OS in legacy mode? I really want to use Linux lite. But it boots only in legacy mode.
    can u give me video tutorial?
    because after reboot
    unplug Flashdisk
    just option Boot only win 10
  • FulcrumBG
    FulcrumBG Member Posts: 1 New User
    Hi all, sorry to be a noob here, but after reading through the comments I couldn't understand exactly are these install on MMC/HDD installs or simply on the MMC drive. I have ES1-132 - C974 and I have installed my old HDD so now I have 
    1. HDD 120GB
    2. MMC 32 GB (The original one)
    If I insert bootable usb with any linux or any operating system it boots fine, but when I install anything onto the MMC it's not shown in the Boot selection menu when I press F12, does anyone else have extra HDD installed? And do you guys have the same problem? 
    Basically when I press F12 I can only see "Windows Boot Manager", supervisor password is set and i have the latest BIOS updated, and disabled secure boot. Am I missing something or this is just the way Acer have created their BIOS? Be advised - I am not very advanced user.

    Thanks in advance :)