Ubuntu Linux on a Acer Predator G3-605

whett
whett Member Posts: 5 New User
edited February 15 in 2019 Archives

I try to install Ubuntu Linux on a Acer Predator G3-605 (dual boot with the preinstalled Windows 8.1.) I have burned the Ubuntu iso-file to a DVD and in the BIOS Setup I have set the 1st Boot Device to CD&DVD. However, when booting the Windows Boot Manager takes control. There is no chance for the DVD to boot. Same situation with a USB stick. I have tried both Secure Boot enabled/disabled: same effect. When I set Windows Boot Manager to Disabled and restart, then the screen hangs with the message: "Reboot and Select proper Boot Device or Insert Boot Media in selected device and press a key". But if I do this, the same text reappears. But no boot! Help!

Answers

  • whett
    whett Member Posts: 5 New User

    I have found the solution myself: the trick is in the BIOS Setup:

    In the "Boot Options" section I set "Launch CSM" to "Always", "Boot Menu" to "Enabled". voilà!

  • zh1975
    zh1975 Member Posts: 3 New User

    Is this an older model of the G3-605 or a newer, and which Ubuntu version did you install?

    I tried the same with one of the latest models and Ubuntu 14.10 Utopic Unicorn. Any hints would be welcome.

  • whett
    whett Member Posts: 5 New User
    It's a brand new Predator. Linux Xubuntu 14.04.1
  • zh1975
    zh1975 Member Posts: 3 New User

    Thanks a lot for the answer

    I managed to start the live USB in legacy mode (and nomodeset) but not in EFI mode. Did you enter anything into the UEFI secure boot section?

  • whett
    whett Member Posts: 5 New User
    I'm still working on the EFI stuff. Booting into the installed Linux is not yet possible. Frustrating!
  • zh1975
    zh1975 Member Posts: 3 New User

    True. According to what I read, Acers don't have the best and Linux compatible implementation of UEFI.

    The following comment could interest you:

    http://ubuntuforums.org/showthread.php?t=2258575

     

    Did you disable Fastboot from within Windows and did your run Boot Repair after the installation?

    When I tried last time, I didn't even succed to boot from the UEFI formatted USB, will try again with 14.04 and look if that's better.

    Good luck!

     

  • whett
    whett Member Posts: 5 New User

    Hurray! I finally have a working dual-boot box. I have used boot-repair from a USB flash drive (I don't remember whether booted with or without CSM BIO option). And then I did exactly what this program told me to do. After typing the given bcdedit command in a Windows administrator command shell, it miraculously worked. I can now boot with CSM = "Never" and I get a selection screen with the first option being UBUNTU and then some Windows boot loaders.  Let's hope it will stay like that!

    Facit: boot-repair is a fine program.

  • javierdl
    javierdl Member Posts: 33 Enthusiast WiFi Icon

    I am so glad you share this with the community, especially since I have the same problem now Smiley Sad

    Someone from the Ubuntu Forums had advised to

    "...go into UEFI, set supervisor password and enable "trust" on the grub/ubuntu efi boot files."

    You didn't have to do that, did you?

    I'm going to try Boot Repair as you recommend though.

     

    Thanks in advance whett Smiley Happy

     

    JDL

  • amanmrafi
    amanmrafi Member Posts: 4 New User
    Anyone please help me in dual booting of ubuntu in my Acer predator g3-572. It has an SSD. Thanks in advance...
  • KTD
    KTD Member Posts: 2 New User
    A utility called Boot repair, https://help.ubuntu.com/community/Boot-Repair
     worked for dual booting an Acer Predator G3 with Windows 10 and Ubuntu 17 Linux.

    The steps were:
    Change the boot order in the BIOS to boot first with  CD/DVD
    Install Ubuntu Linux on a hard drive from a DVD.
    The system would only boot into Windows.
    Boot the system into Ubuntu Linux running live from the DVD.
    Install boot-repair into the running live Linux as described in https://help.ubuntu.com/community/Boot-Repair
      sudo add-apt-repository ppa:yannubuntu/boot-repair
      sudo apt-get update
      sudo apt-get install -y boot-repair && boot-repair

    Run the default boot-repair options in the Ubuntu, save the output from boot-repair on http://paste.ubuntu.com/ in case you need to troubleshoot more.
    Boot-repair gives you a Windows command to set the boot manager if needed - write down this command exactly.
    The system would still only boot into Windows.
    Boot to Windows.
    Run CMD as administrator.
    Set an Ubuntu boot manager

    bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi

    Then the system boot to GRUB and allows selection of Ubuntu Linux or Windows

  • KTD
    KTD Member Posts: 2 New User
    amanmrafi said:
    Anyone please help me in dual booting of ubuntu in my Acer predator g3-572. It has an SSD. Thanks in advance... Look uo Boot-Repair for Ubuntu. 

  • amanmrafi
    amanmrafi Member Posts: 4 New User
    KTD said:
    A utility called Boot repair, https://help.ubuntu.com/community/Boot-Repair
     worked for dual booting an Acer Predator G3 with Windows 10 and Ubuntu 17 Linux.

    The steps were:
    Change the boot order in the BIOS to boot first with  CD/DVD
    Install Ubuntu Linux on a hard drive from a DVD.
    The system would only boot into Windows.
    Boot the system into Ubuntu Linux running live from the DVD.
    Install boot-repair into the running live Linux as described in https://help.ubuntu.com/community/Boot-Repair
      sudo add-apt-repository ppa:yannubuntu/boot-repair
      sudo apt-get update
      sudo apt-get install -y boot-repair && boot-repair

    Run the default boot-repair options in the Ubuntu, save the output from boot-repair on http://paste.ubuntu.com/ in case you need to troubleshoot more.
    Boot-repair gives you a Windows command to set the boot manager if needed - write down this command exactly.
    The system would still only boot into Windows.
    Boot to Windows.
    Run CMD as administrator.
    Set an Ubuntu boot manager

    bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi

    Then the system boot to GRUB and allows selection of Ubuntu Linux or Windows

    Thanks Very much broo.......
  • ezeakeal
    ezeakeal Member Posts: 2 New User
    edited November 2018
    I came across this problem with the G17

    Boot repair was never required for me (it may work for others though!)
    If you're using UEFI you can instead add an EFI in the BIOS and then pick what you want to boot by hitting F12 (enable F12 boot select)
    I covered the steps I took in this answer here: https://askubuntu.com/a/1089368/375438

    Basically:
    1. (Optional) Break the included RAID setup so you can use each of the SSDs separately
    2. Enable UEFI in the BIOS and then install Ubuntu 
    3. After it's installed, you need to explicitly add the EFI to your BIOS
    4. First set a user password in BIOS (that opens up some EFI options). From there you can add the Ubuntu EFI - I used the shimx64.efi one
    Now I hit F12 on startup to pick either Win10 or Ubuntu16.04

    Windows 7 is sort of not compatible with UEFI on this hardware because of the BASS-ACKWARDS BIOS THAT COMES WITH THE MACHINE.

  • pmodi
    pmodi Member Posts: 1 New User

    How to install ubuntu on Predator

    1. Use 16.04.05

    2. Disable secure boot

    3. Connect to wifi(dunno if that’s required) and skip on the screen install ubuntu update/ install third party softwares. Just don't check anything and click continue

    4. It should take a while to install stuff

    5. Then run ubuntu in recovery mode

    6. Do sudo apt update and sudo apt upgrade

    7. Update kernel using ukuu(dunno if it’s required)

    8. If sudo apt upgrade showed firmware missing files, follow the link, second last answer, run the command:

    http://www.opengl-tutorial.org/beginners-tutorials/tutorial-1-opening-a-window/


    Command : wget --no-check-certificate https://download.01.org/gfx/RPM-GPG-KEY-ilg-4 -O - | \
    sudo apt-key add -


         9. Voila, that’s it, should work.