Display Artifacts

Okidave
Okidave Member Posts: 26 Troubleshooter
edited March 2023 in 2015 Archives

Aspire V15 Model V3-574G-55UI

Display turned red while playing game. After restart have windows title bar for facebook/skype and bottom windows taskbar  showing even during bios boot (tranparent) red tint is gone now. Random lines are now appearing also.

Video card/memory hardware issue? Or software issue?

Updated to latest Intel VGA driver from ASUS Care, still same issues. 

Windows 10 1511 x64 update applied.

 

 

Answers

  • -Justin
    -Justin Member Posts: 2,362 Skilled Specialist WiFi Icon

    okidave,

     

    You have already updated the drivers, that would have been my first suggestion.

     

    Should that fail, you can try a system restore to when it was not having this issue.

     

    You can try a refresh to see if that resolves it, if not, it sounds like you might need to have it serviced.

  • Okidave
    Okidave Member Posts: 26 Troubleshooter

    Issue is back, see attached picture, taken on bootup. Aspire V15 Model V3-574G-55UI, Windows 10 x64 v1703. Out of warranty.

    -Tried updating drivers, no fix

    -Connected to external monitor, displays correctly no issues.

    Is the issue the LED display cable or the LCD screen?

    If so, Display on boot.Display on boot.Where can I purchase the screen and cable? Screen model number from AIDA64 is LG display LP156WF4-SPL1, is this correct?

     

     

     

  • Okidave
    Okidave Member Posts: 26 Troubleshooter

    OK this is wierd the display works fine now. I is my son's laptop and he took it to school and it worked fine, then back at home it is fine also. I'm thinking it has to be the LCD cable from opening/closing the screen, it's either loose or defective. Any other ideas?

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    yes, can be a cable issue.

    I'm not an Acer employee.
  • Okidave
    Okidave Member Posts: 26 Troubleshooter

    What is the correct LCD display cable part number? I have had the back off before to add a SSD and more memory. Will I also have to remove the display bezel to replace the cable?