S227 HK Blinking Power Light Blue / Orange

iamSteve
iamSteve Member Posts: 3 New User

Hi,

 

I have just purchased a S227HK Monitor.  I have a problem straight away.....

 

When I plug my PC in (DVI) I restart and it shows the PSOT and then the windows 10 loading flag, all good until it tries to start the desktop, then I get a black screen and a flashing Blue / Orange power light.

 

If I unplug I can hear windows ding, dong, ding then plug into my old dell monitor I hear dong ding dong and the image comes straight on.  I have even tried dropping the resloution to 800x600 and the refresh to 60hz but still the acer will not show my desktop.

 

The existing DVI cable must be ok as it works fine on the dell monotors I have tried, hot plug it into the acer and it says no signal then black and the power light flashing blue / orange again.

 

Its driving me mad I want to try out this monotor and ensure I am keeping it, but currently its useless.

 

Any tips ASAP would be very much apreciated.

 

Steve.

 

Answers

  • iamSteve
    iamSteve Member Posts: 3 New User

    Just to add to my original post, I CAN start in safe mode with a resolution of about 1200x1000 (or lower) with no problems.

  • iamSteve
    iamSteve Member Posts: 3 New User

    Anyone any idea?

     

     

    Name    AMD Radeon HD 5700 Series
    PNP Device ID    PCI\VEN_1002&DEV_68B8&SUBSYS_1482174B&REV_00\4&932E434&0&0018
    Adapter Type    AMD Radeon Graphics Processor (0x68B8), Advanced Micro Devices, Inc. compatible
    Adapter Description    AMD Radeon HD 5700 Series
    Adapter RAM    1.00 GB (1,073,741,824 bytes)
    Installed Drivers    aticfx64.dll,aticfx64.dll,aticfx64.dll,amdxc64.dll,aticfx32,aticfx32,aticfx32,amdxc32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
    Driver Version    15.200.1062.1004
    INF File    oem116.inf (ati2mtag_Evergreen section)
    Colour Planes    Not Available
    Colour Table Entries    4294967296
    Resolution    1280 x 1024 x 75 hertz
    Bits/Pixel    32
    Memory Address    0xE0000000-0xEFFFFFFF
    Memory Address    0xFBCC0000-0xFBCDFFFF
    I/O Port    0x0000AE00-0x0000AEFF
    IRQ Channel    IRQ 4294967292
    I/O Port    0x000003B0-0x000003BB
    I/O Port    0x000003C0-0x000003DF
    Memory Address    0xA0000-0xBFFFF
    Driver    c:\windows\system32\drivers\atikmpag.sys (8.14.1.6463, 659.47 KB (675,296 bytes), 20/08/2015 21:46)