Acer 7741 fan or heatsink and fan needed.

jimmy7laptop
jimmy7laptop Member Posts: 16 New User

My 7741 fan is making noises and the temp is high at 186f. Normally it's 150f.  I would like to buy just the right fan and keep the heatsink. WIll the Acer 7741z or 7741g fan fit my heatsink I wonder? It's hard to tell from the photos on ebay. The fans I saw are not specifically for the 7741 and are brand new but the heatsink/fan unit is used so that fan may go bad in a short period of time.

 

This is a new fan for the 7741z and 7741g.

http://www.ebay.com/itm/301468785368?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

 

Here is the 7741 oem heatsink/fan combo used.

http://www.ebay.com/itm/161271929474?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

It would be nice to swap out the old fan for a new one for a cheaper price than buy a heatsink/fan combo.

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,297 Trailblazer

    Hello,

     

    Could you give me the first ten characters of the computer serial number (S/N)? Only the first ten.

    France
  • jimmy7laptop
    jimmy7laptop Member Posts: 16 New User

    Sure thing here it is.
    LXPXA02098             

  • laurent_14
    laurent_14 ACE Posts: 10,297 Trailblazer

    Hello,

     

    The original heatsink with fan is:

    60.WK901.001HEATSINK.CPU.UMA.W/FAN

     

    The first link you've stated is correct: It's the same fan FORCECON. The DELTA one is also compatible.

    France
  • ewwestsr
    ewwestsr Member Posts: 18 New User

    Its a bit of work to get into the fan and heatsink area, but worth it. If you'll open up the cover on the fan, you'll probably find what looks like a extra filter, but is actually a build up of dust, across the heatsink where the fans vents outwards. If you take a flashlight, with the laptop still put together, and shine it into the output vent on the side, and can't see the fan blades, then that is your problem.

    I find it best to clean it every 6 months, just to keep it in top condition.

    I upgraded my processor to a i5-480m, and it generates more heat, but with a good cleaning regiment, it has worked flawlessly for over a year since upgrade.

  • jimmy7laptop
    jimmy7laptop Member Posts: 16 New User

    Thanks for the suggestion. I looked in the vent and I can see the fan fan spinning slowly. It's been making a rattling noise so it must be the bearings. I'm about to order that new fan listed in the previous post, get it installed, and get my temps down to 39-42f again.

    I want to upgrade my cpu too and want to try to go with an i7 instead of the i5. The i7 740QM 1.73 Ghz is only 10 watts more TDP at 45 watts instead of 35 watts of my i3 cpu. I won't run the i7 it at full 100% power so the cpu won't be at 45 watts heat output. Is there a way to modify the heatsink to dissipate more heat I wonder? Maybe add more copper to the piping? If that's not an option I will upgrade to the i5 cpu. Should be a fun project.

     

    The i7 740QM 1.73Ghz is at a nice price at $54.95 with free shipping on ebay.

     

    http://www.ebay.com/itm/181642023592?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

  • ewwestsr
    ewwestsr Member Posts: 18 New User

    Heres a list of compatable cpu's with the HM55 chipset, remember though that the 7741 doesnt have a dedicated video chip, and has to rely on the Intel video on the cpu:

    http://ark.intel.com/products/43183/Intel-BD82HM55-PCH#@compatibility

     

    I'm gonna upgrade to the i7-620m when i get a chance, not much change in core speed, but 1meg more cache, and a bit more power in the video dept.

     

    http://www.ebay.com/sch/Computers-Tablets-Networking-/58058/i.html?_from=R40&LH_PrefLoc=1&_sop=15&LH_BIN=1&_nkw=i7+620&_trksid=m194&ssPageName=STRK:MEFSRCHXSmiley FrustratedRCH