acer built in webcam wont work
when i go to use the camera it says to connect a camera but i do not know what to do? I go into device manager but i get lost from there?
Answers
-
did you try a windows update or an acer update if those two didn't work then you might have to try a factory reset.
0 -
in order to do a factory reset click on the windows logo in the bottom left hand corner and search for restore and select Restore your computer to an earlier time and then click on Advanced recovery methods and then click on Return your computer to factory condition.
0 -
Go to Control Panel > Devices and Printers and see if your webcam is shown. Then go to
Device Manager > Imaging devices > open the sub menu > right click Properties, then
look at the top of the window for Power Management. Click that open and see if there
is a check mark in the box that " Allows computer to shut off device to save power".
If so uncheck the box, close that menu, go to DRIVER and then "update driver".
If a mgs comes back stating the newest driver is already installed, close all windows,
and reboot. See if the camera works. You didn't post the model num, so we don't know
where to steer you in case you need to reload the driver from Acer's support site.
0 -
I have an Acer Aspire 4820TG and the same problem. The webcam seems to be disabled, I can't find it in the device manager. When I try to reinstall the webcam application from the acer website, it says that I have no webcam. I tried what you said, but under Imaging devices in the device manager I have only "USB video device" and nothing more, and can't find power management nowhere. Can anything be done apart from a factory reset?
Thanks
0 -
I just checked one of my laptops with a camera and found the under device manger,
imaging devices, left click, up comes Acer Crystal Eye. I right click it and the menu
comes up with General, Details, and Driver. You're right, no power management or
advance menu. I believe it is a hardware prob. Did you go to Control panel > Devices
and Printers and see if the camera is shown ? Have you downloaded Acer Crystal Eye
software to see if that will activate the camera ?
This is for Acer Crystal Eye with the Chicony camera
http://acer-crystal-eye-webcam-ver-1-1-82-416.software.informer.com/
This is for Acer Crystal Eye with the Suyin camera.
http://acer-crystal-eye-webcam-video-class-came.software.informer.com/
There is also a Lite On driver listed for your unit, but I don't believe
you have a Lite On web camera. You have to discover what camera you have.
You can take it apart and pull the camera board out at the top of the screen
and see what kind it is, or load both drivers and both Acer Crystal drivers
open and install, reboot and see if new hardware is detected. If all works
you will see it in the start menu, device manager, and or Devices and Printers.
I hope this helps.
0 -
Hello everyone,
While our members are generally eager to provide useful information, be advised that Acer does not validate third party external links for downloads and is not responsible for them.
Acquiring files through such links is at the user’s own risk.0