Help with attaching 2 external screens to travel mate P2 laptop

Options
Donnad2025
Donnad2025 Member Posts: 1 Newbie
edited 4:47AM in TravelMate and Extensa

A few weeks ago I bought a travel mate P2 laptop.

I had it all set up and personalised. Last step was attacking the monitors.

I've done this 100 before by plugging 1 into the hdmi port and a small hub into a usbc port and using vga to usbc and this works.

The P2 only has 1 usbc / thunderbolt port.

I can use this port for my hub for the extra screen or I can use it for the charger.

I need it for both. I have to boost the charge then unplug it for using my extra screen.

I tried plugging a vga to hdmi adapter into my hubs hdmi port. That doesn't work.

I tried vga to usb to use one of my other usba or b ports. That doesn't work.

I've run out of options without knowiing if there is any other adapter I can try.

To add insult to injury my it firectored ordered another travel mate P2. I'm seriously thinking of sending it back. It's too much hassle.

I hope somebody can help.

Thanks

Answers

  • Puraw
    Puraw ACE, Member Posts: 17,749 Trailblazer

    Hi, your TravelMate P2 likely does not support DisplayPort Alt Mode on its USB-C port. That means even though it can handle charging and data, it cannot send video output natively through USB-C to an external monitor. This limitation is common in business-class systems where the port isn’t wired for graphics passthrough.

    If you’ve tried adapters like VGA to HDMI or VGA to USB and didn’t get results, it’s because those setups rely on the system providing video signaling — which your P2 isn’t designed to do through those ports.

    The most effective solution is to use a USB 3.0 to Dual HDMI Adapter powered by a DisplayLink chipset. Unlike basic dongles, this adapter processes video via USB and creates virtual display outputs, fully independent of your GPU's physical output capabilities.

    A good option is this adapter: https://www.amazon.com/Adapter-DisplayLink-Graphics-Outputs-Compatible/dp/B094G5JLNC?th=1

    It supports two 4K monitors at 60Hz in extended mode, giving you full multitasking ability without relying on DP Alt Mode or Thunderbolt.

    This setup also frees up the USB-C port for charging while your extra screens run off standard USB-A — avoiding the constant unplugging hassle. Just install the DisplayLink driver, plug it in, and you’re good to go.

  • StevenGen
    StevenGen ACE Posts: 14,720 Trailblazer
    edited 2:03AM

    Which exact TravelMate P2 model do you have, as one of the latest P2 models is the TravelMate TMP215-55-51NT that has the ports shown below on the left side of the laptop.

    Only use the round barrel plug for changing and the adapter provided, you can also use the Thunderbolt USB-C port for charging, with a min 65W USB-C charger. If you are using a hub, use the Thunderbolt port and the HDMI port for image outputs, as that will work with your hub. Good luck and hope this helps you out further

    TravelMate P2 15 Model: TMP215-55-51NT model left side showing the DC_In port, USB-C Thunderbolt, HDMI and USB 3.2 ports

    image.png

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • Diya1811
    Diya1811 Ally Posts: 826

    @Donnad2025

    You can use a DisplayLink USB-A to HDMI adapter with proper drivers to run an extra monitor through a USB-A port while keeping your USB-C port free for charging.

    Avoid using VGA to HDMI or VGA to USB adapters unless they’re active and driver-supported, as those often don’t work due to signal conversion issues.

    Click on "Yes" if it answers your question or Click on "Like" if you find my answer useful