V5 573P-6483 boots slowly and struggles entering BIOS, Bad motherboard, Is it PSU or battery issue?

JamesT
JamesT Member Posts: 140 Skilled Fixer WiFi Icon
edited 4:15PM in Aspire Laptops

acer aspire v5 573P is slow at booting and entering bios as seems graphics are slow is that a bad motherboard I have 4GB of Ram and 500GB HD windows 10 pro

or could it be the power supply

Power supply is a 19volt 3.42A 65walt or is it cuase the battery maybe bad as it shows 255% Available? and plugged in (that is strange)

Thank you

Answers

  • Sharanji
    Sharanji ACE Posts: 5,086 Pathfinder

    @JamesT

    It's unlikely the motherboard is faulty, but slow boot times and graphics issues on an Acer Aspire V5-573P could be due to software, outdated drivers, or hardware limitations.

    Software and Driver Issues: Ensure all drivers, especially graphics and chipset drivers, are up-to-date. You can update them through Windows Update or by visiting the Acer support page for your specific model.
    Run a full scan with a reputable antivirus program. Malware can significantly slow down system performance.
    Disable unnecessary startup programs and background applications using Task Manager to free up resources.

    Hardware Issues: A slow hard drive HDD can cause slow boot times and overall performance issues. Consider upgrading to an SSD Solid State Drive for faster boot times and improved performance. 4GB of RAM is a minimum and may be limiting performance. Consider upgrading to 8GB or more, especially if you run multiple applications or use resource-intensive programs.

    Other Potential Issues: Check if any external devices, such as USB hubs or peripherals, are causing conflicts or slowing down the system. If your CPU or GPU is overheating, it can cause performance issues. Ensure the thermal paste is in good condition and that the cooling system is functioning properly.

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊

  • JamesT
    JamesT Member Posts: 140 Skilled Fixer WiFi Icon

    when entering bios from start it goes like a courting lowering down on a stage and when going from tab to tab it is show I see when apart it has a space for a GPU fan but it is filled with a shell and no fan and when looking for the GPU fan they are for sale but on the motherboard I see no space to plug it in

    so maybe that option is not available for the V5-573P 6486 model ? My title above is incorrect it is a V5-573P-6486 model

  • Sharanji
    Sharanji ACE Posts: 5,086 Pathfinder

    @JamesT

    Could you please check whether you have a battery reset pinhole at the base cover, if it's the reset pinhole, switch off the laptop, disconnect from mains, follow the instructions in the link, leave the laptop to rest for a while before trying to start.
    Acer Internal Battery Reset

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊

  • JamesT
    JamesT Member Posts: 140 Skilled Fixer WiFi Icon

    this model has no reset pin home as seen in the picture of the case

    back.jpg
  • Sharanji
    Sharanji ACE Posts: 5,086 Pathfinder

    @JamesT

    You my try to reseat the battery and hard disk.
    Locate the screws on the underside of the laptop and remove them.Identify and disconnect the power cable connected to the battery from the motherboard. Carefully remove the battery by loosening any screws holding it in place. Reattach the battery to the laptop by reconnecting the power cable and ensuring it's properly seated.
    The hard drive is usually located near the battery or in a separate bay. Identify and disconnect the SATA cable connecting the hard drive to the motherboard. Remove the hard drive by loosening any screws holding it in place. Reattach the hard drive by reconnecting the SATA cable and ensuring it's properly seated. Reassemble the laptop by replacing the bottom case screws.

    If you're not comfortable with these procedures, consider seeking professional assistance from a qualified technician.

    To check the battery health of your laptop, you can use the Windows Command Prompt to generate a battery report. In the Command Prompt window, type the command powercfg /batteryreport and press Enter. The report will display information about the installed battery, recent usage, battery capacity history, and current battery life estimate. You can also find details about the battery's design capacity and full charge capacity.

    I hope this helps! If this was useful, please hit 'Yes' or 'Like'! Thanks! 😊

  • JamesT
    JamesT Member Posts: 140 Skilled Fixer WiFi Icon

    Will try command prompt

    as the hard drive I put i and battery don't hold a charge and gives the error of 255% which I know is wrong