CPU seeing 100 degree temps consistently my predator orion 5000 P05-640

2»

Answers

  • billsey
    billsey ACE Posts: 34,584 Trailblazer
    edited April 2023

    I expect the white fan blades reflect more, the clear blades the light goes through as well as reflect.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    well i found a youtube video explaining it, on the mobius fans they decided to put the leds on the back side instead of in the center, so that changes everything, they wanted reflected light but it doesnt look as good, but they are higher rpms and higher quality and really quiet almost to quiet heh

  • Lleztew
    Lleztew Member Posts: 10

    Tinkerer

    so question so I’m going to upgrade to the noctua cpu cooler, so is the front fan a intake and the rear fan a exhaust, and as far as putting in the fans on the top of the case those should be exhaust as well, and should I upgrade the stock fans that come with the noctua to a higher rpm fam. As my pc is seeing 140-195 degree temps not Celsius but degree and I want to stream but I don’t want to damage the pc

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    i replaced every fan in my 5000 case with cooler master mobius high velocity fans, and even on the Noctua NH-U12A.

    and yeah, both on top should be exhaust.

    and yes, for the cooler fan orientation look at the directions and images and you will see.

  • Lleztew
    Lleztew Member Posts: 10

    Tinkerer

    and then as far as getting to the 32gb ram have u found any that work as I’m wanting to upgrade that as well, and I have zero knowledge on upgrading pc anything.

  • Lleztew
    Lleztew Member Posts: 10

    Tinkerer

    and when u added the 2 exhaust on the top did you have enough plugs on the mb or did u have to purchase like a muli plug for the extra fans

  • Lleztew
    Lleztew Member Posts: 10

    Tinkerer

    and also did u go with the noctua- chromax , I seen in a few pics u posted it was black instead of the chrome and brown

  • Lleztew
    Lleztew Member Posts: 10

    Tinkerer

    so should I purchase the m3 by 10mm screws as well

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    well, anything will work with the acer branded mb's, i even had 2x24@7200 in mine at one time but it wouldn't post-run on 7200 and that was a limitation of the IMC on my 12700K. so i had to run 4400 the default.

    i also had 2x16@7000 same issue my 12000F i had at that time wouldn't run 7000 then one other time i had it running on 2x16@6200.

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    well, the Noctua cooler comes with a fan splitter so use that for the 2 fans on the cooler and that will plug into the same port on the mb where the original cooler fan was-is.

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    yeah, i went with the all black chromax look i do not like that silver-brown theme.

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    yes unless you are taking out the acer mb and using the hardware in the Noctua kit for the cooler.

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    It's worth noting that 140-195F is only 60-90C, so no real cooling issues there. The Noctua will help to drop that max by 10-15C.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Lleztew
    Lleztew Member Posts: 10

    Tinkerer

    hey chug so on these mobius fan is the air flow exhaust the side that says cooler master ?

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    use this as your guide for fans and how they should be facing.

    so, every fan you see here is an exhaust and correct.

    but also, when in the front of the case they are intake even though they are all facing the same way.

    so, it all depends on the placement in the case to be labeled as intake-exhaust, yet all face the same way.

  • LolPCs
    LolPCs Member Posts: 2 New User

    hey Chug did you take out the mb to install the NoctuaNH-U12A? Just bought it and having trouble

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon
  • LolPCs
    LolPCs Member Posts: 2 New User

    so thank you i did it i just unplugged one of my top case fans because both fans on the cooler were 4 pin and there was only a 3 pin slot left is there anyway to put my top fan back into the 3 pin even though its a 4 pin fan?

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    I believe you use a Y cable to connect the two fans to the one four pin connector.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.