Acer PO7-650 XMP Profile.will I be able to activate the xmp profile if i buy compatible RAM

ervento573
ervento573 Member Posts: 1 New User
edited April 22 in Predator Desktops

ORIGINAL:

Guten tag, habe einen acer predator orion 7000 mit rtx 4090 und i7 13700KF, der ram taktet jedoch nur auf 4400 mhz, und XMP kann ich nicht aktivieren.

wenn ich mir ram mit 6000 Mhz xmp compatibilität kaufe werde ich dann das xmp profil aktivieren können? oder lässt das motherboard in keinem fall XMP zu?

TRANSLATED:

Hello, I have an acer predator orion 7000 with rtx 4090 and i7 13700KF, but the ram only clocks at 4400 mhz and I can't activate XMP.If I buy RAM with 6000 Mhz xmp compatibility will I be able to activate the xmp profile? or does the motherboard never allow XMP?

[Translated using Google]

Answers

  • Hallo,
    Haben Sie versucht, XMP in den erweiterten Einstellungen zu aktivieren? Wenn Sie es nicht aktivieren können, müssen Sie möglicherweise ein Supervisor-Passwort erstellen und es dann in ein XMP-Profil ändern.

    Wenn Sie ein Supervisor-Passwort einrichten müssen, erstellen Sie bitte ein einprägsames oder schreiben Sie es auf. Sobald Sie mit der Umstellung auf XMP fertig sind, müssen Sie das Passwort löschen, da Sie es möglicherweise bei jedem Neustart des PCs eingeben müssen.

    Bitte lesen Sie online, wie Sie ein Supervisor-Passwort einrichten, und machen Sie sich damit vertraut, bevor Sie mit der Einrichtung beginnen.

    Remove a BIOS Password - Acer Community

    Hi,
    Have you tried enabling XMP in Advanced settings, if you can not enable it, you may have to create a Supervisor password, then you can change it to XMP profile.
    If you have to setup a Supervisor password, please make a memorable one or write it down, once you have finished with switching to XMP, you have to clear the password because you may have to enter it every time you boot the PC.
    Please read about setting up a Supervisor password online and get familiar with it before start setting up,

    Screenshot 2024-12-06 164023.jpg Screenshot 2024-12-06 165659.jpg Screenshot 2024-12-06 165842.jpg Screenshot 2024-12-06 171642.jpg
  • billsey
    billsey ACE Posts: 36,223 Trailblazer
    edited December 2024

    You just have to make sure all memory on the system supports the same XMP profile. If any doesn't then XMP will stay disabled.

    Sie müssen lediglich sicherstellen, dass der gesamte Speicher im System dasselbe XMP-Profil unterstützt. Wenn dies nicht der Fall ist, bleibt XMP deaktiviert.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Dominik98
    Dominik98 Member Posts: 21 Troubleshooter

    Hello everyone, is there a big difference between the PO7-650 and PO7-655 with XMP ? I would also change my ram because it runs only with 4400 Mhz ! My Predator 7000 has an i7-14700 KF and RTX 4090

  • Chris_Z
    Chris_Z Member Posts: 19 Troubleshooter
    edited April 22

    In some countries the original Acer modules are not marketed, so this is not a trivial task to assure the XMP compatibility.

    With CPU-Z tool, one can list how current XMP setup looks like (Timings Table) and then try to match it with corresponding data from other manufacturers. With some luck it may work.

    Here is an example of different modules which do work together on my PO7-660 but because there is no match in XMP set, so 4400 Mhz is all I get (one can see that there is a timing overlap between JEDEC#10 and XMP-5600, but while JEDEC is a base frequency, the XMP is overclock, so no luck).

    The 32 GB module is Acer Original BTW.

    160_32.jpg 160_48.jpg
  • Dominik98
    Dominik98 Member Posts: 21 Troubleshooter

    thank you very much ! What Kind of ddr5 ram with RGB Light can i use maybe predator vesta ll