Nitro5AN515-55-NVIDIA GeForce 1650 reports as disabled on startup, graphics card gets overheated up.

VagueAngel
VagueAngel Member Posts: 5

Tinkerer

edited October 21 in Nitro Gaming

Good morning.

I have an Acer Nitro 5 laptop with the NVIDIA GeForce GTX 1650 (model AN515-55). A couple months ago, I started noticing the laptop was running really hot. I blew out the vents and still had the same issue. Then I cleaned the vents internally as well. In the meantime, there were a few times while playing Diablo 4 that a blue screen popped up that read Windows has encountered a problem. I restarted and the video card was disabled. I disabled/re-enabled the video card via Windows Task Manager and re-started. Everything was fine for a bit, then it happened again. I repeated this process 2 or 3 more times. The last time I was good for about 2 or 3 weeks, then the same thing occurred. I've used DDU to uninstall the drivers and re-install them. But when I restart, the NVIDIA is disabled again.

I'm guessing this means my graphics card probably overheated one too many times and is no longer functioning, but I would really appreciate it if anyone else could offer some other insights into something I may have missed.

[Edited the thread to add model name and issue detail to the title]

Best Answers

  • StevenGen
    StevenGen ACE Posts: 12,528 Trailblazer
    Answer ✓

    The only thing that you can do is what you have done and make sure that you are running the last bios version 2.06 and you have also updated the firmware version v101a that "Update Nvidia discrete VGA VBIOS and improve performance" that are on the Acer support page for the AN515-55. If you have done all this and the GTX1650 still doesn't get detected then there is a possibility that your gpu is fried and the only choices that you have is to use the cpu graphics or change the mainboard for a better RTX gpu that the AN515-55 higher spec laptops came with. Good luck and hope this helps you out.

    Note: in the Acer Nitro AN515-55 service guide there is a list of VGA CHIP and part numbers (see caption below) phone either Acer Tech Support in your country or a knowledgeable technician and find out if those gpu chips are available from Acer and/or the gpu chip can be changed to one of the VGA CHIPS that Acer has part numbers for below, this is another alternative that could be cheaper than a new mobo:

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • VagueAngel
    VagueAngel Member Posts: 5

    Tinkerer

    Answer ✓

    @AnhEZ28

    I've already cleaned out the fan and vents. I'll replace the thermal paste. Thank you for the quick response!

Answers