I would like to replace the PSU in TC-895-EB11 6 pin power cable/conector

13»

Answers

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    The green wire is the power enable wire.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • gptechman
    gptechman Member Posts: 5 New User

    Well apparently its not because i tinkered around with all the wires from my 24-pin PSU with the 6-Pin Adapter and doesn't make any difference. it may be a special "Sense" wire.

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    Here are the pinouts:

    Normally the wiring is color codes, with yellow being +12V, back being GND and green being PS_On. With some Acer MBs odd things happen if you actually connect the return GND that matches PS_On and with other weird things happen if you don't connect that wire.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • gptechman
    gptechman Member Posts: 5 New User

    yes if i connect or "short" to gnd then its somewhat okay, but the PSU will be running non-stop either way if its connected or not.

  • larryKuch
    larryKuch Member Posts: 2 New User

    pinout for a SFX psu (note SFX will fit original case)

    https://www.reddit.com/r/CableManagement/comments/mr7dj0/help_making_custom_cables_for_evga_550_gm_sfx/#lightbox