Updated Version of Intel UHD Graphics Predator Triton 500 SE 2021 PT516-51s

that's bad to heard that

I found a work around to have the latest official drivers, but you will lose about 21hz.

So this issue only seems to happens with 165hz refresh rate, so you can add more custom refresh rate with Custom Resolution Utility (CRU)

Steps:

-Set you monitor to 60Hz

-Update to the latest official intel drivers

-Use CRU to set the new custom resolutions (i recommend; 60Hz, 75Hz, 90Hz, 120Hz, 144Hz), you just have 5 slots to add.

Note: you can use the Native PC option as is easier

-Then use the restart.exe or restart64.exe to refresh the monitor.

-Restart you pc with the 60Hz set.

Now you should be able to select any of the configurations except 165hz as its goes back to the last selected refresh rate.

Additional notes:

-Every time you refresh using the restart/64.exe you will be able to select 165Hz and it will work as far as the computer is turned on, do not restart the pc when in 165 or it will black when turns on.

-Just to make sure you can try to run the restart.exe after installing the new drivers and restarting the pc instead.

-CRU does not allow you to add 2560x1600(2k) with 165hz but you should be able to add 1080p (haven't tested yet if that resolution works as well as 1600i)