How to fix Acer Care Center is still initializing and how to startup care center austomatically?

Options
chandaashoka
chandaashoka Member Posts: 14

Tinkerer

I reinstalled acer care center yesterday and i updated it from acer support site and after that it will not startup automatically when laptop on and when i try to open it it will not open and says acer care center is still initilizing and i think i did a very poor mistake because before that it had work properly and when computer on then automatically it had startup but now it not happen please tell me how to fix this problem??

Best Answer

Answers

  • Lia333
    Lia333 Member Posts: 1 New User
    edited March 2023

    I'm using Windows 11 and billsey's solution (Task Manager > Run New Task > ACCStd.exe) worked to startup Acer Care Center again but the problem kept coming back every so often. If this is a reoccurring problem for you too, I found a solution that lasts longer:

    1. Locate and right-click the "ACCStd.exe" file in (Program Files (x86) > Acer > Care Center)
    2. Click "Properties" and select the "Compatibility" tab
    3. Enable the checkboxes for "Run this program as an administrator" AND "Register this program for restart"
    4. Hit "Apply" and "OK"

    If this also worked for you, give a 👍 Like 👍 to bump up this solution.

  • shubhamsci011
    shubhamsci011 Member Posts: 5

    Tinkerer

    edited April 2023

    It worked for me. (But we have to right-click on ACCstd instead on ACCstd.exe and follow the process as the writer said). Thank you!!

  • billsey
    billsey ACE Posts: 36,312 Trailblazer

    You just have the file extensions display turned off, that's why it shows only ACCStd instead of ACCStd.exe.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Shubham07
    Shubham07 Member Posts: 1 New User

    Sometime "Run this program as an administrator" AND "Register this program for restart", may not happen to you, but happen to me, then in compatibility, there is button "Run compatibility troubleshoot ", it will fix problem, for extra solution, sometime above solution is enough., Thanks for above solution, i able to solve many time, when i don't know this one also.

  • jfarmer3
    jfarmer3 Member Posts: 1 New User

    I had to right click on ACCSvc.exe to access the compatibility tab in Win 11.

  • Puraw
    Puraw ACE, Member Posts: 17,874 Trailblazer

    I found that Acer Care Center does not run properly in Windows11, hangs, interferes with W11 Wau updates and the battery limiting option conflicts with BIOS and MS APC battery control. You don't need any of these apps, IMO either disable it or uninstall ACC. Even after uninstalling ACC some remnants remain in the W11 registry.

  • Carl_Cee
    Carl_Cee Member Posts: 1 New User
  • Cyb3r_N1gh7m4r3
    Cyb3r_N1gh7m4r3 Member Posts: 1 New User
    • Screenshot 2025-07-06 110721.png Screenshot 2025-07-06 110805.png Screenshot 2025-07-06 110840.png Screenshot 2025-07-06 110905.png Screenshot 2025-07-06 110927.png Install all dependencies from the folder/archive "Acer Care Center/CareCenterUWP/x86 and x64".
    • Then install the actual "Acer Care Center" and restart your computer.
    • Try to open it — it should display: "Acer Care Centre is still Initializing". Close it.
    • Open "Task Scheduler" and from the right-hand menu click "Create Task...".
    • In the "General" tab, fill in the following fields:
      • Name: AcerCareCenter(FIX)
      • Description: ACCStd (AutoStart Fix)
      • Check "Run with highest privileges"
      • Set "Configure for" to: Windows 7, Windows Server 2008 R2
    • Click "Change User or Group...", then click "Advanced", then "Find Now", select "Administrators" from the list, click "OK", and then "OK" again.
    • Go to the "Triggers" tab and click "New..."
      • Under "Begin the task", select: At startup
      • In "Advanced settings", check "Enabled" and "Delay task for"
      • Set "Delay task for" to: 30 seconds and click **"OK"`
      • (If your machine starts slowly, increase the delay to one minute or more.)
    • Go to the "Actions" tab and click "New..."
      • Action: Start a program
      • Program/script: browse to the path of ACCStd.exe
        • In my case: "C:\Program Files (x86)\Acer\Care Center\ACCStd.exe" (your path may differ)
      • Add arguments (optional): -auto
      • Start in (optional): in my case: C:\Program Files (x86)\Acer\Care Center
      • Click "OK"
    • Go to the "Conditions" tab and uncheck all boxes (if any are checked).
    • Go to the "Settings" tab and check the following:
      • Allow task to be run on demand
      • Run task as soon as possible after a scheduled start is missed
      • If the task fails, restart every: 1 hour
      • Attempt to restart up to: 24 times
      • If the task is already running: Do not start a new instance
      • Click "OK"
    • Restart your computer and after logging in, wait according to the delay time you set.
      (You can check if ACCStd.exe is running in Task Manager > Details.)
    • Open Acer Care Center and enjoy its functionality.
      (If you want, you can also set Acer Care Center to start automatically.)