How do i change my Simple Volume back to Primary Partition

Trackerskill13
Trackerskill13 Member Posts: 19 Troubleshooter




I was trying to move my unallocated so i was messing around a little and it went to simple volume and i dont know how to get it back and move my space into it

Answers

  • JackE
    JackE ACE Posts: 44,876 Trailblazer

    Disk0 file system has been corrupted. Do you have any data on it that you want to try to recover?

    Jack E/NJ

  • Trackerskill13
    Trackerskill13 Member Posts: 19 Troubleshooter
  • wascas
    wascas Member Posts: 1,228 Overclocked Contributor WiFi Icon
    edited August 2022

    @Trackerskill13,

    sorry, but I don't understand what you want to do with your new hard drive.

  • JackE
    JackE ACE Posts: 44,876 Trailblazer

    OK. Good. Follow this procedure

    (1) Search 'cmd' in Windows start menu.

    (2) Right click command prompt near top of menu.

    (3) Click run as administrator.

    (4) Enter 'diskpart'

    (5) At the DiskPart> prompt enter 'list disk'

    (6) Then enter 'list volume'

    Then post a screenshot of the DiskPart results if possible

    Jack E/NJ

  • Trackerskill13
    Trackerskill13 Member Posts: 19 Troubleshooter

    i have to go ill be back in a couple of hours

  • JackE
    JackE ACE Posts: 44,876 Trailblazer

    DiskPart looks OK except the new D : \ drive Disk0 is MBR partitioned. Which should not be causing corruption as reported by Disk Manager. Just accessing the drive with DiskPart might've fixed the GUI issue. So for now let's exit DiskPart by entering 'exit'. Then exit the command prompt. Then press WIN+R. Enter 'diskmgmt.msc'. Please post the screenshot again. If the same RAW filesystem corruption, Then open FileExplorer and see if you can access the D : \ drive.



    Jack E/NJ

  • Trackerskill13
    Trackerskill13 Member Posts: 19 Troubleshooter
  • JackE
    JackE ACE Posts: 44,876 Trailblazer

    Congratulations. Thanks for reporting back on your success. 🙂

    Jack E/NJ

  • Trackerskill13
    Trackerskill13 Member Posts: 19 Troubleshooter
  • JackE
    JackE ACE Posts: 44,876 Trailblazer

    Looks OK to me. Doesn't have any files on it yet. Try opening File Explorer to access the D : \, not Task Manager. It should be empty.

    Jack E/NJ

  • Trackerskill13
    Trackerskill13 Member Posts: 19 Troubleshooter
  • JackE
    JackE ACE Posts: 44,876 Trailblazer

    That's because D : \ is empty. No files, no programs, no apps, no folders have been put in it yet. It's like an empty filing cabinet. Plenty of space for all these things. But you haven't put anything in it yet. Would you like to put something in the D : \ filing cabinet that you can see?

    Jack E/NJ

  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,315 Trailblazer
    edited August 2022

    I returned. I was helping the user on another thread. It looks like it wants disk 0 to be the primary partition with the OS installed. Before, disk 0 was set to RAW and it solved the problem. Disk 1 was now configured as dynamic disk. As I had said in the other thread, it needs to backup the operating system and personal files, to convert disk 1 to basic again. Then he can use the operating system backup to install windows on disk 0:

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • JackE
    JackE ACE Posts: 44,876 Trailblazer
    edited August 2022

    I don't think there's a problem anymore. The system boots fine and the D : \ drive seems ready to store files and folders from File Explore. See below. I suspect the user is not familiar with File Explore. Also, I'd probably leave the dynamic disk as is if all works OK. It can be changed back with 3rd party partition managers without losing data or reinstalling the OS but may not be necessary.



    Jack E/NJ