Updating ssd Nitro 5 AN515-55--53E5.

Toones
Toones Member Posts: 6 New User
edited March 2022 in Nitro Gaming
I would like to update the ssd on my Acer Nitro 5 AN515-55-53E5.  

 I am considering the WD_BLACK SN750 NVMe Gaming 1TB PCIe Gen 3 x4 Internal Solid State Drive

How do I do this?

{Thread was edited to add model name to the title}


Answers

  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    edited March 2022
    There should be two NVME sockets. Do you want to add it to the  SSD already have installed? Or  do you want to replace the SSD already installed?  Here's a link to others who have upgraded this model. https://community.acer.com/en/discussion/615317/upgrading-ram-and-ssd-for-acer-nitro-5-an515-55-53ag

    Jack E/NJ

  • Toones
    Toones Member Posts: 6 New User
    I would kind of like to replace for simplicity and speed
  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    You should have one of the fastest SSDs installed from the factory already. Why do you want to replace it?

    Jack E/NJ

  • Toones
    Toones Member Posts: 6 New User
    I just need more space
  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    Then the easiest approach is to simply the add the NVME to empty m.2 socket which is next to the RAM sockets on your mainboard. The WD blue series NVME will likely run just as fast as the black series. The  blue series 1TB drive is about the  best NVME deal right now.


    Jack E/NJ

  • padgett
    padgett ACE Posts: 4,532 Pathfinder
    Agree decent SSDs are about $80/TB these daze. I just like using badge-engineered Acer products in an Acer.
  • Toones
    Toones Member Posts: 6 New User
    How do I upgrade and replace?
  • StevenGen
    StevenGen ACE Posts: 12,843 Trailblazer
    edited March 2022

    Toones said:
    How do I upgrade and replace?
    What is your laptop model number? As the "upgrade and replace" depends on that. Another factor that I want to add, as I've got the M,2 WD 512GB SN550 fitted OEM on my Nitro 5 and the upper series WD SN's 1TB of the SN750 is at USD $129.99 and the SN850 is at USD $169.99 which are all on special and you also get a free $69.00 hoodie to boot are great value from WD direct, so consider that also as the M.2 SN850 top of the range WD M.2 product should be a rocket at: Sequential Read Performance 7000MB/sand and Sequential Write Performance 5300MB/s or consider the more expensive Samsung 980 Pro 1TB PCIe 4.0 NVMe M.2 SSD at around USD $180.56 which I use (on an AMD gaming desktop) and its unbelievably quick  and considered one of the  best M.2 NVMe around.

    Remember going to these upper spec M.2 drives will definitely improve your performance and reduce your wallet capacity :D in comparison to whatever you have OEM on your laptop now as there is no comparison but and the most important is "your laptop able to utilize the max PCIe 4.0 x4 speeds"? And also what you intend your laptop to be used for and if its worth the extra cost? 
  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    You must first remove 11 screws from bottom cover and pry cover off. Then insert the NVME card into the open m.2 socket at an angle and push it down. Then hold it down with a screw that should be included with your new NVME card.


    Jack E/NJ

  • padgett
    padgett ACE Posts: 4,532 Pathfinder
    A strong magnetic screwdriver helps.
  • Toones
    Toones Member Posts: 6 New User
    once I get the new ssd installed, how do I ghost it to replace the smaller one?
  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    You have two m.2 sockets. Why do you want to remove the smaller one?  You can use both NVME cards at the same time for even more storage.

    If you still want only one installed, then you must ghost or clone the smaller drive onto the bigger using cloning/migration freeware like Macrium Reflect or AOMEI backerupper.This is much more complicated  If you're not experience in doing this sort of thing, I recommend using both cards at the same time. Much simpler.

    Jack E/NJ

  • Toones
    Toones Member Posts: 6 New User
    I want to be able to execute and store on one drive for speed, efficiency, and simplicity
  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    You have all that with two drives plus the safety of two-drive redundancy. But it's your system, so you do what you'd like. You can clone/migrate in two ways.

    (1) First way is to insert the new drive in the empty m.2, socket. Then clone the old drive onto the new drive. Then remove the old drive and try to boot from the new drive by itself

    (2) Or you can buy an inexpensive USBA3-to-NVME card adapter. Insert the new drive into the adapter. Then clone the old drive onto the new drive through the USB port. Then replace the old drive with the  new drive in the same m.2 socket.

    Jack E/NJ

  • mhtnitro5
    mhtnitro5 Member Posts: 1 New User
    StevenGen said:

    Toones said:
    How do I upgrade and replace?
    What is your laptop model number? As the "upgrade and replace" depends on that. Another factor that I want to add, as I've got the M,2 WD 512GB SN550 fitted OEM on my Nitro 5 and the upper series WD SN's 1TB of the SN750 is at USD $129.99 and the SN850 is at USD $169.99 which are all on special and you also get a free $69.00 hoodie to boot are great value from WD direct, so consider that also as the M.2 SN850 top of the range WD M.2 product should be a rocket at: Sequential Read Performance 7000MB/sand and Sequential Write Performance 5300MB/s or consider the more expensive Samsung 980 Pro 1TB PCIe 4.0 NVMe M.2 SSD at around USD $180.56 which I use (on an AMD gaming desktop) and its unbelievably quick  and considered one of the  best M.2 NVMe around.

    Remember going to these upper spec M.2 drives will definitely improve your performance and reduce your wallet capacity :D in comparison to whatever you have OEM on your laptop now as there is no comparison but and the most important is "your laptop able to utilize the max PCIe 4.0 x4 speeds"? And also what you intend your laptop to be used for and if its worth the extra cost? 
    I have Acer Nitro 5 AN515-55-53E5 and put a Sabrent Rocket 4 Plus in, but when I installed the Win 11 OS on it it started to overheat and throttle. I've ordered a copper shield and it arrives tomorrow. I'll try again. Is the Acer Nitro 5 AN515-55-53E5 truly able to handle PCIe 4.0 x4? Or should I revert to Gen 3? Will I see performance upgrade if I can get the Gen 4 to run with the copper shield without throttling and put the OS on it?
  • JackE
    JackE ACE Posts: 45,203 Trailblazer
    edited April 2022
    The AN515-55 spec is PCIe Gen3x4 buss. Not Gen4x4. While bleeding-edge tech is supposed to be backward compatible, it often isn't.


    Jack E/NJ