Boot logo costumization option missing predator helios 300 ph315-52

2»

Answers

  • Prekky
    Prekky Member Posts: 23 Networker
    AnhEZ28 said:
    @Prekky did you restart the laptop to apply the setting?
    Yes i had restarted
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    JackE said:
    Then you're only choice is to try to do an ALT+F10 cold boot factory reset if this customization  is so important to you.  This will only work if you have not already corrupted or deleted the hidden factory reset partition. The reset will return the laptop system to a fresh out of the box state like when you first acquired the laptop. What do you want to do?
    oh umm so it will hard reset the laptop?

    If the hidden factory partition is still intact, the ALT+F10 cold boot reset will return the ACER OEM Windows operating system to the state it was in when you first acquired and turned on the laptop. What do you want to do?


    Jack E/NJ

  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,322 Trailblazer
    The ph315-52 model does not allow customizing the boot logo. The ph315-52 only allows you to disable and enable the sound and animation during system boot.
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Prekky
    Prekky Member Posts: 23 Networker
    JackE said:
    JackE said:
    Then you're only choice is to try to do an ALT+F10 cold boot factory reset if this customization  is so important to you.  This will only work if you have not already corrupted or deleted the hidden factory reset partition. The reset will return the laptop system to a fresh out of the box state like when you first acquired the laptop. What do you want to do?
    oh umm so it will hard reset the laptop?

    If the hidden factory partition is still intact, the ALT+F10 cold boot reset will return the ACER OEM Windows operating system to the state it was in when you first acquired and turned on the laptop. What do you want to do?


    i would much rather not cold reset it i will if needed for now let it be like that.
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Seems like a good decision to me.  :)

    Jack E/NJ

  • Kousei
    Kousei Member Posts: 13

    Tinkerer

    I FINALLY FOUND THE 100% WORKING INSTALLATION FOR CUSTOM BOOT ANIMATION FOR PREDATOR SENSE


    1. FIRST MAKE SURE IN THE BOOT MENU YOU ENABLE POST ANIMATION AND SOUND

    User: "User: "jnn33zb4q0sc.jpg""





    2. INSTALL PREDATOR SENSE FROM THE SUPPORT PAGE OF YOUR DEVICE

    User: "User: "k3f0noeutq3v.png""





    3. RENAME YOUR WINDOWS INSTALLED DRIVE AS EFI

    ex:

    User: "User: "image.png""





    4. Change the registry value to 1 of Customize_POST_Support in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PredatorSense

    User: "User: "Screenshot_20230103_045451.png""





    4. Open CMD (command) as Admin and run the following commands (Right-click on it and "Run as Administrator"):

    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.22000.1

    Copyright (C) Microsoft Corporation.On computer: WTFPREDATOR


    (HERE SELECT THE DISK WHICH HAS YOUR WINDOWS RECOVERY INSTALLED, HERE IN MY CASE IT IS DISK 1)

    User: "User: "image.png""





    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> select partition 1

    Partition 1 is now the selected partition.

    DISKPART> assign letter=b

    DiskPart successfully assigned the drive letter or mount point.

    User: "User: "Screenshot_20230103_050407.png""





    5. Download the explorer++ program from https://explorerplusplus.com/software/explorer++_1.3.5_x64.zip, here I used version 1.3.5_x64. Run it as ADMIN (Right click on it and click on "Run as Administrator");


    6. Locate drive B on the left inside the application and click on properties, and on the "General" tab put the drive name as ESP and click OK;


    7. Expand drive B >> EFI and inside the EFI folder and create a folder called OEM;

    User: "User: "image.png""





    8. Close everything and restart

Categories