Acer es1 132 updating the wifi card

13»

Answers

  • v12nut
    v12nut Member Posts: 28 Enthusiast WiFi Icon
    JackE said:
    >>> just after I selected the cdrom for boot,>>>

    What CDROM are you referring to? Are you booting from a USB Mint install stick or not?

    Sorry, I am booting from an iso image on a usb cdrom.

  • JackE
    JackE ACE Posts: 44,897 Trailblazer
    edited December 2021
    Might very well be the reason that the grub bootloader isn't properly installing. Also must be installed alongside 64-bit Win10.  Prepare a GPT-partitioned scheme FAT32 formatted USB stick using Rufus and the preferred Cinnamon 20.2 iso.

    PS: One more point. The USB stick must be booted from the BIOS F12 boot menu so that the WindowsBootMgr is not involved in the Mint installation, else the GrubBootLoader may be rendered inactive.

    Jack E/NJ

  • v12nut
    v12nut Member Posts: 28 Enthusiast WiFi Icon
    JackE said:
    Might very well be the reason that the grub bootloader isn't properly installing. Also must be installed alongside 64-bit Win10.  Prepare a GPT-partitioned scheme FAT32 formatted USB stick using Rufus and the preferred Cinnamon 20.2 iso.

    PS: One more point. The USB stick must be booted from the BIOS F12 boot menu so that the WindowsBootMgr is not involved in the Mint installation, else the GrubBootLoader may be rendered inactive.

    Mint was started using F12 and installed alongside win10 64bit from the usb cd. I will try with a usb stick prepared as you suggest, what will the difference be between the usb stick and a usb cd?
  • JackE
    JackE ACE Posts: 44,897 Trailblazer
    The DVD drive hardware in between the Mint iso the DVD disc and the HDD.

    Here is the procedure. Please pay special attention to step #10 cuz sometime the GRUB efi file has to be manually loaded into UEFI bootstrap memory. It sometimes doesn't load automatically.

    ( 0) Pre-shrink Windows partition to desired unallocated space for Linux installation. Shrink it a lot if you want
    ( 1) Make bootable GPT/FAT32(default) stick from the Linux installation iso with Rufus, a freeware download.
    ( 2) Set BIOS supervisor password(SECURITY), disable secure boot(BOOT)& enable F12 Windows boot mgr (MAIN). Save BIOS settings & exit. May not be needed with some Linux installations like Mint.
    ( 3) Shutdown & insert bootable Linux stick
    ( 4) Turn back on while immediately tapping F12. Select Linux stick to run.
    ( 5) Preferrably select a default Linux install option
    ( 6) Follow on-screen instructions to install alongside Windows.
    ( 7) Let Linux automatically set & resize partitions for Linux & its swap. Adjust for more or less space only if absolutely necessary.
    ( 8) Shutdown & remove Linux stick.
    ( 9) Turn back on while tapping F2.
    (10) Re-enable secure boot(BOOT) & select UEFI file as trusted(MAIN). Select HDD0, SSD0 or eMMC0, then <EFI>, then <ubuntu>, then grubx64.efi the UEFI file. Enter grubx64.efi in the space provided if selecting it doesn't automatically enter it. Save BIOS setting and exit.
    (11) Boot into Windows. Then shutdown again.
    (12) Turn back on while tapping F12.
    (13) Sometimes you can interchange grubx64.efi with Windows boot manager in UEFI bootstrapper BOOT section to select which default boots



    Jack E/NJ

  • v12nut
    v12nut Member Posts: 28 Enthusiast WiFi Icon
    JackE said:
    The DVD drive hardware in between the Mint iso the DVD disc and the HDD.

    Here is the procedure. Please pay special attention to step #10 cuz sometime the GRUB efi file has to be manually loaded into UEFI bootstrap memory. It sometimes doesn't load automatically.

    ( 0) Pre-shrink Windows partition to desired unallocated space for Linux installation. Shrink it a lot if you want
    ( 1) Make bootable GPT/FAT32(default) stick from the Linux installation iso with Rufus, a freeware download.
    ( 2) Set BIOS supervisor password(SECURITY), disable secure boot(BOOT)& enable F12 Windows boot mgr (MAIN). Save BIOS settings & exit. May not be needed with some Linux installations like Mint.
    ( 3) Shutdown & insert bootable Linux stick
    ( 4) Turn back on while immediately tapping F12. Select Linux stick to run.
    ( 5) Preferrably select a default Linux install option
    ( 6) Follow on-screen instructions to install alongside Windows.
    ( 7) Let Linux automatically set & resize partitions for Linux & its swap. Adjust for more or less space only if absolutely necessary.
    ( 8) Shutdown & remove Linux stick.
    ( 9) Turn back on while tapping F2.
    (10) Re-enable secure boot(BOOT) & select UEFI file as trusted(MAIN). Select HDD0, SSD0 or eMMC0, then <EFI>, then <ubuntu>, then grubx64.efi the UEFI file. Enter grubx64.efi in the space provided if selecting it doesn't automatically enter it. Save BIOS setting and exit.
    (11) Boot into Windows. Then shutdown again.
    (12) Turn back on while tapping F12.
    (13) Sometimes you can interchange grubx64.efi with Windows boot manager in UEFI bootstrapper BOOT section to select which default boots




    Thanks for this Jack, I shall give it a go, one question on how to disable secure boot on my machine? if you look back at the last pic of my bios screen it shows no option to 'disable' only to erase settings, how should I proceed in this case?
  • JackE
    JackE ACE Posts: 44,897 Trailblazer
    You must first set & save a BIOS supervisor password in the Security tab. Then re-enter the BIOS with the supervisor password to disable secure boot.

    Jack E/NJ

  • v12nut
    v12nut Member Posts: 28 Enthusiast WiFi Icon
    JackE said:
    You must first set & save a BIOS supervisor password in the Security tab. Then re-enter the BIOS with the supervisor password to disable secure boot.
    as you will see in that last pic, I have already set a password and re entered Bios with it but no other secure boot options open up

  • JackE
    JackE ACE Posts: 44,897 Trailblazer
    Sorry, I don't see last pic? Press CTRL+S in Security and Boot tabs to see if any secure boot options appear like shown below.

      

    Jack E/NJ

  • v12nut
    v12nut Member Posts: 28 Enthusiast WiFi Icon
    JackE said:
    Sorry, I don't see last pic? Press CTRL+S in Security and Boot tabs to see if any secure boot options appear like shown below.

      

    Here it is, I will try ctrl+s .
  • v12nut
    v12nut Member Posts: 28 Enthusiast WiFi Icon
    Ctrl+s has no effect
    v12nut said:
    JackE said:
    Sorry, I don't see last pic? Press CTRL+S in Security and Boot tabs to see if any secure boot options appear like shown below.

      

    Here it is, I will try ctrl+s .

    Nope, CTRL+S does not open up any other options for me
  • JackE
    JackE ACE Posts: 44,897 Trailblazer
    What happens when you go to the BOOT tab and click on the secure boot enabled option? Also check your BIOS version number again.

    Jack E/NJ