Not able to run persistence (Kali) on Acer aspire 1, ACPI issues Aspire one 1-431

2»

Answers

  • Lightnin
    Lightnin Member Posts: 18 Troubleshooter
    Leostat said:
    Yeh that error is pre boot leave it off! I don't think Kali distributes a valid cert which you can import , what happened with single user on and secure boot off? 
    Seems to want to boot, has gotten further than any other option. Just sits on cursor endlessly seems. 
  • Lightnin
    Lightnin Member Posts: 18 Troubleshooter
    Not sure why the photo didn’t stay in last comment...
  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    What's the full kernel line you are using when you get that? And is it static or blinking? 

    Try hitting cntrl + alt + f1.  Through F10, see if any of the other TTYs respond 
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    If a BIOS supervisor password has been set -- and secure boot has been turned off --- and the kali boot stick still won't boot from either usb port ---  then I suggest re-making the Kali iso installation stick on the AO1-431 itself in the Windows environment using Rufus freeware. The stick must be prepared from the iso using GPT partition scheme, FAT32 format for a UEFI bootstrapper.

    Jack E/NJ

  • Lightnin
    Lightnin Member Posts: 18 Troubleshooter
    Leostat said:
    What's the full kernel line you are using when you get that? And is it static or blinking? 

    Try hitting cntrl + alt + f1.  Through F10, see if any of the other TTYs respond 
    That was in failsafe mode plus what you suggested. Will see about trying that when I have a moment later thanks.  
  • Lightnin
    Lightnin Member Posts: 18 Troubleshooter
    JackE said:
    If a BIOS supervisor password has been set -- and secure boot has been turned off --- and the kali boot stick still won't boot from either usb port ---  then I suggest re-making the Kali iso installation stick on the AO1-431 itself in the Windows environment using Rufus freeware. The stick must be prepared from the iso using GPT partition scheme, FAT32 format for a UEFI bootstrapper.
    Will likely have to wait till next week to give that a go, going to get a new usb for that. 
    thanks for the suggestion. Do you think a 64gig thumb drive would be good for this or a 32 would work better for the interface in terms of compatibility or does that matter?
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Answer ✓
    No, a plain vanilla 16GB USB is actually preferred for FAT32. Bigger capacities often cause issues.

    Jack E/NJ

  • Lightnin
    Lightnin Member Posts: 18 Troubleshooter
    JackE said:
    No, a plain vanilla 16GB USB is actually preferred for FAT32. Bigger capacities often cause issues.
    Thanks, it’s been a while since I played with that. Hopefully tomorrow will see and let you know. Didn’t mean to “accept answer.” Hopefully that won’t affect the thread. 

  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    Hows it going :)? any new errors showing?
  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
    @Lightnin

    Have you hit F9 ( Load Optimized Defaults) and then F10 (Save and Exit) in BIOS before trying to boot.
  • Lightnin
    Lightnin Member Posts: 18 Troubleshooter
    Leostat said:
    Hows it going :)? any new errors showing?
    Thanks for checking. Haven’t had an opportunity unfortunately to check. Ended up having to go out of state. When I get back will likely be tomorrow to try