Switch Alpha 12 Touchscreen Replacement

icman
icman Member Posts: 4 New User
Hi all,

The Switch Alpha 12 apparently comes in two hardware versions, creatively named version 1 and version 2.  Each have different mounting points for boards and such.  I have a broken touchscreen that needs to be replaced.  How can I figure out which hardware version I have, which I need to know in order to purchase the correct touchscreen assembly, without opening the case first?  Is it based on the manufacturing date of the unit?  I did not see anything on the identifier strip under the stand that says which HW version the unit is.

Thanks for your help!

Answers

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    You may be seeing a SA5-271/SA5-271P vs Switch 5. The Switch 5 had pretty much the same specs...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • icman
    icman Member Posts: 4 New User
    edited May 2021
    Original New lcd display assembly for ACER SA5 271 Switch Alpha 12 Touch display N16P3|Laptop LCD Screen| - AliExpress

    This links to the Switch Alpha 12 SA5-271, N16P3.  It shows two versions of the LCD assembly.  I am hoping that there is a way to tell which is which without opening the case and disassembling the unit.  That way, I don't have to disassemble the unit until the new LCD arrives.

    Could it be the difference between the i3 version and the i5 version of the Switch Alpha 12?
  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    I don't see any functional difference between the two, but ask the vendor to see for sure. The difference looks like it's just where the metal frame around the display is mounted to the bezel...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.