Is it a KG241P or KG241?Query-SNID on acer website I get KG241 but in device manager it shows KG241P

Hassan_ali42424
Hassan_ali42424 Member Posts: 4 New User
edited November 17 in Monitors

I have an issue with kg241 monitor. When I search the SNID on acer website I get the page for KG241 but when I open device manager it shows as KG241P the back says KG241 and under it says KG241 Pbmidpx. I want to install drivers for KG241 it says best drivers are already installed but when i install KG241P drivers it installs normally. I've been having an issue when plugging the monitor through DP cable it barely works and when it works the highest resolution is 1440x900 and if I force it to 1080p it looks really bad and definitely not 1080p and the refresh rate is @60HZ if I set it any higher it says no signal. I thought it was a driver problem but as I explained I'm not even sure what the correct driver is and only the drivers for KG241P installs and with the above issue persisting.

when I plug it through HDMI it works just fine with 1080p 120HZ.

I have tried:

  • Reinstalling graphics drivers
  • Reinstalling monitor drivers
  • Tested the cable on another display and case
  • Updated windows drivers
  • Formatting windows

If anyone has any suggestion, I'll be happy to try them

[Edited the topic title to include the topic issue.]

Answers

  • billsey
    billsey ACE Posts: 34,584 Trailblazer
    edited November 18

    There have been a lot of different KG241 models over the years. The P shows sort of which year it was introduced and the bmidpx define the options installed… It sounds like your DP cable is bad…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Hassan_ali42424
    Hassan_ali42424 Member Posts: 4 New User

    Thanks for commenting.

    I have tested the same cable on a different monitor and PC and it works fine even at 1080p 165Hz

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    What graphics card do you have? The base specs on the monitor should be 1920x1080 at 60, 120 or 144Hz on the DP connection. Have you tried an HDMI or DVI connection?

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Hassan_ali42424
    Hassan_ali42424 Member Posts: 4 New User

    I have a GTX 1060 6G. When i plug it through HDMI it works flawlessly 1080p @120 Hz. It's just that when I plug it though DP cable it only does 1080p@60 Hz and it's really bad quality image like it's very pixely and if I go higher than 60 Hz it doesn't work.

    I have ordered a DVI cable just so I can have dual monitor. I'll try it when I get it

  • Hassan_ali42424
    Hassan_ali42424 Member Posts: 4 New User

    So I upgraded the graphics card from GTX 1060 to RX 6600XT and now its working fine 1080p@144Hz so I guess the GPU DP slot was cursed somehow.

    Thanks everyone for replying