Add a second drive to a TC-875-UR15? I'd prefer a HDD because once a SSD dies cannot be recovered

Pops3
Pops3 Member Posts: 15 Troubleshooter

I always try to have at least one extra HDD/SSD on my computers for recovery, junk files, and working files. Can a second drive be installed into a TC-875-UR15? I'd prefer a HDD because once a SSD dies everything is gone and cannot be recovered.

[Edited the thread to add issue detail]

Answers

  • StevenGen
    StevenGen ACE Posts: 12,485 Trailblazer

    The TC-875 desktop only has provisions for a 1x M.2 SSD boot drive and 3x SATA-3 mechanical or SSD 2.5" drives or 3.5" mechanical drives for additional storage, the M.2 SSD slot is at #8 and the SATA-3 slots are at #13. Good luck and hope this helps you out.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • Larryodie
    Larryodie Member Posts: 1,743 Community Aficionado WiFi Icon

    If you look in a plastic bag that came with the computer, you may find a data cable (along with some brackets). That cable will work and (my TC-895) had a DVD installed with a spare Power Cable.

    Mounting was easy for my SSD as I just use cable ties around an existing cable as it has no moving parts.

    Mechanical HD will have to be mounted level.

    SSD is much much much faster. Back it up every so often to a external hard drive.

    This was the instructions

    This is from Crucial

    How to Initialize Your SSD for Windows®

    Before you can use your new SSD you have to initialize and partition it. If you are performing a clean installation of your operating system, or cloning to your SSD, it is not neccessary to follow these steps. A clean installation of your operating system or cloning to an SSD will initialize and partition the new SSD.

    Note: if you simply need to format/reformat a drive, only steps 5-9 below will be needed, assuming your SSD has previously been initialized. 

    1. Attach the SSD as a secondary drive and load Windows from your existing drive.
    2. In Windows 7 and earlier, open Disk Management by right clicking on Computer and selecting Manage, then Disk Management.
    3. In Windows 8 and later, move the mouse to the lower left corner of your desktop and right-click on the Start icon, then select Disk Management.
    4. When Disk Management opens, a pop-up will appear and prompt you to initialize the SSD.
    5. Select GUID partition table (GPT) and click OKMBR (Master Boot Record) is best for certain legacy software compatibility, but GPT is better for modern systems and higher capacity storage devices.
    6. Right-click in the area that says Unallocated and select New Simple Volume...
    7. The New Simple Volume Wizard will open, click Next.
    8. Leave the Specify Volume Size as the maximum (default value) and click Next.
    9. Select a Drive Letter and click Next.
    10. In the Format Partition screen, decide on a Volume label (the name you want to give the drive) and click Next.

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    Note the "If you are performing a clean installation of your operating system, or cloning to your SSD, it is not neccessary[sic] to follow these steps." Since in most cases you are doing one or the other, just ignore the rest. :)

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Pops3
    Pops3 Member Posts: 15 Troubleshooter

    Thank you one and all. Got a Samsung EVO Pro installed easy-peasy.

  • Larryodie
    Larryodie Member Posts: 1,743 Community Aficionado WiFi Icon

    I only used mine for data/mostly pictures and never tried to use it as a boot drive. I also pay Google Drive for cloud storage .