Nitro AN515-43 How can I enable Legacy boot when the option does not appear in the BIOS?

Anthos
Anthos Member Posts: 2 New User
edited July 2022 in Nitro Gaming
Hello,

On my Acer Nitro AN515-43 I have had a nightmare trying to figure out how to enable Legacy Boot. As shown in the picture, Only UEFI appears in the menu. I have already tried setting a supervisor password in security and disabling secure boot, but it makes no difference. Some help would be much appreciated

{Thread was edited to add model name to the title}

Best Answer

Answers

  • StevenGen
    StevenGen ACE Posts: 12,651 Trailblazer
    Anthos said:
    Hello,

    On my Acer Nitro AN515-43 I have had a nightmare trying to figure out how to enable Legacy Boot. As shown in the picture, Only UEFI appears in the menu. I have already tried setting a supervisor password in security and disabling secure boot, but it makes no difference. Some help would be much appreciated

    Below is the Acer bios Boot Tab SG guide for your Nitro AN515-43 so follow the explanation of what each does for the bios for your Nitro. have a look here also for a previous community guide if you want to change your Nitro AN515-43 to legacy and install Win-7? Which I don't know why you would want a legacy mode bios in a laptop that can handle Win-11 perfectly and you want to change it to an inferior bios like legacy mode? 

    Boot Tab

    The Boot tab allows the user to configure the order of boot devices used to load the operating system.
    Use ↑ and ↓ keys to select a device and press F5 or F6 to change the value.




  • batmalin
    batmalin Member Posts: 4,231 Guru
    Answer ✓
    You can`t this option is hidden, only if you get service BIOS somehow, or if you mod your BIOS you will be able to do that.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158